Dihydrogen complexes of rhodium: [RhH2(H2)x (PR3)2]+ (R = Cy, iPr; x = 1, 2)

Addition of H2 (4 atm at 298 K) to [Rh(nbd)(PR3)2][BAr(F)4] [R = Cy, iPr] affords Rh(III) dihydride/dihydrogen complexes. For R = Cy, complex 1a results, which has been shown by low-temperature NMR experiments to be the bis-dihydrogen/bis-hydride complex [Rh(H)2(eta2-H2)2(PCy3)2][BAr(F)4]. An X-ray diffraction study on 1a confirmed the {Rh(PCy3)2} core structure, but due to a poor data set, the hydrogen ligands were not located. DFT calculations at the B3LYP/DZVP level support the formulation as a Rh(III) dihydride/dihydrogen complex with cis hydride ligands. For R = iPr, the equivalent species, [Rh(H)2(eta2-H2)2(P iPr3)2][BAr(F)4] 2a, is formed, along with another complex that was spectroscopically identified as the mono-dihydrogen, bis-hydride solvent complex [Rh(H)2(eta2-H2)(CD2Cl2)(P iPr3)2][BAr(F)4] 2b. The analogous complex with PCy3 ligands, [Rh(H)2(eta2-H2)(CD2Cl2)(PCy3)2][BAr(F)4] 1b, can be observed by reducing the H2 pressure to 2 atm (at 298 K). Under vacuum, the dihydrogen ligands are lost in these complexes to form the spectroscopically characterized species, tentatively identified as the bis hydrides [Rh(H)2(L)2(PR3)2][BAr(F)4] (1c R = Cy; 2c R = iPr; L = CD2Cl2 or agostic interaction). Exposure of 1c or 2c to a H2 atmosphere regenerates the dihydrogen/bis-hydride complexes, while adding acetonitrile affords the bis-hydride MeCN adduct complexes [Rh(H)2(NCMe)2(PR3)2][BAr(F)4]. The dihydrogen complexes lose [HPR3][BAr(F)4] at or just above ambient temperature, suggested to be by heterolytic splitting of coordinated H2, to ultimately afford the dicationic cluster compounds of the type [Rh6(PR3)6(mu-H)12][BAr(F)4]2 in moderate yield.     

Two-dimensional condensation in camphor-10-sulphonic acid films at the mercury/electrolyte interface

The electrosorption properties of camphor-10-sulphonic acid (CS) in different electrolytes (Na₂SO₄, LiClO₄, KNO₃, KCl, KBr, KJ) were investigated experimentally by ac polarographic measurements at different temperatures. Depending on the type of electrolyte and on the temperature, film condensation was observed.The Frumkin interaction coefficient, determined from the critical degree of coverage, does not depend linearly on the reciprocal temperature as would be the case in correspondence to the temperature dependence of the pit width. This contradiction does not occur if the interaction coefficient is determined from the critical degree of coverage using the lattice gas model. The temperature dependence of the pit width of the differential capacity-potential curves, found in the experiment, can be theoretically described by both these models. The interaction coefficient in the models is inversely proportional to the temperature. Furthermore, the parameters of the standard free energy of adsorption, the interaction energy, the interaction coefficient of the Frumkin isotherm, the adsorption coefficient, and the maximal surface concentration of CS in the film were estimated and compared.     

Dichloracetylen als stabiler Komplexligand Die Kristallstruktur von PPh4[WCl5(C2Cl2)] · 0,5 CCl4

Dichloro Acetylene as Complex Ligand. Crystal Structure of PPh₄[WCl₅(C₂Cl₂)] · 0.5 CCl₄ Tungsten hexachloride and dichloro acetylenediethyletherate react in boiling CCl₄ in presence of C₂Cl₄ as reducing agent forming [Et₂O · WCl₄(C₂Cl₂)]. In vacuo the complex looses ether giving the dichloro acetylene complex [WCl₄(C₂Cl₂)]₂ which is dimeric with chloro bridges. Both complexes react with tetraphenylphosphonium chloride to form PPh₄[WCl₅(C₂Cl₂)] which is equally prepared by ligand exchange of PPh₄[WCl₅(C₂I₂)] with silver chloride. All dichloro acetylene complexes are red to brown crystalline solids sensitive to moisture, and are thermally and mechanically very stable compared with the highly explosive dichloro acetylene. The compounds are characterized by their i.r. spectra; [Et₂O · WCl₄(C₂Cl₂)] was additionally investigated by ¹³C-nmr spectroscopy. PPh₄[WCl₅(C₂Cl₂)] · 0.5 CCl₄ formes dark brown crystals; according to the structural investigation by X-ray diffraction methods the compound crystallizes orthorhombic in the space group Pbca with 8 formula units per unit cell (1317 observed, independent reflexions, R = 0.049). The cell dimensions are a = 1702 pm, b = 1675 pm and c = 2228 pm. The compound consists of [WCl₅(C₂Cl₂)]? anions and PPh₄⊕ cations including CCl₄ molecules without bonding interactions. The tungsten atoms are seven-coordinated by five chlorine atoms and two carbon atoms. The dichloro acetylene ligand is bonded symmetrically side-on and has a C? C bond length of 128 pm. The W? C distances are 201 pm, the four equatorial Cl atoms have W? Cl bond lengths of 234 pm whereas the chlorine atom in trans-position to the W? C₂ group is situated in a distance of 244 pm.     

Carbazole compounds as host materials for triplet emitters in organic light-emitting diodes: polymer hosts for high-efficiency light-emitting diodes

A carbazole homopolymer and carbazole copolymers based on 9,9'-dialkyl-[3,3']-bicarbazolyl, 2,5-diphenyl-[1,3,4]-oxadiazole and 9,9-bis(4-[3,7-dimethyloctyloxy]phenyl)fluorene were synthesized and their electrical and photophysical properties were characterized with respect to their application as host in phosphorescent polymer light-emitting diodes. It is shown that the triplet energy of a polymer depends on the specific connections between its building blocks. Without changing the composition of the polymer, its triplet energy can be increased from 2.3 to 2.6 eV by changing the way in which the different building blocks are coupled together. For poly(9-vinylcarbazole) (PVK), a carbazole polymer often used as host for high-energy triplet emitters in polymer light-emitting diodes, a large hole-injection barrier of about 1 eV exists due to the low-lying HOMO level of PVK. For all carbazole polymers presented here, the HOMO levels are much closer to the Fermi level of a commonly used anode such as ITO and/or a commonly used hole-injection layer such as PEDOT:PSS. This makes high current densities and consequently high luminance levels possible at moderate applied voltages in polymer light-emitting diodes. A double-layer polymer light-emitting diode is constructed comprising a PEDOT:PSS layer as hole-injection layer and a carbazole-oxadiazole copolymer doped with a green triplet emitter as emissive layer that shows an efficacy of 23 cd/A independent of current density and light output.     

Komplexe von Vanadium und Titan mit Salicylaldehyd-benzoylhydrazon und 2-(2′-Hydroxyphenyl)-chinolin-8-ol. Kristallstruktur von μ-Oxo-bis[oxo{2-(2′-Hydroxyphenyl)-chinolin-8-olato(2-)}-vanadium(V)]

Complexes of Vanadium and Titanium with Salicylaldehyde benzoylhydrazone and 2-(2′-Hydroxyphenyl)-8-quinolinol. Crystal Structure of μ-Oxo-bis[oxo{2-(2′-hydroxyphenyl)-8-quinolinato(2-)}-vanadium(V)] . By reaction of titanium(IV)-isopropoxide and bis(acetylacetonato)-oxovanadium(IV) with salicylaldehyde benzoylhydrazone and 2-(2′hydroxyphenyl)-8-quinolinol, respectively, the metal complexes of the tridentate diacidic ligands were synthesized and characterized mass spectrometrically. The mass spectra of the titanium compounds correspond to the expected bisligand complexes whereas several species are demonstrable in the case of vanadium. Crystals of μ-oxo-bis[oxo{2-(2′-hydroxyphenyl)-8-quinolinolato(2-)}-vanadium(V)] were isolated and characterized by X-ray structural analysis. The complex exhibits C₂ symmetry, accordingly the μ₂-oxygen atom is situated on the 4 axis. The VOV bridge is angular with the unusually small bond angle of 107.3°. The coordination polyhedron is distorted octahedral. The compound additionally contains one molecule of chloroform per formula unit which is disordered in two positions. Crystallographic data see “Inhaltsübersicht”.     

Electrocyclic ring opening reaction of a 1,3,4-oxadiazin-6-one into its azaketene tautomer

5-Methyl-2-phenyl-1,3,4-oxadiazin-6-one undergoes cycloaddition with 2-methylpropenylpyrrolidine. One of the cycloadducts is derived from the Diels-Alder reaction of a transient azaketene tautomer.     

Immunological determination of triazine pesticides bound to soil humic acids (bound residues)

An immunological method for the determination of triazine herbicides covalently bound to soil humic acids has been developed. A sandwich-immunoassay has been performed, based on both polyclonal humic acid-antibodies and monoclonal triazineantibodies. A peroxidase-labelled third antibody has been used for the photometric detection. A triazine-humic acid conjugate served as calibration standard. The coupling density for this conjugate has been determined by measuring the difference of free amino groups both with ninhydrin and with the trinitrobenzene sulfonic acid method. In addition, the coupling density has been confirmed by scintillation counting using a (14)C-atrazine derivative. Due to nonspecific interactions between antibody proteins and humic acids, different blocking steps had to be performed. Finally, the assay has been applied to a triazine contaminated soil sample. Humic acids (including bound residues) have been extracted by diluted sodium carbonate solution. Concentrations of bound atrazine residues have been found in the range of 2 mg/kg soil on fields where triazine herbicides has been applied over a period of 21 years. These results are comparable to both the applied amount and the nonextractable fraction.     

Characterization of a covalent triazine-humic acid conjugate by gas chromatography

The aim of the described method was the characterization of a “atrazine-mercaptopropionic acid” humic acid conjugate, which was required for the calibration of immunoassays to determine bound residues. In order to estimate the amount of bound triazine, an oxidative nucleophilic substitution reaction of the covalently linked “atrazine-mercaptopropionic acid” to a new triazine derivative “atrazine-methoxyethanol” was performed. This cleavage product was quantified by gas chromatography. The conditions for this cleavage procedure were optimized and applied to the “atrazine-mercaptopropionic acid” humic acid conjugate and to a humic acid blank. The amount of bound “atrazine-mercaptopropionic acid” was calculated to 16.6 ± 2.5 μmol triazine per gram humic acid, which is equivalent to 0.39 ± 0.07% atrazine. Received: 7 August 1997 / Accepted: 12 September 1997     

A Novel Anti-Inflammatory d-Peptide Inhibits Disease Phenotype Progression in an ALS Mouse Model

Amyotrophic lateral sclerosis (ALS) is a progressive neurodegenerative disease characterised by selective neuronal death in the brain stem and spinal cord. The cause is unknown, but an increasing amount of evidence has firmly certified that neuroinflammation plays a key role in ALS pathogenesis. Neuroinflammation is a pathological hallmark of several neurodegenerative disorders and has been implicated as driver of disease progression. Here, we describe a treatment study demonstrating the therapeutic potential of a tandem version of the well-known all-d-peptide RD2 (RD2RD2) in a transgenic mouse model of ALS (SOD1*G93A). Mice were treated intraperitoneally for four weeks with RD2RD2 vs. placebo. SOD1*G93A mice were tested longitudinally during treatment in various behavioural and motor coordination tests. Brain and spinal cord samples were investigated immunohistochemically for gliosis and neurodegeneration. RD2RD2 treatment in SOD1*G93A mice resulted not only in a reduction of activated astrocytes and microglia in both the brain stem and lumbar spinal cord, but also in a rescue of neurons in the motor cortex. RD2RD2 treatment was able to slow progression of the disease phenotype, especially the motor deficits, to an extent that during the four weeks treatment duration, no significant progression was observed in any of the motor experiments. Based on the presented results, we conclude that RD2RD2 is a potential therapeutic candidate against ALS.