Highly Enantioselective Synthesis of 1,2,3‐Substituted Cyclopropanes by Using α‐Iodo‐ and α‐Chloromethylzinc Carbenoids

Herein, we report the enantio‐ and diastereoselective formation of trans‐iodo‐ and trans‐chlorocyclopropanes from α‐iodo‐ and α‐chlorozinc carbenoids by using a dioxaborolane‐derived chiral ligand. The synthetically useful iodocyclopropane building blocks were derivatized by an electrophilic trapping of the corresponding cyclopropyl lithium species or a Negishi coupling to give access to a variety of enantioenriched 1,2,3‐substituted cyclopropanes. The synthetic utility of this method was demonstrated by the formal synthesis of an HIV‐1 protease inhibitor. In addition, the related stereoselective bromocyclopropanation was also investigated. New insights about the relative electrophilicity of haloiodomethylzinc carbenoids are also presented.     

Analysis of the local structure of phosphorus-substituted LAMOX oxide ion conductors

The effect of partial substitution of molybdenum by phosphorus on the global and local structural arrangement of the fast oxide-ion conductor La(2)Mo(2)O(9) (LAMOX) has been studied by X-ray powder diffraction as well as (139)La and (31)P solid state NMR. The diffraction patterns show that La(2)Mo(2-y)P(y)O(9-y/2) forms a solid solution at low phosphorus concentrations, and that there is a structural phase transition upon increasing phosphorus concentration. This phase transition is also reflected in (139)La and (31)P NMR spectra. The possibility to excite (31)P multiple-quantum coherences of one of the (31)P NMR signals gives evidence of an accumulation of phosphorus atoms on neighbouring Mo-type sites already before formation of three-dimensional precipitates. On the basis of our X-ray and NMR results we propose a possible structural arrangement of the compound La(2)Mo(2-y)P(y)O(9-y/2) that explains the experimental observations by crystal twinning.     

Pigments and enamelling/gilding technology of Mamluk mosque lamps and bottle

On‐site Raman spectroscopy is used to investigate four mosque lamps and a bottle dating back to the 13–14th centuries (Syria and/or Egypt, Mamluk period) from the Department of Islamic Art, Musée du Louvre, Paris. The pigments and the enamelled glass matrix have been identified in order to discuss their technology. A comparison is made with one masterpiece from the 19th century made by Brocard. The results obtained for blue (lapis lazuli or Co‐coloured glass), yellow (Naples yellows or zinc/chrome yellow), green (mixture of the aforementioned blue and yellow pigments or lead chromate for restorated foot) red (hematite), white (cassiterite or arsenate) and pink (hematite and cassiterite) pigments are presented. The consistency of the pigments period of use/technology with the datation proposed for each artefact is evaluated. For one lamp, the detection of quartz in some places of the hematite‐rich glassy layer supporting the gold is related to the search of a physical bonding with the artefact body. Carbon residues in such enamel are consistent with the use of an organic medium to place the enamel powder before the firing. Copyright © 2012 John Wiley & Sons, Ltd.     

Predicting initial erosion during the hole erosion test by using turbulent flow CFD simulation

CFD simulation with enhanced modeling of turbulence and near-wall treatment is used to model water–clay mixtures flowing through a cylindrical pipe domain. Effects on the wall-shear stress resulting from varying water clay content and applied hydraulic gradient are analyzed. Various parametric studies were performed and had shown that the two-dimensional modelling introduced in the present study does not yield a uniform wall-shear stress along the pipe wall and that clay concentration affects significantly the wall-shear stress value. This is in contrast with the common hypothesis used in one-dimensional modeling approaches where this stress is assumed constant and which gives rise to uniform erosion along the pipe wall. The obtained results had enabled predicting more realistically erosion amount and had allowed for understanding the irregular eroded hole wall shape as observed experimentally after performing the standard hole erosion test.     

An exact method with variable fixing for solving the generalized assignment problem

We propose a simple exact algorithm for solving the generalized assignment problem. Our contribution is twofold: we reformulate the optimization problem into a sequence of decision problems, and we apply variable-fixing rules to solve these effectively. The decision problems are solved by a simple depth-first lagrangian branch-and-bound method, improved by our variable-fixing rules to prune the search tree. These rules rely on lagrangian reduced costs which we compute using an existing but little-known dynamic programming algorithm.     

Adsorption of acetaldehyde on ice as seen from computer simulation and infrared spectroscopy measurements

Detailed investigation of the adsorption of acetaldehyde on I(h) ice is performed under tropospheric conditions by means of grand canonical Monte Carlo computer simulations and compared to infrared spectroscopy measurements. The experimental and simulation results are in a clear accordance with each other. The simulations indicate that the adsorption process follows Langmuir behavior in the entire pressure range of the vapor phase of acetaldehyde. Further, it was found that the adsorption layer is strictly monomolecular, and the adsorbed acetaldehyde molecules are bound to the ice surface by only one hydrogen bond, typically formed with the dangling H atoms at the ice surface, in agreement with the experimental results. Besides this hydrogen bonding, at high surface coverages dipolar attraction between neighboring acetaldehyde molecules also contributes considerably to the energy gain of the adsorption. The acetaldehyde molecules adopt strongly tilted orientations relative to the ice surface, the tilt angle being scattered between 50° and 90° (i.e., perpendicular orientation). The range of the preferred tilt angles narrows, and the preference for perpendicular orientation becomes stronger upon saturation of the adsorption layer. The CH(3) group of the acetaldehyde molecules points as straight away from the ice surface within the constraint imposed by the tilt angle adopted by the molecule as possible. The heat of adsorption at infinitely low coverage is found to be -36 ± 2 kJ/mol from the infrared spectroscopy measurement, which is in excellent agreement with the computer simulation value of -34.1 kJ/mol.     

Chemical details on nucleolipid supramolecular architecture: molecular modeling and physicochemical studies

Nucleolipids are currently under investigation as vectors for oligonucleotides (ON) delivery thanks to their supramolecular organization properties and their ability to develop specific interactions (i.e., stacking and potential Watson and Crick hydrogen bonds) for lipoplexes formation. To investigate the factors that govern the interaction events at a molecular level and optimize nucleolipid chemical structures, physicochemical experiments (tensiometry, AFM, BAM, and ellipsometry) combined with molecular dynamics simulation were performed on a series of zwitterionic nucleolipids (PUPC, DPUPC, PAPC) featuring a phosphocholine chain (PC). After construction and initial equilibration, simulations of pure nucleolipid bilayers were run for 100 ns at constant temperature and pressure, and their properties were compared to experimental data and to natural dipalmitoylphosphatidylcholine (DPPC) bilayers. Nucleolipid-based membranes are significantly more ordered and compact than DPPC bilayers mainly due to the presence of many intermolecular interactions between nucleoside polar heads. The hydrophilic phosphocholine moieties connected to the 5' hydroxyls are located above the bilayers, penalizing nucleic bases accessibility for further interactions with ON. Hence, a neutral nucleolipid (PUOH) without hydrophilic phosphocholine was inserted in the membranes. Simulations and experimental analysis of nucleolipid membranes in interaction with a single strand RNA structure indicate that PUOH interacts with ON in the subphase. This study demonstrates that molecular modeling can be used to determine the interactions between oligonucleotide and nucleolipids.     

Water Absorption of Poly(methyl methacrylate) Measured by Vertical Interference Microscopy

PMMA (poly(methyl methacrylate)) is widely used to prepare orthopedic cements. They are in direct contact with cells and body fluids. PMMA, despite its hydrophobic nature, can absorb ～2% w/w water. We have evaluated by vertical interference microscopy if water absorption can produce a significant swelling in different types of PMMA blocks: pure, with a plasticizer, with a cross-linker, and in two types of commercial bone cements. Graphite rods which do not swell in water were used as internal standard. Hardness, indentation modulus, plastic, and elastic works were determined by nanoindentation under a 25mN fixed force. Vertical interference microscopy was used to image the polymer in the dry state and hydrated states (after 24 h in distilled water). On the surface of the polished polymers (before and after hydration), we measured roughness by the fractal dimension, the swelling in the vertical and the lateral directions. For each polymer block, four images were obtained and values were averaged. Comparison and standardization of the images in the dry and hydrated states were done with Matlab software. The average value measured on the graphite rod between the two images (dried and hydrated) was used for standardization of the images which were visualized in 3D. After grinding, a small retraction was noticeable between the surface of the rod and the polymers. A retraction ring was also visible around the graphite rod. After hydration, only the pure PMMA and bone cements had a significant swelling in the vertical direction. The presence of polymer beads in the cements limited the swelling in the lateral direction. Swelling parameters correlated with the nanoindentation data. PMMA can swell by absorbing a small amount of water and this induces a swelling that varies with the polymer composition and particle inclusions.