The optical properties and energy transition process in nanocomposite of polyvinyl-pyrrolidone polymer and Mn-doped ZnS

This study has been carried out on the optical properties of polyvinyl-pyrrolidone (PVP), the energy transition process in nanocomposite of PVP capped ZnS:Mn nanocrystalline and the influence of the PVP concentration on the optical properties of the PVP capped ZnS:Mn nanocrystalline thin films synthesized by the wet chemical method. The microstructures of the samples were investigated by X-ray diffraction, the atomic absorption spectroscopy, and transmission electron microscopy. The results showed that the prepared samples belonged to the sphalerite structure with the average particle size of about 2–3 nm. The optical properties of samples are studied by measuring absorption, photoluminescence (PL) spectra and time-resolved PL spectra in the wavelength range from 200 to 700 nm at 300 K. From data of the absorption spectra, the absorption edge of PVP polymer was found about of 230 nm. The absorption edge of PVP capped ZnS:Mn nanoparticles shifted from 322 to 305 nm when the PVP concentration increases. The luminescence spectra of PVP showed a blue emission with peak maximum at 394 nm. The luminescence spectra of ZnS:Mn–PVP exhibits a blue emission with peak maximum at 437 nm and an orange–yellow emission of ion Mn²⁺ with peak maximum at 600 nm. While the PVP coating did not affect the microstructure of ZnS:Mn nanomaterial, the PL spectra of the PVP capped ZnS:Mn samples were found to be affected strongly by the PVP concentration.     

On the theta number of powers of cycle graphs

We give a closed formula for Lovász’s theta number of the powers of cycle graphs C _k ^d?1 and of their complements, the circular complete graphs K _k/d . As a consequence, we establish that the circular chromatic number of a circular perfect graph is computable in polynomial time. We also derive an asymptotic estimate for the theta number of C _k ^d .     

New indications of potential rat intestinal α-glucosidase inhibition by Syzygium zeylanicum (L.) and its hypoglycemic effect in mice

Research on Chemical Intermediates - Natural α-glucosidase inhibitors (aGIs) have been considered effective agents for type 2 diabetes management. In this study, Syzygium zeylanicum (L.)...     

Anticyanobacterial phenolic constituents from the aerial parts of Eupatorium fortunei Turcz

Four thymol derivatives and two phenolic compounds were isolated from the aerial parts of Eupatorium fortunei. The new structures were elucidated to be 7,8,9-trihydroxythymol (1), and 8,10-didehydro-7,9-dihydroxythymol (2) by means of MS and NMR analysis. The known compounds were identified as 8,9,10-trihydroxythymol (3), 10-acetoxy-8,9-dihydroxythymol (4), o-coumaric acid (5) and 4-(2-hydroxyethyl)benzaldehyde (6). Compound 3 showed strongest inhibitory effect on the growth of Microcystis aeruginosa in comparison with CuSO₄.     

Tribology of thin wetting films between bubble and moving solid surface

This work shows a successful example of coupling of theory and experiment to study the tribology of bubble rubbing on solid surface. Such kind of investigation is reported for the first time in the literature. A theory about wetting film intercalated between bubble and moving solid surface was developed, thus deriving the non-linear evolution differential equation which accounted for the friction slip coefficient at the solid surface. The stationary 3D film thickness profile, which appears to be a solution of the differential equation, for each particular speed of motion of the solid surface was derived by means of special procedure and unique interferometric experimental setup. This allowed us to determine the 3D map of the lift pressure within the wetting film, the friction force per unit area and the friction coefficient of rubbing at different speeds of motion of the solid surface. Thus, we observed interesting tribological details about the rubbing of the bubble on the solid surface like for example:     

Quantitative analysis of precious metals in automotive shredder residue/combustion residue via EDX fluorescence spectrometry

The recovery of precious metals from automotive shredder residue (ASR) dust/combustion residue is an option that is not usually considered due to the lack of available information. Therefore, before any disposal or recovery application can be considered, it is necessary to determine the significance of the levels and distribution of precious metal in ASR dust/ASR combustion residue. In the present study, quantitative analysis of precious metals (Pt, Pd, Au, Ag and Cu) in the ASR residue samples was performed using energy dispersive X-ray (EDX) fluorescence spectrometer. With the fundamental parameter (FP) method, the X-ray intensity is obtained and the quantitative analysis is performed using theoretical calculation. This method is very effective for quantitative analysis of unknown samples without standard samples. Further, in order to analyse the precious metal distribution within the ASR combustion residues, the microstructural characterisation and elemental mapping were also carried out with the aid of field emission scanning election microscopy combined with electron dispersive spectroscopy (FE-SEM EDS). Significant amount of Pt, Pd, Au, Ag and Cu element concentrations in the ASR residue were identified. Total precious (Pt, Pd, Au, Ag and Cu) metals obtainable values are representing about 12.23 wt% from its initial ASR dust/combustion residues. Considering their relevant concentrations, these metals should be properly recovered for recycling purposes before to dispose or landfill.     

Vertical dynamic response of non-uniform motion of high-speed rails

In this paper, a computational study using the moving element method (MEM) is carried out to investigate the dynamic response of a high-speed rail (HSR) traveling at non-uniform speeds. A new and exact formulation for calculating the generalized mass, damping and stiffness matrices of the moving element is proposed. Two wheel–rail contact models are examined. One is linear and the other nonlinear. A parametric study is carried out to understand the effects of various factors on the dynamic amplification factor (DAF) in contact force between the wheel and rail such as the amplitude of acceleration/deceleration of the train, the severity of railhead roughness and the wheel load. Resonance in the vibration response can possibly occur at various stages of the journey of the HSR when the speed of the train matches the resonance speed. As to be expected, the DAF in contact force peaks when resonance occurs. The effects of the severity of railhead roughness and the wheel load on the occurrence of the jumping wheel phenomenon, which occurs when there is a momentary loss of contact between the wheel and track, are investigated.     

Stability of coordination compounds of Co2+ and Ni2+ ions with maleic acid anion in aqueous isopropanol solutions

Composition and stability of coordination compounds of nickel(II) and cobalt(II) ions with maleic acid anion in aqueous isopropanol solutions (H₂O-IPA) of composition χ_IPA = 0–0.5 mole fraction was studied by potentiometric titration at ionic strength of 0.1 maintained with sodium perchlorate at 298.15 K. Monoligand complexes of Ni²⁺ and Co²⁺ ions with maleic acid anion become stronger when isopropanol content rises. In the solvent of the studied composition, Co²⁺ ions form less stable complexes than Ni²⁺ ions that corresponds to the Irving-Williams series established for aqueous solutions. Variations in complex stability are more expressed at small IPA content and differ within experimental error at χ_IPA = 0.5 mole fraction. Obtained results were compared with literature data for akin compounds.     

Plasmonic Hotspots in Air: An Omnidirectional Three‐Dimensional Platform for Stand‐Off In‐Air SERS Sensing of Airborne Species

Molecular‐level airborne sensing is critical for early prevention of disasters, diseases, and terrorism. Currently, most 2D surface‐enhanced Raman spectroscopy (SERS) substrates used for air sensing have only one functional surface and exhibit poor SERS‐active depth. “Aerosolized plasmonic colloidosomes” (APCs) are introduced as airborne plasmonic hotspots for direct in‐air SERS measurements. APCs function as a macroscale 3D and omnidirectional plasmonic cloud that receives laser irradiation and emits signals in all directions. Importantly, it brings about an effective plasmonic hotspot in a length scale of approximately 2.3 cm, which affords 100‐fold higher tolerance to laser misalignment along the z‐axis compared with 2D SERS substrates. APCs exhibit an extraordinary omnidirectional property and demonstrate consistent SERS performance that is independent of the laser and analyte introductory pathway. Furthermore, the first in‐air SERS detection is demonstrated in stand‐off conditions at a distance of 200 cm, highlighting the applicability of 3D omnidirectional plasmonic clouds for remote airborne sensing in threatening or inaccessible areas.