An experimental and kinetic modeling study on the oxidation of 1,3-dioxolane

The modern catalytic or enzymatic advances allow the production of novel biofuel. Among them, 1,3-dioxolane can be produced from formaldehyde and ethylene glycol, both can be obtained from biomass. In this study, the oxidation of 1,3-dioxolane is studied at stoichiometric conditions. The ignition delay times of 1,3-dioxolane/O₂/inert mixtures were measured in a shock tube and in a rapid compression machine at pressures of 20 to 40 bar and temperatures ranging from 630 to 1300 K. The pressure profiles recorded in the rapid compression machine show a first stage of ignition enlightening the influence of the low temperature chemistry of combustion. Furthermore, mole fraction profiles of the stable intermediates produced during the oxidation of 1,3-dioxolane were measured in a jet-stirred reactor at 10 bar. Following these observations, a detailed kinetic model was developed with reaction rate coefficients and thermochemical data calculated by theoretical calculations or estimated by analogies to suitable molecules. In order to get an insight into the most important reaction pathways brute force sensitivity analysis and reaction pathway analysis were performed with the proposed model and discussed. It became clear that in the fuel-in-air case for the alkylhydroperoxide of 1,3-dioxolane the ring opening beta-scission pathway is favored against the further alkane-like second addition to molecular oxygen, which leads to a limited negative temperature coefficient.     

Fast reproducible identification and large-scale databasing of individual functional cognitive networks

Background  

Although cognitive processes such as reading and calculation are associated with reproducible cerebral networks, inter-individual variability is considerable. Understanding the origins of this variability will require the elaboration of large multimodal databases compiling behavioral, anatomical, genetic and functional neuroimaging data over hundreds of subjects. With this goal in mind, we designed a simple and fast acquisition procedure based on a 5-minute functional magnetic resonance imaging (fMRI) sequence that can be run as easily and as systematically as an anatomical scan, and is therefore used in every subject undergoing fMRI in our laboratory. This protocol captures the cerebral bases of auditory and visual perception, motor actions, reading, language comprehension and mental calculation at an individual level.     

Thermal stability of alkoxy monolayers grafted on Si(1 1 1)

Direct grafting of organic monolayers on Si is of prime interest in order to give specific properties to a silicon surface. However, for microelectronics applications, this possibility is hampered by the limited stability of the grafted layers. It has been previously established that alkyl layers attached to Si surfaces through Si-C bonds become unstable at 250-300 °C, by desorption of alkenes. Changing the nature of the bonding to the surface might allow one to circumvent this desorption pathway and increase the layer stability. In our work, decanol and decyl aldehyde are reacted with the Si(1 1 1)-H surface at ∼100 °C during 20 h in order to obtain alkoxy monolayers. FTIR measurements performed in ATR geometry show that the grafted molecule surface coverage is on the order of 33% after reaction with decanol and 50% after reaction with decyl aldehyde. Characterization by AFM essentially reveals that the morphology of the grafted surfaces is unaffected as compared to that of Si-H surfaces. However, the edges of the terraces at alcohol-grafted surfaces exhibit some pitting, probably due to the presence of water in the grafting liquid. Thermal stability studies show that alkoxy chains progressively disappear from the Si surface between 200 and 400 °C. From the CH₂/CH₃ ratio in the CH region (2760-3070 cm⁻¹), it appears that the chains undergo progressive dissociation by C-C bond breaking before their complete disappearance from the surface. Therefore, the thermal behaviour of alkoxy monolayers appears quite distinct from that of alkyl monolayers that tend to leave the surface in a much narrower temperature range (250-350 °C), essentially via breaking of the Si-C bonds.     

Rains of solitons in a figure-of-eight passively mode-locked fiber laser

We report experimental observation of rains of solitons in figure-of-eight fiber laser passively mode-locked through nonlinear optical loop mirror. Soliton pulses are created from an extended noisy background and drift until they reach a condensed phase comprising several tens of aggregated solitons. The observation of this dynamics tends to strengthen the idea of the universality of the collective behavior of solitons.     

Comparative measurements of loudspeakers in a listening situation

Comparison of loudspeakers is a major concern during design or product selection. There are several standards for the measurement of loudspeaker characteristics, but none of them provides hints for a rigorous comparison between devices. In this study, different ways of evaluating acoustical dissimilarity between loudspeakers were compared. Several methods of signal analysis were used, and for each method a metric evaluating the dissimilarity between two signals was defined. The correlation between the different dissimilarity evaluations over a significant panel of loudspeakers led to identified classes of measurements. A specific aspect of this work is that measurements were performed in a standard listening environment, rather than in an anechoic or reverberant one. It allowed the use of the recorded signals for a simple listening test, providing a perceptual metric which was compared to the acoustical ones. It also allowed the introduction of auditory models in the computation of some acoustical metrics, so defining a new class of measurements which gave results close to the perceptual ones.     

Impact of slow gain dynamics on soliton molecules in mode-locked fiber lasers

We theoretically demonstrate and experimentally confirm the major influence of gain dynamics on soliton molecules that self-assemble in mode-locked lasers. Both slow gain recovery and depletion play a pivotal role in the formation of chirped soliton molecules characterized by an increasing separation from leading to trailing pulses. These chirped molecules actually consist of many pulses and may be termed macromolecules. They are experimentally observed in a fiber laser and numerically modeled by an approach that properly includes the slow gain dynamics. Furthermore, it is shown that these processes stabilize soliton trains in fiber lasers by inhibiting internal oscillations.     

Real-time increase in depth of field of an uncooled thermal camera using several phase-mask technologies

Imaging systems that combine a phase mask in the pupil and digital postprocessing may have better performance than conventional ones. We have built such a system to enhance the depth of field of an uncooled thermal camera. The phase masks are binary, their structures are optimized thanks to an image quality criterion, and they have been realized with three different technologies that give equivalent results. The deconvolution postprocessing is performed in real time with a graphics processing unit. A significant increase of the depth of field of a factor 3 has been obtained.     

Bell's theorem based on a generalized EPR criterion of reality

First, the demonstration of Bell's theorem, i.e., of the nonlocal character of quantum theory, is spelled out using the EPR criterion of reality as premises and a gedankenexperiment involving two particles. Then, the EPR criterion is extended to include quantities predicted almostwith certainty, and Bell's theorem is demonstrated on these new premises. The same experiment is used but in conditions that become possible in real life, without the requirements of ideal efficiencies and zero background. Very high efficiencies and low background are needed, but these requirements may be met in the future.