Recrystallization of 223Ra with barium sulfate

In this work, the kinetics of barium sulfate recrystallization has been studied in acidic 0.01 mol dm^?3 sodium sulfate solution using ²²³Ra and ¹³³Ba tracers at very low total radium concentration, i.e. less than 10^?13 mol dm^?3. It was found that the system follows the homogeneous recrystallization model and that recrystallization rates, inferred by the decrease of ²²³Ra and ¹³³Ba in the aqueous solution, are fast. Therefore, even at very low concentrations, below the solubility limit, radium will be retained by barium sulfate—a mineral present in the deep underground repository.     

Method development and inter-laboratory comparison about the determination of titanium from titanium dioxide nanoparticles in tissues by inductively coupled plasma mass spectrometry

Nanosized titanium dioxide (TiO₂) is one of the most interesting and valuable nanomaterials for the construction industry but also in health care applications, food, and consumer goods, e.g., cosmetics. Therefore, the properties associated with this material are described in detail. Despite its widespread use, the analytical determination and characterization of nanosized metal oxides is not as straightforward as the comparatively easy-to-detect metallic nanoparticles (e.g., silver or gold). This study presents the method development and the results of the determination of tissue titanium (Ti) levels after treatment of rats with the nanosized TiO₂. Total Ti levels were chosen to evaluate the presence and distribution of TiO₂ nanoparticles. A procedure consisting of incubation with a mixture of nitric acid (HNO₃) and hydrofluoric acid (HF), and heating was developed to digest tissues and TiO₂ nanomaterials in order to determine the total Ti content by inductively coupled plasma mass spectrometry (ICPMS). For the inter-laboratory comparison, altogether four laboratories analyzed the same samples upon digestion using the available ICPMS equipment. A major premise for any toxicokinetic study is the possibility to detect the chemical under investigation in biological samples (tissues). So, the study has to be performed with a dose high enough to allow for subsequent tissue level measurement of the chemical under investigation. On the other hand, dose of the chemical applied should not induce over toxicity in the animal as this may affect its absorption, distribution, metabolism, and excretion. To determine a non-toxic TiO₂ dosage, an acute toxicity study in rats was performed, and the organs obtained were evaluated for the presence of Ti by ICPMS. Despite the differences in methodology and independent of the sample preparation and the ICPMS equipment used, the results obtained for samples with Ti concentrations >4 μg Ti/g tissue agreed well.

Combined QCM-D/GE as a tool to characterize stimuli-responsive swelling of and protein adsorption on polymer brushes grafted onto 3D-nanostructures

A combined setup of quartz crystal microbalance and generalized ellipsometry can be used to comprehensively investigate complex functional coatings comprising stimuli-responsive polymer brushes and 3D nanostructures in a dynamic, noninvasive in situ measurement. While the quartz crystal microbalance detects the overall change in areal mass, for instance, during a swelling or adsorption process, the generalized ellipsometry data can be evaluated in terms of a layered model to distinguish between processes occurring within the intercolumnar space or on top of the anisotropic nanocolumns. Silicon films with anisotropic nanocolumnar morphology were prepared by the glancing angle deposition technique and further functionalized by grafting of poly-(acrylic acid) or poly-(N- isopropylacrylamide) chains. Investigations of the thermoresponsive swelling of the poly-(N-isopropylacrylamide) brush on the Si nanocolumns proved the successful preparation of a stimuli-responsive coating. Furthermore, the potential of these novel coatings in the field of biotechnology was explored by investigation of the adsorption of the model protein bovine serum albumin. Adsorption, retention, and desorption triggered by a change in the pH value is observed using poly-(acrylic acid) functionalized nanostructures, although generalized ellipsometry data revealed that this process occurs only on top of the nanostructures. Poly-(N-isopropylacrylamide) is found to render the nanostructures non-fouling properties.     

Phenylene-Bridged Perylene Monoimides as Acceptors for Organic Solar Cells: A Study on the Structure–Property Relationship

A series of non-fullerene acceptors based on perylene monoimides coupled in the peri position through phenylene linkers were synthesized via Suzuki-coupling reactions. Various substitution patterns were investigated using density functional theory (DFT) calculations in combination with experimental data to elucidate the geometry and their optical and electrochemical properties. Further investigations of the bulk properties with grazing incidence wide angle X-ray scattering (GIWAXS) gave insight into the stacking behavior of the acceptor thin films. Electrochemical and morphological properties correlate with the photovoltaic performance of devices with the polymeric donor PBDB-T and a maximum efficiency of 3.17 % was reached. The study gives detailed information about structure–property relationships of perylene-linker-perylene compounds.     

Enantioselective high-performance liquid chromatography of aryl-substituted oxazolines as an efficient tool for determination of chiral purity of serine medicinal components

A new approach for the evaluation of chiral purity of serine esterification products bearing long-chain alkyl substituents was developed. The compounds were simply converted to aryl-substituted oxazolines which: (i) facilitates effective chromatographic enantioseparation and (ii) enables direct detection using ultraviolet absorption. The method employs a polysaccharide-based chiral stationary phase and allows enantioseparation of highly stable oxazoline products in less than 6 min using a simple binary mobile phase. As opposed to the previously used normal phase method the developed method was performed in the reversed-phase mode. Aside from the benefits of switching to less hazardous solvents with regard to the principles of Green Chemistry, this has also led to a reduction in the analysis time. In comparison with known serine chromophores, the best enantioseparation of aryloxazoline rigid structure may be achieved only based on non-polar interactions with the chiral stationary phase. In contrast, the substitution of the chromophore moiety with hydroxyl substituent affected intra and intermolecular interactions that caused enantioseparation differences. Concurrently, we found high chirality retention of (R)- and (S)-configuration oxazoline standards (≥99% enantiomeric excess) during the introduction of the ultraviolet label. The method is suitable for rapid injection of the mixture containing the ultraviolet absorption marker without prior purification.     

FeIII in a high-spin state in bis(5-bromosalicylaldehyde 4-ethylthiosemicarbazonato-κ3O,N1,S)ferrate(III) nitrate monohydrate,the first example of such a cationic FeIII complex unit

The synthesis and crystal structure (100 K) of the title compound, [Fe(C₁₀H₁₁BrN₃OS)₂]NO₃·H₂O, is reported. The asymmetric unit consists of an octahedral [Fe^III(HL)₂]⁺ cation, where HL^? is H-5-Br-thsa-Et or 5-bromosalicylaldehyde 4-ethylthiosemicarbazonate(1?) {systematic name: 4-bromo-2-[(4-ethylthiosemicarbazidoidene)methyl]phenolate}, a nitrate anion and a noncoordinated water molecule. Each HL^? ligand binds via the thione S, the imine N and the phenolate O atom, resulting in an Fe^IIIS₂N₂O₂ chromophore. The ligands are orientated in two perpendicular planes, with the O and S atoms in cis and the N atoms in trans positions. This [Fe(HL)₂](anion)·H₂O compound contains the first known cationic Fe^III entity containing two salicylaldehyde thiosemicarbazone derivatives. The Fe^III ion is in the high-spin state at 100 K. In addition, a comparative IR spectroscopic study of the free ligand and the ferric complex is presented, demonstrating that such an analysis provides a quick identification of the degree of deprotonation and the coordination mode of the ligand in this class of metal compounds. The variable-temperature magnetic susceptibility measurements (5–320 K) are consistent with the presence of a high-spin Fe^III ion with a zero-field splitting D = 0.439 (1) cm^?1.     

Controlling the early stages of pentacene growth by supersonic molecular beam deposition

The key role of the pentacene kinetic energy (Ek) in the early stages of growth on SiOx/Si is demonstrated: islands with smooth borders and increased coalescence differ remarkably from fractal-like thermal growth. Increasing Ek to 6.4 eV, the morphology evolves towards higher density of smaller islands. At higher coverage, coalescence grows with Ek up to a much more uniform, less defected monolayer. The growth, interpreted by the diffusion mediated model, shows the critical nucleus changing from 3 to 2 pentacene for Ek>5-6 eV. Optimal conditions to produce single crystalline films are envisaged.     

The anxiolytic effects of midazolam during anticipation to pain revealed using fMRI

BACKGROUND AND PURPOSE: Functional neuroimaging can distinguish components of the pain experience associated with anticipation to pain from those associated with the experience of pain itself. Anticipation to pain is thought to increase the suffering of chronic pain patients. Inappropriate anxiety, of which anticipation is a component, is also a cause of disability. We present a pharmacological functional magnetic resonance imaging (fMRI) study in which we investigate the selective modulation by midazolam of brain activity associated with anticipation to pain compared to pain itself. METHODS: Eight right-handed male volunteers underwent fMRI combined with a thermal pain conditioning paradigm and midazolam (30 mug/kg) or saline administration on different occasions, with order randomized across volunteers. Volunteers learned to associate a colored light with either painful, hot stimulation or nonpainful, warm stimulation to the back of the left hand. RESULTS: Comparison of the period during thermal stimulation (pain-warm) revealed a network of brain activity commonly associated with noxious stimulation, including activities in the anterior cingulate cortex (ACC), the bilateral insular cortices (anterior and posterior), the thalamus, S1, the motor cortex, the brainstem, the prefrontal cortex and the cerebellum. Comparison of the periods preceding thermal stimulation (anticipation to pain-anticipation to warm) revealed activity principally in the ACC, the contralateral anterior insular cortex and the ipsilateral S2/posterior insula. Detected by a region-of-interest analysis, midazolam reduced the activity associated specifically with anticipation to pain while controlling for anticipation to warm. This was most significant in the contralateral anterior insula (P<.05). There were no significant drug effects on the activity associated with pain itself. CONCLUSION: In identifying a pharmacological effect on activity preceding but not during pain, we have successfully demonstrated an fMRI assay that can be used to study the action of anxiolytic agents in a relatively small cohort of humans.     

In-bone protein digestion followed by LC-MS/MS peptide analysis as a new way towards the routine proteomic characterization of human maxillary and mandibular bone tissue in oral surgery

Proteomic characterization of alveolar bones in oral surgery represents an analytical challenge due to their insoluble character. The implementation of a straightforward technique could lead to the routine use of proteomics in this field. This work thus developed a simple technique for the characterization of bone tissue for human maxillary and mandibular bones. It is based on the direct in-bone tryptic digestion of proteins in both healthy and pathological human maxillary and mandibular bone samples. The released peptides were then identified by the LC-MS/MS. Using this approach, a total of 1120 proteins were identified in the maxillary bone and 1151 proteins in the mandibular bone. The subsequent partial least squares–discrimination analysis (PLS-DA) of protein data made it possible to reach 100% discrimination between the samples of healthy alveolar bones and those of the bone tissue surrounding the inflammatory focus. These results indicate that the in-bone protein digestion followed by the LC-MS/MS and subsequent statistical analysis can provide a deeper insight into the field of oral surgery at the molecular level. Furthermore, it could also have a diagnostic potential in the differentiation between the proteomic patterns of healthy and pathological alveolar bone tissue. Data are available via ProteomeXchange with the identifier PXD026775.