Separation of amino alcohols using divalent dipeptides as counter ions in aqueous CE

Divalent dipeptides have been introduced as counter ions in aqueous CZE. The dipeptides form ion pairs with amino alcohols in the BGE and facilitate the separation of amino alcohols. High concentrations of dipeptide caused reversed effective mobility for the analytes. The net charge of the dipeptide can be controlled using a buffer or a strong base, and regulates the interaction between the dipeptide and the amino alcohol. A stronger interaction and higher selectivity of amino alcohols was observed when the dipeptides were used as divalent counter ions, than in monovalent or uncharged form. Association constants for ion pairs between divalent dipeptides and amino alcohols can be used to enhance selectivity for amino alcohols in CZE. No chiral separation of amino alcohols was observed when using the dipeptides as ion‐pairing chiral selectors in aqueous BGE, but addition of methanol to the BGE promoted enantioselectivity.     

Oxidation of Pt(111) under near-ambient conditions

The oxidation of Pt(111) at near-ambient O2 pressures has been followed in situ using x-ray photoelectron spectroscopy (XPS) and ex situ using x-ray absorption spectroscopy (XAS). Polarization-dependent XAS signatures at the O K edge reveal significant temperature- and pressure-dependent changes of the Pt-O interaction. Oxide growth commences via a PtO-like surface oxide that coexists with chemisorbed oxygen, while an ultrathin α-PtO2 trilayer is identified as the precursor to bulk oxidation. These results have important implications for understanding the chemical state of Pt in catalysis.     

Elemental composition of fine particulate matter (PM2.5) in Skopje,FYR of Macedonia

Aerosol samples were collected at an urban background site in Skopje, Former Yugoslavic Republic of Macedonia, during four measurement campaigns from December 2006 to October 2007. An impactor was used to collect particulate matter (PM_2.5) aerosol particles and the samples were analyzed for the concentrations of particulate mass, black carbon (BC), and 17 elements. The 12‐h average PM_2.5 concentrations varied in the range 10–140 µg m^?3 with the highest concentrations measured during wintertime pollution episodes and during the summer period. Pair‐wise correlations and crustal enrichment were studied and the data set was analyzed by factor analysis and positive matrix factorization. Major aerosol components were identified as mineral dust (main observed tracers Si, K, Ca, Ti, Fe, Sr, and Rb), combustion (BC, S, K, V, and Ni), traffic‐related aerosol (Pb and Zn), and secondary sulfate combined with mineral dust. Combustion sources dominated during wintertime and were likely due to heavy oil combustion, biomass burning, and other industrial activities within the city area. Mineral dust was observed throughout the year, but the concentrations peaked during the unusually hot and dry summer of 2007. It is concluded that Skopje suffers from serious air pollution due to central and residential heating, the transport sector, and industrial activities within the city, and contributions from mineral dust increase the PM_2.5 concentrations under dry periods. Topography and meteorological conditions aggravate the problems and make the air quality comparable with the conditions in other highly polluted cities in Southern Europe and worldwide. Copyright © 2011 John Wiley & Sons, Ltd.     

A Note on Toeplitz’ Conjecture

In 1911, Toeplitz made a conjecture asserting that every Jordan curve in $\mathbb{R}^{2}$ contains four points forming the corners of a square. Here Conjecture C is presented, which states that the side length of the largest square on a closed curve that consists of edges of an n×n grid is at least $1/\sqrt{2}$ times the side length of the largest axis-aligned square contained inside the curve. Conjecture C implies Toeplitz’ conjecture and is verified computationally for n≤13.     

Zur Bestimmung des specifischen Gewichtes von D?mpfen und permanenten Gasen

Ohne Zusammenfassung     

Multicomponent polyanions. 45. A multinuclear NMR study of vanadate(V)-oxalate complexes in aqueous solution.

The two complexes formed in the aqueous vanadooxalate system, V(Ox)- and V(Ox)2(3-), have been characterized using 51V, 13C and 17O NMR. For the V(Ox)2(3-) complex, two peaks are observed in 13C NMR and four in 17O NMR. This leads to the conclusion that each oxalate ligand has two different distances to the VO2 group. This fact, together with the peak integrals and the chemical shifts, indicates strongly that the hexacoordinate complex [VO2(C2O4)2]3- found in single-crystal X-ray structure determinations persists in aqueous solution. The dependence of the 13C NMR linewidths upon temperature reveals two types of dynamic processes: (1) a rearrangement in which the two different V-Oox switch places and (2) an exchange of the oxalate ligands in the [VO2(C2O4)2]3- complex with free oxalate, probably through a dissociative process. Rate constants and activation parameters for the two dynamic processes involving [VO2(C2O4)2]3- have been calculated from the shape of the 13C NMR signals. For the V(Ox)- complex, only one relatively narrow peak is obtained in 13C NMR and three peaks in 17O. This fact, as well as the relative positions of these peaks, is in accordance with a pentacoordinate complex [VO2(C2O4)H2O]-, where the two V-O distances to the oxalate ligand are equal. We also show that, in the pH range 0.8-6.6, there is no protonation of the studied complexes, in agreement with previous potentiometric results.     

Measurement of the flexibility of wet cellulose fibres using atomic force microscopy

Flexibility and modulus of elasticity data for two types of wet cellulose fibres using a direct force–displacement method by means of AFM are reported for never dried wet fibres immersed in water. The flexibilities for the bleached softwood kraft pulp (BSW) fibres are in the range of 4–38 × 10¹² N^?1 m^?2 while the flexibilities for the thermomechanical pulp (TMP) fibres are about one order of magnitude lower. For BSW the modulus of elasticity ranges from 1 to 12 MPa and for TMP between 15–190 MPa. These data are lower than most other available pulp fibre data and comparable to a soft rubber band. Reasons for the difference can be that our measurements with a direct method were performed using never dried fibres immersed in water while other groups have employed indirect methods using pulp with different treatments.     

Combined forced and natural convection in laminar film flow

A mathematical model for the flow and heat transfer in a gravity-driven liquid film is presented, in which the strict Boussinesq approximation is adopted to account for buoyancy. A similarity transformation reduces the governing equations to a coupled set of ordinary differential equations. The resulting two-parameter problem is solved numerically for Prandtl numbers ranging from 1 to 1000. Favourable buoyancy arises when the temperatureT _w of the isothermal surface is lower than the temperatureT ₀ of the incoming fluid, and the principal effects of the aiding buoyancy are to increase the wall shear and heat transfer rate. For unfavourable buoyancy (T _w>T ₀), the buoyancy force and gravity act in opposite directions and the flow in the film boundary layer decelerates, whereas the friction and heat transfer are reduced. The observed effects of buoyancy diminish appreciably for higher Prandtl numbers.     

A certified reference material for radionuclides in the water sample from Irish Sea (IAEA-443)

A new certified reference material (CRM) for radionuclides in sea water from the Irish sea (IAEA-443) is described and the results of the certification process are presented. Ten radionuclides (³H, ⁴⁰K, ⁹⁰Sr, ¹³⁷Cs, ²³⁴U, ²³⁵U, ²³⁸U, ²³⁸Pu, ^239+240Pu and ²⁴¹Am) have been certified, and information values on massic activities with 95% confidence intervals are given for four radionuclides (²³⁰Th, ²³²Th, ²³⁹Pu and ²⁴⁰Pu). Results for less frequently reported radionuclides (⁹⁹Tc, ²²⁸Th, ²³⁷Np and ²⁴¹Pu) are also reported. The CRM can be used for quality assurance/quality control of the analysis of radionuclides in water samples, for the development and validation of analytical methods and for training purposes. The material is available in 5 L units from IAEA (http://nucleus.iaea.org/rpst/index.htm).     

New method for resolving the enantiomeric composition of 2-methyltetrols in atmospheric organic aerosols

In order to facilitate the determination of the primary and secondary origin of atmospheric organic aerosols, a novel method involving chiral capillary gas chromatography coupled with mass spectrometry has been developed and validated. The method was focused on the analysis of 2-methylerythritol and 2-methylthreitol, considered to be tracers of secondary organic aerosols from the oxidation of atmospheric isoprene. The method was validated by performing various tests using authentic standards, including pure enantiomeric standards. The result showed that the analytical method itself does not affect the enantiomeric composition of the samples analyzed. The method was applied on atmospheric aerosols from a boreal forest collected in Aspvreten, Sweden and on laboratory samples obtained from liquid phase oxidation of isoprene and smog chamber experiments. Aerosol samples contained one enantiomer of 2-methylerythritol in significantly larger quantities than the others. In contrast, the liquid-phase oxidation of isoprene and its gas-phase oxidation in the smog chamber produced all enantiomers in equal quantities. The results obtained where the enantiomer fraction, EF, is larger than 0.50 suggest that 2-methyltetrols in atmospheric aerosols may also have biological origin. Information about the differences between enantiomer fractions obtained using this method brings new insights in the area of atmospheric aerosols.