Cone motion viscosity and optical second harmonic generation of ferroelectric liquid crystalline dendrimers

We report second harmonic generation in a ferroelectric liquid crystalline trimer and ferroelectric liquid crystalline dendrimers of first, second and third generation. Thin cells were filled with the compounds by capillary forces at elevated temperature, and cooled from the surface stabilized ferroelectric state to below the glass transition temperature, while kept in an electric field. The cone motion viscosity and the threshold electric field for unwinding of the helix axis of the chiral tilted smectic mesophases were studied separately at elevated temperature, and these data were used to optimize the preparation of the films. The measured response time was between 0.3 and 3ms, which corresponds to a cone motion viscosity between 0.5 and 50 Pa s. Second harmonic generation was studied both at elevated temperature with an electric field and at room temperature with and without electric field. The first generation dendrimer exhibited a strong increase in the second order non-linear optical response with time at room temperature. The d ₂₃-coefficient of this dendrimer was approximately four times larger than for the other macromolecules and was 0.045 pm V^-1. The relatively large d-coefficient of the first generation dendrimer is ascribed to crystallization, which improved the orientation of the molecular dipoles.     

Encapsulation of complementary model drugs in spray-dried nanostructured materials

Two model drugs of different physico-chemical and pharmaceutical properties (ibuprofen, acetaminophen) have been incorporated together or separately in silica-based microspheres using sol–gel and spray-drying processes. A variable amount of a neutral surfactant Brij-56© has also been added. The properties of the microspheres vary significantly depending on their composition. Three kinds of texture are identified: (1) silica containing spheroid nano-domains (formed by ibuprofen; diameters between 20 and 100 nm), (2) silica containing worm-like mesophases (formed by Brij-56© and both model drugs, typical correlation distances ~6 nm), (3) silica intimately mixed with the drug (acetaminophen) without visible phase-separation. The kinetics of drug release in simulated intestinal fluid strongly depend on these textures. The association of ibuprofen and acetaminophen in a single type of microsphere and without surfactant favours a concomitant release. Possible mechanisms of materials’ formation are discussed.     

Small D–π–A Systems with o‐Phenylene‐Bridged Accepting Units as Active Materials for Organic Photovoltaics

Donor–acceptor (D–π–A) systems that combine triarylamine donor blocks and dicyanovinyl (DCV) acceptor groups have been synthesized. Starting from the triphenylamine (TPA)? thiophene? DCV compound ( 1 ) as a reference system, various synthetic approaches have been developed for controlling the light‐harvesting properties and energy levels of the frontier orbitals in this molecule. Thus, the introduction of methoxy groups onto TPA, the replacement of one phenyl ring of TPA by a thiophene ring, or the extension of the π‐conjugating spacer group lead to the modulation of the HOMO level. On the other hand, the fusion of the DCV group onto the vicinal thiophene ring by an ortho‐phenylene bridge allows for a specific fine‐tuning of the LUMO level. The electronic properties of the molecules were analyzed by using UV/Vis spectroscopy and cyclic voltammetry and the compounds were evaluated as donor materials in basic bilayer planar heterojunction solar cells by using C₆₀ as acceptor material. The relationships between the electronic properties of the donors and the performance of the corresponding photovoltaic devices are discussed. Bilayer planar heterojunction solar cells that used reference compound 1 and C₇₀ afforded power‐conversion efficiencies of up to 3.7 %.     

Boronate Ligands in Materials: Determining Their Local Environment by Using a Combination of IR/Solid‐State NMR Spectroscopies and DFT Calculations

Boronic acids (R‐B(OH)₂) are a family of molecules that have found a large number of applications in materials science. In contrast, boronate anions (R‐B(OH)₃^?) have hardly been used so far for the preparation of novel materials. Here, a new crystalline phase involving a boronate ligand is described, Ca[C₄H₉‐B(OH)₃]₂, which is then used as a basis for the establishment of the spectroscopic signatures of boronates in the solid state. The phase was characterized by IR and multinuclear solid‐state NMR spectroscopy (¹H, ¹³C, ¹¹B and ⁴³Ca), and then modeled by periodic DFT calculations. Anharmonic OH vibration frequencies were calculated as well as NMR parameters (by using the Gauge Including Projector Augmented Wave—GIPAW—method). These data allow relationships between the geometry around the OH groups in boronates and the IR and ¹H NMR spectroscopic data to be established, which will be key to the future interpretation of the spectra of more complex organic–inorganic materials containing boronate building blocks.     

Reversible Control over Molecular Recognition in Surface‐Bound Photoswitchable Hydrogen‐Bonding Receptors: Towards Read–Write–Erase Molecular Printboards

The synthesis of an anthracene‐bearing photoactive barbituric acid receptor and its subsequent grafting onto azide‐terminated alkanethiol/Au self‐assembled monolayers by using an Cu^I‐catalyzed azide–alkyne reaction is reported. Monolayer characterization using contact‐angle measurements, electrochemistry, and spectroscopic ellipsometry indicate that the monolayer conversion is fast and complete. Irradiation of the receptor leads to photodimerization of the anthracenes, which induces the open‐to‐closed gating of the receptor by blocking access to the binding site. The process is thermally reversible, and polarization‐modulated IR reflection–absorption spectroscopy indicates that photochemical closure and thermal opening of the surface‐bound receptors occur in 70 and 100 % conversion, respectively. Affinity of the open and closed surface‐bound receptor was characterized by using force spectroscopy with a barbituric‐acid‐modified atomic force microscope tip.     

Principal hierarchies of infinite-dimensional Frobenius manifolds: The extended 2D Toda lattice

We define a dispersionless tau-symmetric bihamiltonian integrable hierarchy on the space of pairs of functions analytic inside/outside the unit circle with simple poles at 0/∞$0/\infty$ respectively, which extends the dispersionless 2D Toda hierarchy of Takasaki and Takebe. Then we construct the deformed flat connection of the infinite-dimensional Frobenius manifold _M0$M_0$ introduced by Carlet, Dubrovin and Mertens (2011) [3] and, by explicitly solving the deformed flatness equations, we prove that the extended 2D Toda hierarchy coincides with principal hierarchy of _M0$M_0$.     

Synthesis of substituted 1-trifluoromethyl and 1-perfluoroalkyl-3-(arylamino)prop-2-en-1-one: advances in the mechanism of Combes 2-trifluoromethyl and 2-perfluoroalkyl quinolines synthesis

We report a new synthesis and our study of the mechanism of formation of substituted 1-trifluoromethyl and 1-perfluoroalkyl-3-(phenylamino)prop-2-en-1-one starting from 3-(R-phenoxy)-3-perfluoroalkyl-prop-2-enals and arylamines. Reactivity study of the intermediates confirmed that 3-perfluoroalkyl-N,N′-diphenyl-1,5-diazapentadienes are the synthetic intermediates of the synthesis of 2-perfluoroalkylquinolines. The mechanism of the reaction of 1-trifluoromethyl and 1-perfluoroalkyl-3-(phenylamino)prop-2-en-1-one with POCl₃ was studied. To our knowledge this is the first detection and isolation of N,N′-diaryldiazapentadiene derivatives as intermediates in the Combes F-alkyl substituted quinoline synthesis starting from enaminoketones. Finally, we succeeded isolating and identifying unsymmetrically substituted 2-perfluorolakyldiazapentadiene.