Thermal study of the Ce<Subscript>0.9</Subscript>Tb<Subscript>0.1</Subscript>O<Subscript>2</Subscript> pigment prepared by different synthesis

The inorganic ceramic compounds based on the CeO₂ belong into the group of high-temperature pigments. The pigments have been prepared by the classical dry process (i.e. solid-state reaction) in the temperature range from 1,300 to 1,600 °C and by the coprecipitation at the three different temperatures: 400, 600 and 1,100 °C. The principal of these pigments makes the host lattice of the CeO₂, which is doped by terbium ions. This incorporation of the doped ions leads to obtaining of the interesting dark orange colour after application into ceramic glaze. The aim of our research was to improve and optimize the synthesis conditions of these pigments. The samples were submitted to thermal analysis (TG–DTA) for determination of the temperature interval of the pigment formation and the thermal stability of pigments. The compounds were also measured from the point of view of their colouring, structure and particle size distribution.     

Granulation of activated sludge in a laboratory upflow sludge blanket reactor

The creation of anoxic granulated biomass has been monitored in a laboratory USB (Upflow Sludge Blanket) reactor with the volume of 3.6 L. The objective of this research was to verify the possibilities of post-denitrification of residual NO₃-N concentrations in treated wastewater (denitrification of 10-20 mg L⁻¹ NO₃-N) and to determine the maximum hydraulic and mass loading of the granulated biomass reactor. G-phase from biodiesel production and methanol were both tested as external organic denitrification substrates. The ratio of the organic substrate COD to NO₃-N was 6. Only methanol was proven as a suitable organic substrate for this kind of reactor. However, the biomass adaptation to the substrate took over a week. The cultivation of anoxic granulated biomass was reached at hydraulic loading of over 0.35 m h⁻¹. The size of granules was smaller when compared with results found and described in literary reports (granules up to 1 mm); however, settling properties were excellent and denitrification was deemed suitable for the USB reactor. Sludge volume indexes of granules ranged from 35-50 mL g⁻¹ and settling rates reached 11 m h⁻¹. Maximum hydraulic and mass loadings in the USB reactor were 0.95 m3 m⁻² h⁻¹ and 6.6 kg m⁻³ d⁻¹. At higher loading levels, a wash-out of the biomass occurred. Presented at the 35th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 26–30 May 2008.     

Control of EOF in CE by different ways of application of radial electric field

Various ways of application of radial electric field for the control of electrokinetic potential and EOF in a home-made device for CE are presented. The device comprises three high-voltage power supplies, which are used to form a radial electric field across the fused-silica capillary wall. One power supply provides the internal electric field - a driving force for electrophoretic migration of charged analytes and for the EOF. Two power supplies are connected to the ends of the outer low-conductivity polymeric coating, which is formed by the dispersion of insoluble conductive copolymer of aniline and p-phenylendiamine in polystyrene matrix (dissolved in N-methylpyrrolidone) attached to the original outer polyimide coating of the capillary. They are able to constitute the external longitudinal electric field with variable values of electric potential at both ends of the outer coating. The potential gradient between the external and internal electric field is perpendicular to the capillary wall and forms a radial electric field across the capillary wall, which affects the electrokinetic potential at the solid-liquid interface and EOF inside the capillary. The developed device and methodology has been applied for the analysis of both chiral and achiral molecules such as terbutaline enantiomers and oligopeptides (diglycine and triglycine). The effect of magnitude, orientation, and different ways of application of the radial electric field on the flow rate of the EOF and on the speed, efficiency, and resolution of CZE separations of the above analytes in the internally noncoated fused-silica capillaries have been evaluated.     

Secretory phospholipase A2 hydrolysis of phospholipid analogues is dependent on water accessibility to the active site

A new and unnatural type of phospholipids with the head group attached to the 2-position of the glycerol backbone has been synthesized and shown to be a good substrate for secretory phospholipase A2 (sPLA2). To investigate the unexpected sPLA2 activity, we have compared three different phospholipids by using fluorescence techniques and HPLC, namely: (R)-1,2-dipalmitoyl-glycero-3-phosphocholine (hereafter referred to as 1R), (R)-1-O-hexadecyl-2-palmitoyl-glycero-3-phoshocholine (2R), and (S)-1-O-hexadecyl-3-palmitoyl-glycero-2-phosphocholine (3S). Furthermore, to understand the underlying mechanisms for the observed differences, we have performed molecular dynamics simulations to clarify on a structural level the substrate specificity of sPLA2 toward phospholipid analogues with their head groups in the 2-position of the glycerol backbone. We have studied the lipids above 1R, 2R, and 3S as well as their enantiomers 1S, 2S, and 3R. In the simulations of sPLA2-1S and sPLA2-3R, structural distortion in the binding cleft induced by the phospholipids showed that these are not substrates for sPLA2. In the case of the phospholipids 1R, 2R, and 3S, our simulations revealed that the difference observed experimentally in sPLA2 activity might be caused by reduced access of water molecules to the active site. We have monitored the number of water molecules that enter the active site region for the different sPLA2-phospholipid complexes and found that the probability of a water molecule reaching the correct position such that hydrolysis can occur is reduced for the unnatural lipids. The relative water count follows 1R > 2R > 3S. This is in good agreement with experimental data that indicate the same trend for sPLA2 activity: 1R > 2R > 3S.     

Metadynamics in essential coordinates: free energy simulation of conformational changes

We propose an approach that combines an extraction of collective motions of a molecular system with a sampling of its free energy surface. A recently introduced method of metadynamics allows exploration of the free energy surface of a molecular system by means of coarse-grained dynamics with flooding of free energy minima. This free energy surface is defined as a function of a set of collective variables (e.g., interatomic distances, angles, torsions, and others). In this study, essential coordinates determined by essential dynamics (principle component analysis) were used as collective variables in metadynamics. First, dynamics of the model system (explicitly solvated alanine dipeptide, Ace-Ala-Nme) was simulated by a classical molecular dynamics simulation. The trajectory (1 ns) was then analyzed by essential dynamics to obtain essential coordinates. The free energy surface as a function of the first and second essential coordinates was then explored by metadynamics. The resulting free energy surface is in agreement with other studies of this system. We propose that a combination of these two methods (metadynamics and essential dynamics) has great potential in studies of conformational changes in peptides and proteins.     

Short monolithic columns--a breakthrough in purification and fast quantification of tomato mosaic virus

Drawbacks of conventional virus purification methods have led to the development of new, mostly chromatography-based methods. Short monolithic columns are stationary phases intended for purification of large molecules. In this work efficient chromatographic purification of tomato mosaic virus (ToMV) from plant material is described. Based on short monolithic column, the purification process was shortened from 5 days to 2 hours. High viral purity was achieved and recovery of chromatographic step was up to 90%. In addition, these columns enabled preliminary quantification of the virus in just a few minutes, much faster than other quantification methods (e.g. enzyme-linked immunosorbent assay or real-time polymerase chain reaction) which take 1-2 days. These results demonstrate the potential of short monolith column technology for purification and analysis of different viruses.     

In-situ investigation of the adsorption of globular model proteins on stimuli-responsive binary polyelectrolyte brushes

Binary brushes constituted from two incompatible polymers can be used in the form of ultrathin polymeric layers as a versatile tool for surface engineering to tune physicochemical surface characteristics such as wettability, surface charge, chemical composition, and morphology and furthermore to create responsive surface properties. Mixed brushes of oppositely charged weak polyelectrolytes represent a special case of responding surfaces that are sensitive to changes in the pH value of the aqueous environment and therefore represent interesting tools for biosurface engineering. The polyelectrolyte brushes used for this study were composed of two oppositely charged polyelelctrolytes poly(2-vinylpyridine) (P2VP) and poly(acrylic acid) (PAA). The in-situ properties and surface characteristics such as as surface charge, surface tension, and extent of swelling of these brush layers are functions of the pH value of the surrounding aqueous solution. To test the behavior of the mixed polylelctrolyte brushes in contact with biosystems, protein adsorption experiments with globular model proteins were performed at different pH values and salt concentrations (confinement of counterions) of the buffer solutions. The influence of the pH value, buffer salt concentration, and isoelectric points (IEP) of the brush and protein on the adsorbed amount and the interfacial tension during protein adsorption as well as the protein adsorption mechanism postulated in reference to recently developed theories of protein adsorption on polyelectrolyte brushes is discussed. In the salted regime, protein adsorption was found to be similar to the often-described adsorption at hydrophobic surfaces. However, in the osmotic regime the balance of electrostatic repulsion and a strong entropic driving force, "counterion release", was found to be the main influence on protein adsorption.     

Novel method for bulk resistance evaluation in conductivity measurement for high-purity water

A major issue with the electrolytic conductivity measurement for pure water is the lack of standard or reference methods. A primary method traceable to SI and suitable for pure-water conductivity measurement was developed at the Physikalisch-Technische Bundesanstalt (PTB), Germany, as the base for the calibration method for the conductivity measuring devices at the low conductivity level. This paper provides a novel method to calculate the bulk resistance of pure water using impedance measured at a single frequency, which is one of the key procedures for the primary methods.