吸气式高超声速飞行器气动力气动热的数值模拟方法及应用

对吸气式高超声速飞行器而言,物面热流和摩阻的准确预测对飞行器设计及安全十分关键.介绍采用CFD准确预测气动力和气动热的方法,包括流动的控制方程、湍流模型及湍流的先进壁面函数边界条件,介绍流动的数值求解方法.对典型超声速层流和湍流流动的摩擦阻力和热流进行详细的验证与确认,考察CFD工具在使用先进壁面函数边界条件后,湍流计算的法向网格无关性能力.对设计的一种吸气式高超声速飞行器的气动力和气动热进行数值模拟,为飞行器的气动设计及热防护提供了可靠的数据.     

晶态-非晶态复合锂离子导体的电学性质

本文研究了晶态LiCl-非晶态Li₂O·3B₂O₃复合锂离子导体的电学性质。实验发现这种晶态-非晶态新型复合离子导体的电学性质变化具有新的现象,即在宏观电导率σ_m-组成曲线上出现了电导率增加的“双峰”效应。相应地,在表观活化能E_m-组成曲线和介电常数ε_m-组成曲线上出现了“双谷”。本文还详细讨论了这些实验现象,得到了与理论相符合的结果。关键词：     

MSM结构GaAs探测器的抗辐照性能

研究一种双金属接触的GaAs半导体探测器在14MeV中子辐照下的性能.测量了探测器经过10¹²n/cm²中子辐照剂量后的反向漏电流、电荷收集效率和最小电离粒子能谱,并且与⁶⁰Co 1.25MeV光子辐照的测量结果相比较.对中子辐照引起探测器时间性能变化和辐照损伤机制进行了探讨.并根据实验结果提出了这种双金属接触GaAs探测器灵敏层分布的一种假设,理论计算和实验数据相符合.     

低曝光条件下遥感相机微振动量检测

针对搭载平台颤振对遥感相机成像的影响,利用辅助高速面阵CCD相机拍摄高帧频图像序列,通过像元合并来补偿曝光时间不足,增加图像的亮度、对比度和信噪比,同时结合一种区域选择算法来选择用于计算的图像区域,最后使用灰度投影算法对振动位移量进行估计.实验数据表明,提出的改进算法误差为一个像元,在准确性和稳定性方面均明显优于原始算法.     

通过硼氢化-原位再结晶提高二异松莰烷基硼烷光学纯度的简便方法

本文叙述了由国产低光学纯(43.6%e e)(-)-α-蒎烯通过硼氢化-原位再结晶, 制备高光学纯(97.2%ee)(+)-二异松茨烷基硼烷(diisopinocampheylborane, Ipc2BH)的简便新方法。     

[Bmim]Br3对酮的选择性单溴化反应

在无溶剂和室温条件下, 三溴化1-丁基-3-甲基咪唑([Bmim]Br₃)选择性地与酮反应, 以90%～96%的产率生成相应的α-溴代酮. 该方法反应条件温和、产率高、选择性好、环境友好.     

1,10-邻菲咯啉-铜(Ⅱ)-L-蛋氨酸配合物的合成、表征及其分子结构

The complex [Cu(L-met)(phen)(H₂O)]NO₃·H₂O has been synthesized and investigated by elemental analysis, molar conductivity, spectroscopic and X-ray diffraction methods, where phen=1,10-phenanthroline and L-met=L-methioninate group. The complex crystallized in the monoclinic space group P2₁ with a=12.053(2)?, b=6.886(1)?, c=13.385(3)?, β=113.59(3)°, V=1018.1(3)?³, Z=2,D_c=1.598g·cm^-3, μ=1.223mm^-1, F(000)=506, R₁=0.0306, and wR₂=0.0742. The copper(Ⅱ) atom is ligated in a distorted square-pyramidal geometry by two nitrogen atoms of one phen and the amino nitrogen atom , one carboxylate oxygen atom of L-met in the base plane, and an aqua at the apical position. A one-dimensional chain configuration formed by the hydrogen-bonding and weak Cu-O (the uncoordinated carboxyl oxygen atom) coordination interactions be-tween neighboring [Cu(L-met)(phen)(H₂O)]⁺ cations. CCDC: 183368.     

硫代乙酰胺体系电沉积法制备CdS纳米膜

The film of surface active agents spread out on the surface of the electrolyte of Thioacetamide and cadmium chloride. CdS nanofilm was deposited at the interface of surface active agents and electrolyt by the method of electrodeposition. The optimal conditions on which the nanofilm was prepared of the least crystals and uniform particles could be attained via analytical results of L₁₆(4⁵) orthogonal experiments. The optimal conditions: castor oil/hexadecanoll 0.06 mL·cm^-2，CdCl₂/CH₃CSNH₂ 4 mmol·L^-1, cell voltage 5 V, electrodeposition temperature 15 ℃. The effects on the grain size of temperature, surface-active agent, electrodyte concentration, cell voltage and pH become smaller in the series. If the temperature was high, the movement of molecules of surface-active agent and electrodyte would be faster, thus the preparation of the film would be difficult. The grain size of thinfilm varied with the surface-active agents, however, when the amount of surface-active agents reached a certain value, the grain size would remain unchanged. The higher the electrodyte concentration, the larger the grain size of nanofilm. The surface forms were changed at the same time. If the pH of the electrodyte was higher or lower, nanofilm could not be prepared successfully, thus the pH range should be is 3～6. SEM image of the nanofilm shows the occurance of dendrite. The sucessful preparation of nanofilm is closely related to the nature of surface activre agent due to the nanofilm growth mechanism.     

ZnCl_2溶液中微波辅助SnCl_4催化纤维素制备5-HMF

将纤维素溶解在ZnCl_2溶液中,以SnCl_4为催化剂,微波下使纤维素降解成5-羟甲基糠醛(5-HMF)。实验考察了微波功率、纤维素的质量、ZnCl_2溶液浓度、反应时间及催化剂与纤维素物质的量比等对5-HMF产率的影响。结果表明,以SnCl_4为催化剂,在优化条件:1.0 g纤维素溶解在100 m L 70%ZnCl_2溶液中,微波功率为420 W,降解反应9 min,SnCl_4与纤维素物质的量比2∶1下,5-HMF的产率达到39.4%。