An efficient one-pot method for the synthesis of novel ferrocene-triamide conjugates via pseudo five-component reaction

A simple and efficient one-pot synthesis of novel ferrocene-triamide conjugates from the reaction of ferrocenecarboxaldehyde with Meldrum’s acid and isocyanides in the presence of NH-containing compounds is described. This transformation proceeds through the creation of two CC bonds, two CN bonds, and one CO bond, leading to three peptide bonds, and presumably occurs via a domino sequence involving Knoevenagel condensation, [1+4] cycloaddition, deacetonation, and aminolysis reactions.     

A study on sol–gel synthesis and characterization of SiC nano powder

Nano sized β-SiC particles were synthesized from sol–gel process. Mono dispersed β-SiC nano particles with semi spherical morphology were obtained by employing APC as a dispersant agent and adjusting pH in the range of 2.5–4. Phenolic resin and TEOS were employed as precursors and heat treatment was conducted up to 1500 °C. Different techniques such as XRD, DTA, FTIR, PSA, SEM and TEM were used to characterize the formation of β-SiC. The (Si–O-C) bonds were formed by hydrolysis and condensation reactions in the gel while the nucleation of crystalline β-SiC was found to be initiated at 1400 °C. The primary particles in the sol were found to be (< 10 nm) while the size distribution in the final product was recorded in the range of 30–50 nm.     

Relative permittivity data of binary mixtures containing 2-butanol, 2-butanone,and cyclohexane

Relative permittivity measurements were made on binary mixtures of (2-butanol + 2-butanone) and (2-butanol or 2-butanone + cyclohexane) for various concentrations at T = (298.2, 308.2, and 318.2) K. Some experimental results are compared with those obtained from theoretical calculations and interpreted in terms of homo- and heterogeneous interactions and structural effects. The molecular dipole moments were determined using Guggenheim–Debye method within the temperature range of (298.2 to 318.2) K. The variations of effective dipole moment and correlation factor, g, with the mole fraction in these materials were investigated using Kirkwood–Frohlich equation. The pure compounds showed a negative and small temperature coefficient of effective dipole moment. In order to obtain valuable information about heterogeneous interaction (interactions between the unlike molecules), the Kirkwood correlation factor, the Bruggeman dielectric factor and the excess permittivity were calculated. In order to predict the permittivity data of polar–apolar binary mixtures, five mixing rules were applied.     

Facile and green synthesis of triarylmethanes using silica sulfuric acid as a reusable catalyst under solvent-free conditions

A facile and environmentally-benign protocol has been developed for the synthesis of triarylmethanes (TAMs) from the reaction of different arenes and aldehydes in the presence of silica sulfuric acid (SSA) as a heterogeneous and reusable catalyst under solvent-free conditions. Easy work-up, short reaction times, high yields, high selectivity, mild and green conditions are other salient features of this method.     

[C6(MIm)2]2W10O32. 2H2O: A novel and powerful catalyst for the synthesis of 4-arylidene-2-phenyl-5(4)-oxazolones under ultrasonic condition

Di[1,6-bis(3-methylimidazolium-1-yl)hexane] decatungstate dihydrate ([C₆(MIm)₂]₂W₁₀O₃₂. 2H₂O) as a new family of polyoxometalate-based dicationic ionic liquids (POM-DIL) is synthesized and employed as a novel and powerful heterogeneous catalyst in the synthesis of 4-arylidene-2-phenyl-5(4)-oxazolones (azlactones) under ultrasound-assisted solvent-free condition. On the basis of the results, the products were obtained in excellent yields under mild condition. Utilization of easy work-up and purification make it very interesting from an economic perspective. Moreover, a recycling study confirmed that the catalyst can be reused multiple times without significant loss of its activity.     

A new solid phase micro extraction for simultaneous head space extraction of ultra traces of polar and non-polar compounds

The results of the innovative study on a new stationary phase with high efficiency based on ZnO nano and micro rod coating on fused silica are reported in this paper. ZnO nanorods with a diameter in the range of 70–300 nm and the length of about 500 nm, have been grown on fused silica fibers using a hydrothermal process. The extraction properties of the fiber were investigated using headspace solid-phase microextraction (HS-SPME) mode coupled with gas chromatography–mass spectrometry detection (GC–MS) for 1,4-dichloro-nitrobenzene, biphenyl and acenaphthene. The calibration curves were linear up to 10²–10⁷ ng L⁻¹ (R² > 0.995) with detection limits of 10⁻³ ng L⁻¹ for biphenyl and acenaphthene and 10 ng L⁻¹ for 1,4-dichloro-nitrobenzene. The RSD for single fiber and fiber-to-fiber were less than 7.0 and 11.5%, respectively. The high stability of the ZnO coating is proved at relatively high temperatures (up to 300 °C) with a high extraction capacity and long lifespan (more than 100 times). Promising recoveries (91–102%) were obtained in environmental water samples analysis by applying the proposed technique.     

A Hexagonally Ordered Nanoporous Silica-Based Fiber Coating for SPME of Polycyclic Aromatic Hydrocarbons from Water Followed by GC–MS

A highly porous fiber coating material was prepared and functionalized with 3-amino propyl triethoxysilane (APTES) on hexagonally ordered nanoporous silica (SBA-15). Applicability of this coating was assessed employing a laboratory made solid-phase microextraction (SPME) device and gas chromatography–mass spectrometry for the simultaneous sampling and determination of trace polycyclic aromatic hydrocarbons (PAHs) from aqueous sample solutions. A one at the time optimization strategy was applied to investigate and optimize important extraction parameters such as extraction temperature, extraction time, ionic strength and sonication time. In the optimum conditions, the relative standard deviations for deionized water, spiked with selected PAHs were between 3.3 and 7.7% (n = 3), and detection limits for the studied compounds were 4.2 and 26.1 pg mL⁻¹. No significant change was observed in the extraction efficiency of the new SPME fiber, over 50 extractions. The proposed method was successfully applied to the extraction and determination of PAHs in the waste water samples.

     

Tin(II) Halide Insertion or Halogen Exchange in the Reactions of Dihaloplatinum(II) Complexes with Tin(II) Halide

Reactions of SnCl₂ with the complexes cis‐[PtCl₂(P₂)] (P₂=dppf (1,1′‐bis(diphenylphosphino)ferrocene), dppp (1,3‐bis(diphenylphosphino)propane=1,1′‐(propane‐1,3‐diyl)bis[1,1‐diphenylphosphine]), dppb (1,4‐bis(diphenylphosphino)butane=1,1′‐(butane‐1,4‐diyl)bis[1,1‐diphenylphosphine]), and dpppe (1,5‐bis(diphenylphosphino)pentane=1,1′‐(pentane‐1,5‐diyl)bis[1,1‐diphenylphosphine])) resulted in the insertion of SnCl₂ into the Pt? Cl bond to afford the cis‐[PtCl(SnCl₃)(P₂)] complexes. However, the reaction of the complexes cis‐[PtCl₂(P₂)] (P₂=dppf, dppm (bis(diphenylphosphino)methane=1,1′‐methylenebis[1,1‐diphenylphosphine]), dppe (1,2‐bis(diphenylphosphino)ethane=1,1′‐(ethane‐1,2‐diyl)bis[1,1‐diphenylphosphine]), dppp, dppb, and dpppe; P=Ph₃P and (MeO)₃P) with SnX₂ (X=Br or I) resulted in the halogen exchange to yield the complexes [PtX₂(P₂)]. In contrast, treatment of cis‐[PtBr₂(dppm)] with SnBr₂ resulted in the insertion of SnBr₂ into the Pt? Br bond to form cis‐[Pt(SnBr₃)₂(dppm)], and this product was in equilibrium with the starting complex cis‐[PtBr₂(dppm)]. Moreover, the reaction of cis‐[PtCl₂(dppb)] with a mixture SnCl₂/SnI₂ in a 2 : 1 mol ratio resulted in the formation of cis‐[PtI₂(dppb)] as a consequence of the selective halogen‐exchange reaction. ³¹P‐NMR Data for all complexes are reported, and a correlation between the chemical shifts and the coupling constants was established for mono‐ and bis(trichlorostannyl)platinum complexes. The effect of the alkane chain length of the ligand and Sn^II halide is described.     

Application of the UNIFAC model for prediction of surface tension and thickness of the surface layer in the binary mixtures

The specific sorption of Eu(III) and Y(III) on γ-alumina was investigated with solid-state (1)H NMR. Solution pH was shown to influence the recorded (1)H NMR spectra of γ-alumina, and thus, metal ion-containing samples were prepared under constant pH conditions, 8.00±0.05. The metal ion concentration in the samples was varied between 6.58×10(-7) M - 3.95×10(-4) M in case of Y(3+) and 6.58×10(-8) M - 1.32×10(-4) M in case of Eu(3+). The mineral concentration was kept constant at 4 g/l. After separation of the liquid phase, the samples were dried under vacuum to remove physisorbed water from the mineral surface. However, even after 48 h of drying at 150°C and 20 mTorr, water was still detected in the proton spectra as two distinct peaks with chemical shifts at 1.3 and 0.9 ppm. The europium addition to the γ-alumina samples induced significant spectral changes in comparison with yttrium-containing samples. These changes were attributed to the paramagnetism of europium rather than to complexation reactions occurring on the mineral surface. Proton spectra obtained for yttrium samples were therefore used to detect the spectral changes induced by the sorption reaction itself. The results revealed a large distribution of protons being removed from the mineral surface upon yttrium complexation. Removed protons were assigned to both bridging surface hydroxyls such as (Al(VI))(2)-OH as well as to terminal hydroxyls, e.g., of type Al(VI)-OH. Acidic protons belonging to (Al(VI))(3)-OH groups were not observed to participate in the surface reaction.     

A green and selective synthesis of 2‐aryloxazines and 2‐aryltetrahydropyrimidines

An efficient method for the selective synthesis of 2‐substituted oxazines and tetrahydropyrimidines by the reaction of arylnitriles with 3‐amino‐1‐propanol and 1,3‐diaminopropane in the presence of montmorillonite K‐10 and KSF as inexpensive, environmentally benign, and reusable catalysts under classical heating conditions and microwave irradiation is reported. J. Heterocyclic Chem., (2011).