Immunological determination of triazine pesticides bound to soil humic acids (bound residues)

An immunological method for the determination of triazine herbicides covalently bound to soil humic acids has been developed. A sandwich-immunoassay has been performed, based on both polyclonal humic acid-antibodies and monoclonal triazineantibodies. A peroxidase-labelled third antibody has been used for the photometric detection. A triazine-humic acid conjugate served as calibration standard. The coupling density for this conjugate has been determined by measuring the difference of free amino groups both with ninhydrin and with the trinitrobenzene sulfonic acid method. In addition, the coupling density has been confirmed by scintillation counting using a (14)C-atrazine derivative. Due to nonspecific interactions between antibody proteins and humic acids, different blocking steps had to be performed. Finally, the assay has been applied to a triazine contaminated soil sample. Humic acids (including bound residues) have been extracted by diluted sodium carbonate solution. Concentrations of bound atrazine residues have been found in the range of 2 mg/kg soil on fields where triazine herbicides has been applied over a period of 21 years. These results are comparable to both the applied amount and the nonextractable fraction.     

Tautomerism in monothio-β-diketones studied by PMR and quantum chemical calculations

It is shown by proton NMR and quantum chemical PCILO calculations that monothio-β-ketones

in solution exist as different isomers depending on substituents, solvent and temperature. In solvents with low dielectric constants the hydrogen-bridged cis enol form predominates, and is in fast equilibrium (in the NMR scale) with nonchelated trans enol forms down to ?100°C at least. Transition enthalpies are of the order of 7–15 kJ mol^?1. In compounds with R₂ = Me the rotation of the Me -CS group around the neighbouring C-C- bond can be detected and the thermodynamic and kinetic parameters estimated. The reason for the slowing down of this rotation, inferred from the line broadening in NMR, is probably the stabilization of a trans isomer by interaction between the protons of the methyl group and the lone pairs of the oxygen atom. There are no indications for the presence of chelated and non-chelated enethiol isomers from the PMR studies and quantum chemical calculations performed.     

Nonaqueous capillary electrophoresis with indirect electrochemical detection

Nonaqueous capillary electrophoresis (NACE) which makes use of organic solvents in place of conventional aqueous electrophoresis buffers is gaining increasing importance among modern separation techniques. Recently, it has been shown that amperometric detection in conjunction with acetonitrile-based NACE offers an extended accessible potential range and an enhanced long-term stability of the amperometric responses generated at solid electrodes. The present contribution takes advantage of the latter aspect to develop reliable systems for NACE with indirect electrochemical detection (IED). In this context, several compounds such as (ferrocenylmethyl)trimethylammonium perchlorate, tris(1,10-phenanthroline)cobalt(III) perchlorate and bis(1,4,7-triazacyclononane)nickel(II) perchlorate were studied regarding their suitability to act as electroactive buffer additives for IED in NACE. The performance characteristics for the respective buffer systems were evaluated. Tetraalkylammonium perchlorates served as model compounds for the optimization of the NACE-IED system. Target analytes choline and acetylcholine could easily be separated and determined by means of NACE-IED. In the case of a buffer system containing 10(-4) M tris(1,10-phenanthroline)cobalt(III) perchlorate the limits of detection were 2.5 x 10(-7) M and 4.6 x 10(-7) M for choline and acetylcholine, respectively. With the elaborated analytical procedure choline could be determined in pharmaceutical preparations.     

Validation studies and proficiency testing

Genetically modified organisms (GMOs) entered the European food market in 1996. Current legislation demands the labeling of food products if they contain <1% GMO, as assessed for each ingredient of the product. To create confidence in the testing methods and to complement enforcement requirements, there is an urgent need for internationally validated methods, which could serve as reference methods. To date, several methods have been submitted to validation trials at an international level; approaches now exist that can be used in different circumstances and for different food matrixes. Moreover, the requirement for the formal validation of methods is clearly accepted; several national and international bodies are active in organizing studies. Further validation studies, especially on the quantitative polymerase chain reaction methods, need to be performed to cover the rising demand for new extraction methods and other background matrixes, as well as for novel GMO constructs.     

Metallorganische Verbindungen des Kupfers XIII. Kupfer(I)-chlorid-Komplexe winkelgespannter Cycloheptine Synthesen und Röntgenstrukturanalysen

The strained cycloheptynes 2a, 2b and 2c react with copper(I) chloride to form the dinuclear complexes [CuCl(cycloheptyne)]₂ 3a, 3b and 3c respectively. X-ray diffraction studies on all three compounds 3 show an increase in strength of the copper-alkyne bond with increasing deformation of the alkyne moiety from the ideal 180°. Thus going from the least strained alkyne (2c) to the most strained one (2a), the Cu-C bond lengths in the corresponding complexes decrease from 197.5 pm (3c) to 194.9 pm (3a). The C≡C-C angles increase from 145.6° (3a) over 147.4° (3b) to 151.6° (3c).

Zusammenfassung

Die gespannten Cycloheptine 2a, 2b und 2c reagieren mit Kupfer(I)—chlorid unter Bildung der zweikernigen Komplexe [CuCl(cycloheptin)]₂ 3a, 3b und 3c. Röntgenstrukturanalysen von allen drei Verbindungen 3 zeigen, daβ die Stärke der Kupfer—Alkin-Bindung zunimmt je mehr das ganze Alkinsystem vom idealen 180°-Winkel abweicht. Geht man vom am wenigsten gespannten Alkin (2c) zum gespanntesten (2a), so nehmen die Cu-C-Bindungslängen in den entsprechenden Komplexen von 197.5 pm (3c) auf 194.9 pm (3a) ab. Die C≡C-C-Winkel werden von 145.6° (3a) über 147.4° (3b) nach 151.6° (3c) hin gröβer.     

Time-resolved fluorescence analysis of the mobile flavin cofactor in p -hydroxybenzoate hydroxylase

Conformational heterogeneity of the FAD cofactor in p-hydroxybenzoate hydroxylase (PHBH) was investigated with time-resolved polarized flavin fluorescence. For binary enzyme/substrate (analogue) complexes of wild-type PHBH and Tyr222 mutants, crystallographic studies have revealed two distinct flavin conformations; the ‘in’ conformation with the isoalloxazine ring located in the active site, and the ‘out’ conformation with the isoalloxazine ring disposed towards the protein surface. Fluorescence-lifetime analysis of these complexes revealed similar lifetime distributions for the ‘in’ and ‘out’ conformations. The reason for this is twofold. First, the active site of PHBH contains various potential fluorescence-quenching sites close to the flavin. Fluorescence analysis of uncomplexed PHBH Y222V and Y222A showed that Tyr222 is responsible for picosecond fluorescence quenching free enzyme. In addition, other potential quenching sites, including a tryptophan and two tyrosines involved in substrate binding, are located nearby. Since the shortest distance between these quenching sites and the isoalloxazine ring differs only little on average, these aromatic residues are likely to contribute to fluorescence quenching. Second, the effect of flavin conformation on the fluorescence lifetime distribution is blurred by binding of the aromatic substrates: saturation with aromatic substrates induces highly efficient fluorescence quenching. The flavin conformation is therefore only reflected in the small relative contributions of the longer lifetimes.     

Experimental and theoretical study of the adsorption of fumaramide [2]rotaxane on Au(111) and Ag(111) surfaces

Thin films of fumaramide [2]rotaxane, a mechanically interlocked molecule composed of a macrocycle and a thread in a "bead and thread" configuration, were prepared by vapor deposition on both Ag(111) and Au(111) substrates. X-ray photoelectron spectroscopy (XPS) and high-resolution electron-energy-loss spectroscopy were used to characterize monolayer and bulklike multilayer films. XPS determination of the relative amounts of carbon, nitrogen, and oxygen indicates that the molecule adsorbs intact. On both metal surfaces, molecules in the first adsorbed layer show an additional component in the C 1s XPS line attributed to chemisorption via amide groups. Molecular-dynamics simulation indicates that the molecule orients two of its eight phenyl rings, one from the macrocycle and one from the thread, in a parallel bonding geometry with respect to the metal surfaces, leaving three amide groups very close to the substrate. In the case of fumaramide [2]rotaxane adsorption on Au(111), the presence of certain out-of-plane phenyl ring and Au-O vibrational modes points to such bonding and a preferential molecular orientation. The theoretical and experimental results imply that the three-dimensional intermolecular configuration permits chemisorption at low coverage to be driven by interactions between the three amide functions of fumaramide [2]rotaxane and the Ag(111) or Au(111) surface.     

Aminosulf(ox)ides as ligands for Iridium(I)-catalyzed asymmetric transfer hydrogenation

A new class of efficient catalysts was developed for the asymmetric transfer hydrogenation of unsymmetrical ketones. A series of chiral N,S-chelates (6-22) was synthesized to serve as ligands in the iridium(I)-catalyzed reduction of ketones. Both formic acid and 2-propanol proved to be suitable as hydrogen donors. Sulfoxidation of an (R)-cysteine-based aminosulfide provided a diastereomeric ligand family containing a chiral sulfur atom. The two chiral centers of these ligands showed a clear effect of chiral cooperativity. In addition, aminosulfides containing two asymmetric carbon atoms in the backbone were synthesized. Both the sulfoxide-containing beta-amino alcohols and the aminosulfides derived from 1,2-disubstituted amino alcohols gave rise to high reaction rates and moderate to excellent enantioselectivities in the reduction of various ketones. The enantioselective outcome of the reaction was favorably affected by selecting the most appropriate hydrogen donor. Enantioselectivities of up to 97% were reached in the reduction of aryl-alkyl ketones.     

Λ-buildings and base change functors

We prove an analog of the base change functor of Λ-trees in the setting of generalized affine buildings. The proof is mainly based on local and global combinatorics of the associated spherical buildings. As an application we obtain that the class of generalized affine buildings is closed under taking ultracones and asymptotic cones. Other applications involve a complex of groups decompositions and fixed point theorems for certain classes of generalized affine buildings.