Revision of iron(III)–citrate speciation in aqueous solution. Voltammetric and spectrophotometric studies

A detailed study of iron (III)–citrate speciation in aqueous solution (θ = 25 °C, I_c = 0.7 mol L⁻¹) was carried out by voltammetric and UV–vis spectrophotometric measurements and the obtained data were used for reconciled characterization of iron (III)–citrate complexes. Four different redox processes were registered in the voltammograms: at 0.1 V (pH = 5.5) which corresponded to the reduction of iron(III)–monocitrate species (Fe:cit = 1:1), at about −0.1 V (pH = 5.5) that was related to the reduction of FeL₂⁵⁻, FeL₂H⁴⁻ and FeL₂H₂³⁻ complexes, at −0.28 V (pH = 5.5) which corresponded to the reduction of polynuclear iron(III)–citrate complex(es), and at −0.4 V (pH = 7.5) which was probably a consequence of Fe(cit)₂(OH)_x species reduction. Reversible redox process at −0.1 V allowed for the determination of iron(III)–citrate species and their stability constants by analyzing E_p vs. pH and E_p vs. [L⁴⁻] dependence. The UV–vis spectra recorded at varied pH revealed four different spectrally active species: FeLH (log β = 25.69), FeL₂H₂³⁻ (log β = 48.06), FeL₂H⁴⁻ (log β = 44.60), and FeL₂⁵⁻ (log β = 38.85). The stability constants obtained by spectrophotometry were in agreement with those determined electrochemically. The UV–vis spectra recorded at various citrate concentrations (pH = 2.0) supported the results of spectrophotometric–potentiometric titration.     

Macroporous silicon chips for laterally resolved, multi-parametric analysis of epithelial barrier function

This study describes a novel assay to visualize the macromolecular permeability of epithelial and endothelial cell layers with subcellular lateral resolution. Defects within the cell layer and details about the permeation route of the migrating solute are revealed. The assay is based on silicon chips with densely packed, highly ordered, dead-ended pores of μm-diameters on one side. The cells under study are grown on the porous side of the chip such that the pores in the growth surface serve as an array of femtolitre-sized cuvettes in which the permeating probe accumulates at the site of permeation. The pattern of pore filling reveals the permeability characteristics of the cell layer with a lateral resolution in the μm range. Coating of the chip surface with a thin layer of gold allows for impedance analysis of the adherent cells in order to measure their tightness for inorganic ions at the same time. The new assay provides an unprecedented look on epithelial and endothelial barrier function.     

A microchamber array for single cell isolation and analysis of intracellular biomolecules

We present a microfluidic device that enables the determination of intracellular biomolecules in multiple single cells. The cells are individually trapped and isolated in a microchamber array. Since the microchambers can be opened and closed reversibly, the cells can be exposed to different solutions sequentially, e.g. for incubation, washing steps, labelling and finally, for lysis. The tightly sealed microchambers enable the retention and analysis of cell lysate derived from single cells. The performance of the device is demonstrated by monitoring the levels of the cofactors NADPH and NADH both in healthy mammalian cells and in cells exposed to oxidative stress. The platform was also used to determine the toxic impact of the alkaloid camptothecin on the intracellular enzyme glucose-6-phosphate dehydrogenase levels. In general, the device is applicable for the analysis of cell auto-stimulation and the detection of intracellular metabolite concentration or expression levels of proteins.     

Solid-phase-assisted synthesis of targeting peptide-PEG-oligo(ethane amino)amides for receptor-mediated gene delivery

In the forthcoming era of cancer gene therapy, efforts will be devoted to the development of new efficient and non-toxic gene delivery vectors. In this regard, the use of Fmoc/Boc-protected oligo(ethane amino)acids as building blocks for solid-phase-supported assembly represents a novel promising approach towards fully controlled syntheses of effective gene vectors. Here we report on the synthesis of defined polymers containing the following: (i) a plasmid DNA (pDNA) binding domain of eight succinoyl-tetraethylenpentamine (Stp) units and two terminal cysteine residues; (ii) a central polyethylene glycol (PEG) chain (with twenty-four oxyethylene units) for shielding; and (iii) specific peptides for targeting towards cancer cells. Peptides B6 and c(RGDfK), which bind transferrin receptor and α(v)β(3) integrin, respectively, were chosen because of the high expression of these receptors in many tumoral cells. This study shows the feasibility of designing these kinds of fully controlled vectors and their success for targeted pDNA-based gene transfer.     

A new strategy for the development of monoclonal antibodies for the determination of human procalcitonin in serum samples

Procalcitonin (PCT)—a diagnostic serum parameter for bacterial infection and sepsis—is of great interest in the field of biosensors for point-of-care testing. Its detection needs specific biological recognition elements, such as antibodies. Herein, we describe the development and characterization of rat monoclonal antibodies (mAbs) for PCT, and their application in enzyme-linked immunosorbent assays (ELISAs) for the determination of PCT in patient serum samples. From about 50 mAbs, two mAbs, CALCA 2F3 and CALCA 4A6, were selected as a pair with high affinity for PCT in sandwich immunoassays. Both mAbs could be used either as capture or as detection mAb. They were Protein G-purified and biotinylated when used as detection mAb. The setup of two sandwich ELISAs with standards of human recombinant (hr) PCT, using either CALCA 2F3 (assay A) or CALCA 4A6 (assay B) as capture mAbs and the biotinylated mAbs CALCA 4A6 or CALCA 2F3, respectively, as detection mAbs, led to highly specific determinations of PCT without cross-reactivity to calcitonin and katacalcin. Test midpoints (IC₅₀) of both assays were determined for hrPCT standards in 4% (w/v) human serum albumin and found with 2.5 (assay A) and 2.7 μg L⁻¹ (assay B). With both sandwich ELISAs a collection of eight patient serum samples have been determined in comparison to the determination by the Elecsys BRAHMS PCT assay. Good correlations between our prototype ELISAs and the BRAHMS assay could be demonstrated (R ²: assay A, 0.996 and assay B, 0.990). The use of these newly developed anti-PCT mAbs should find broad applications in immunosensors for point-of-care diagnostics of sepsis and systemic inflammation processes.     

Fluorescence dye as novel label molecule for quantitative SERS investigations of an antibiotic

Within this contribution, the proof-of-principle for a new concept for indirect surface-enhanced Raman spectroscopy (SERS) detection is presented. The fluorescence dye FR-530 is applied as a label molecule for the antibiotic erythromycin. The antibiotic binds directly to the label molecule. Changes within the SERS spectrum of the fluorescence dye appearing with the presence of the antibiotic are utilized for the detection and quantitative investigations of erythromycin. With the new concept of binding the label molecule directly to the analyte molecule, the application of linkage compounds like antibodies or any other recognition molecules becomes dispensable.     

Comparison of tunneling times in isotropic and anisotropic media

We present a comparative analysis of the tunneling times of electromagnetic (EM) waves propagating in isotropic and anisotropic media. First, suitable expressions for the tunneling times in a layered periodic material, with anisotropic properties originating from its structure, are derived, followed by numerical calculations performed for a new type of anisotropic semiconductor metamaterial. In the first case, we have considered a layered structure which contains two differently doped In_0.53Ga_0.47As semiconductor layers. The second structure under investigation is made of alternately placed layers of doped In_0.53Ga_0.47As and undoped Al_0.48Ga_0.52As. The investigation of the dwell time as a function of incident wave frequency has revealed the existence of two peaks, one of which may be interpreted as a consequence of anisotropy, while the other one corresponds to the peak related to the absorption and the group delay. Both of these two peaks are affected by variations of layers?? doping densities. Furthermore, at increased incident angles of incoming EM waves, the dwell time peak occurs at the upper boundary of the frequency interval, for which the structure exhibits negative refractive index.     

Thermal analysis of doped Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>

New environmentally inorganic pigments based on Bi₂O₃ doped by metal ions, such as Zr⁴⁺ and Dy³⁺ have been developed and characterized using the methods thermal analysis, X-ray powder diffraction, and spectral reflectance data. The compounds having formula Bi_2−x Dy _x/2Zr_3x/8O₃ (x = 0.2, 0.6, 1.0, and 1.2) were prepared by the solid state reaction. Methods of thermal analysis were used for determination of the temperature region of the pigment formation and thermal stability of compounds. The incorporation of doped ions in Bi₂O₃ changes the color from yellow to orange and also contributes to a growth of their thermal stability. This property gives a direction for coloring ceramic glazes.     

Hydration of humic and fulvic acids studied by DSC

Qualitative and quantitative aspects of hydration of four humic acids (HA) and three fulvic acids (FA) originating from different sources were investigated. DSC experiments at subambient temperatures were carried out in order to monitor differences in ice behavior originating from freezable water surrounding humic molecules. It was found that kinetic effects play a significant role in hydration processes of both HA and FA. In fact, the hydration took part over 21?days which was detected as a progressive decrease in ice melting enthalpy. Simultaneously, the peak shapes and positions changed indicating structural changes in the physical structure of the humic substances. In case of FA, the dependency of melting enthalpy on water concentration showed a linear trend resembling a complete hydration previously observed for water-soluble hydrophilic polymers. In contrast, the melting enthalpy of some HA increased in a step-like way with increasing water content, suggesting preservation of original hydrophobic scaffold during the hydration. The differences between the rather young FA and the rather old HA lead to the conclusion that water can play a significant role in processes of humification. We assume that separation of hydrophobic and hydrophilic domains and thus increase in nanoscale heterogeneity represents an important physical contribution to the overall humification process. It was also demonstrated that the higher content of oxygen in humic molecules is not the only indicator of higher water holding capacity. Instead the porosity of humic matrix seems to contribute as additional parameter into these processes.