Synthese und thermische Eigenschaften von molekularen Clusterverbindungen zusammengesetzt aus Elementen der Gruppen 11‐13‐16

Syntheses and Thermal Properties of Cluster Molecules, formed from Groups 11‐13‐16 Elements In the presence of PPh₃, CuX (X = Cl, CH₃COO) or AgOC(O)C₆H₅ and GaCl₃ react in THF with S(SiMe₃)₂ or Se(SiMe₃)₂ to yield [Cu₆Ga₈Cl₄S₁₃(PPh₃)₆] ( 1 ), [Cu₆Ga₈Cl₄Se₁₃(PPh₃)₆] ( 2 ), [Ag₆Ga₈Cl₄S₁₃(PPh₃)₆] ( 4 ) and [Ag₆Ga₈Cl₄Se₁₃(PPh₃)₆] ( 5 ). The use of PⁿPr₂Ph instead of PPh₃ and subsequent layering with n‐hexane leads to the formation of the cluster [Cu₆Ga₈Cl₄Se₁₃(PⁿPr₂Ph)₁₂] ( 3a , 3b ). Reaction of CuCl, GaCl₃ and PⁿPr₃ with Se(SiMe₃)₂ in THF results in the crystallisation of the ionic cluster (HPⁿPr₃)₂[Cu₂Ga₄Cl₄Se₆(PⁿPr₃)₄] ( 6 ). The structures of 1 — 6 were determined by X‐ray single crystal structure analysis. Thermogravimetric measurements of the cluster molecules and powder diffraction patterns of the remaining powders reveal the potential use of them as single source precursor compounds for the synthesis of the related ternary solid state materials.     

Polarographische Bestimmung des Pyridoxols in pharmazeutischen Präparaten

Zusammenfassung Es wird eine neue polarographische Methode zur direkten Bestimmung des Pyridoxols in Injektionspräparaten und Tabletten beschrieben. Die ausgearbeitete Methode beruht auf der polarographischen Reduktion des Pyridoxolmoleküls im Milieu von Ammoniak-Ammoniumchlorid-Puffern und weiter auf der Bildung einer katalytischen Stufe des Pyridoxols in Veronalpuffern. Die polarographische Methode ist rascher und in manchen Fällen genauer und empfindlicher als die bisher in Gebrauch stehenden Methoden. Die Anwesenheit der in den Präparaten laufend vorkommenden Begleitstoffe des Pyridoxols stört nicht die polarographische Bestimmung. Die Methode kann auch zur Bestimmung des 3-Hydroxy-4-methoxymethyl-5-oxymethyl-2-methylpyridins benutzt werden, das ein Zwischenprodukt bei der Pyridoxolerzeugung ist.

---

Summary A new polarographic method is described for the direct determination of pyridoxol in injection preparations and tablets. This method is based on the polarographic reduction of the pyridoxol in ammonia-ammonium chloride buffer medium and also on the formation of a catalytic stage of the pyridoxol in veronal buffers. The polarographic method is faster and in many cases more accurate and more sensitive than the methods now in use. The presence of the materials which always accompany the pyridoxol in the preparations does not interfere with the polarographic determination. The method can likewise be used for determining 3-hydroxy-4-methoxymethyl-5-oxymethyl-2-methylpyridine, which is an intermediate product in the manufacture of pyridoxol.

---

Résumé On décrit une nouvelle méthode polarographique pour le dosage direct du pyridoxol dans les préparations pour injections et dans les comprimés. La méthode élaborée repose sur la réduction polarographique de la molécule de pyridoxol dans le milieu tampon ammoniaque-chlorure d'ammonium, et, en outre, sur la formation d'une phase catalytique du pyridoxol dans les tampons au véronal. La méthode polarographique est plus rapide et dans de nombreux cas plus exacte et plus sensible que les méthodes utilisées jusqu'ici. La présence d'impuretés existant couramment dans les préparations à côté du pyridoxol ne gêne pas le dosage polarographique. On peut aussi utiliser la méthode pour le dosage de l'hydroxy-3 méthoxyméthyl-4 oxyméthyl-5 méthyl-2 pyridine, substance intermédiaire dans la préparation du pyridoxol.

---

---

Herrn Dr.P. Zuman danken wit für Ratsehläge bei der Abfassung dieser Arbeit.     

Catalytic transesterification of dialkyl phosphates by a bioinspired dicopper(II) macrocyclic complex

For a number of phosphoryltransfer enzymes, including the exonuclease subunit of DNA polymerase I, a mechanism involving two-metal ions and double Lewis-acid activation of the substrate, combined with leaving group stabilization, has been proposed. Inspired by the active site structure of this enzyme, we have designed as a synthetic phosphoryl transfer catalyst the dicopper(II) macrocyclic complex LCu(2). Crystal structures of complexes [(L)Cu(2)(mu-NO(3))(NO(3))](NO(3))(2) (1), [(L)Cu(2)(mu-CO(3))(CH(3)OH)](BF(4))(2) (2), and [(L)Cu(2)(mu-O(2)P(OCH(3))(2))(NO(3))](NO(3))(2) (3) illustrate various possibilities for the interaction of oxoanions with the dicopper(II) site. 1 efficiently promotes the transesterification of dimethyl phosphate (DMP) in CD(3)OD, k(cat) = 2 x 10(-)(4) s(-)(1) at 55 degrees C. 1 is the only available catalyst for the smooth transesterification of highly inert simple dialkyl phosphates. From photometric titrations and the pH dependence of reactivity, we conclude that a complex [(L)Cu(2)(DMP)(OCH(3))](2+) is the reactive species. Steric bulk at the -OR substituents of phosphodiester substrates O(2)P(OR)(2)(-) drastically reduces the reactivity of 1. This is explained with -OR leaving group stabilization by Cu coordination, an interaction which is sensitive to steric crowding at the alpha-C-atom of substituent R. A proposed reaction mechanism related to that of the exonuclease unit of DNA polymerase I is supported by DFT calculations on reaction intermediates. The complex [(L)Cu(3)(mu(3)-OH)(mu-CH(3)O)(2)(CH(3)CN)(2)](ClO(4))(3) (4) incorporates a [Cu(OH)(OCH(3))(2)(CH(3)CN)(2)](-) complex anion, which might be considered as an analogue of the [PO(2)(OCH(3))(2)(OCD(3))](2)(-) transition state (or intermediate) of DMP transesterification catalyzed by LCu(2).     

New approach to calibrating conductivity meters in the low conductivity range

There is currently a major issue with the calibration of conductivity meters used for high purity water: the lack of availability of a reference material or reference methods for low conductivity ranges (conductivity below 1 S cm^–1 at 25.0 °C, resistivity >1 M cm at 25.0 °C). This paper describes the current status of conductivity measurements in high purity water. A new and improved approach, currently being investigated, should allow us to make the calibration of conductivity meters used for low conductivity ranges traceable to the SI.Milipore, Milli-Q and Elix are registered trademarks of Millipore Corporation.     

Functionalized Self-Assembled Monolayers on Gold as Binding Matrices for the Screening of Antibody-Antigen Interactions

Two different types of -substituted alkanethiol/disulfide compounds have been used to prepare monolayer architectures on gold serving as platforms for the immobilization of receptor probe molecules – antibodies. These are: (i) carboxylic acid alkanethiols post-reacted with amino biotin to generate streptavidin surfaces, and (ii) N-hydroxysuccinimide-terminated disulfide surfaces. The properties of the monolayers, with and without attached receptor probe molecules, were analysed using infrared spectroscopy, ellipsometry, fluorescence scanning and atomic force microscopy. Several experimental parameters, such as condensation reagents, additives, probe and target concentrations and immobilization time, were systematically varied to determine the dynamic range and to optimize the sensitivity and signal-to-noise ratio of the biochip platforms. Fluorescence screening using Cy5-labelled antigens finally demonstrated that both surfaces could be successfully employed to immobilize the antibodies. The pros and cons of the two approaches are also discussed.Received November 15, 2002; accepted March 25, 2003 Published online July 28, 2003     

Thermal and structural study on the lattice compound 1,4-diammoniumbutane bis(theophyllinate)

Crystalline title compound (1) prepared from aqueous solution of theophylline and 1,4-diaminobutane has been structurally and thermally characterized. Both the two-step TG decomposition curve and elemental analysis of the hexagonal crystals show that it consists of theophylline and 1,4-diaminobutane in 2:1 molar ratio. Actually, presence of one type of both theophyllinate anions and 1,4-diammoniumbutane dication have been indicated by FTIR spectroscopy. The molecular structure of lattice compound (1) has been determined by single crystal X-ray diffraction, where the hydrogen positions have been obtained from differential Fourier maps. It has confirmed that the crystal is really built up from these ionic constituents bound together with an extensive net of hydrogen bonds. The coupled TG-FTIR analysis of the evolved gases has revealed that the diamine is released as a whole molecule in the first decomposition step. Clathrate 1 and the proton migration in it might serve as a structural model of solid aminophylline whose crystal structure is still unknown.     

Preparation and practical application of spinel pigment Co0.46Zn0.55(Ti0.064Cr0.91)2O4

Synthesis of the green spinel pigment Co_0.46Zn_0.55(Ti_0.064Cr_0.91)₂O₄ by a novel two-step method of preparation have been investigated. Inorganic pigments are almost always prepared by a solid state reaction. It is classical ceramic method which used oxides, hydroxides or carbonates as precursors. The reaction is performed at temperature higher than 1300°C and an agent of mineralization is usually present. The presented novel method of preparation decreases the calcining temperature necessary for reaching of bright and clear hue of the pigments prepared. Main attention was focused on the influence of two types of titanium raw materials on the temperature region of the spinel structure formation and on the colour properties of the pigments. The mixture of precursors with TiO₂ gives a one-phase system when calcining at 1100°C but the colour properties are more interesting at 1150°C. Thermal stability of this pigment is limited by temperature 1300°C. This temperature is connected with partial oxidation of Cr(III) to Cr(VI). Thermal analysis provided the first information about the temperature region of the pigment formation and determined the thermal stability of pigment.     

Azobridges from azines, XVII. Intra- and intermolecular [3+2] cycloaddition between nonstabilized azomethineimines and alkenes

Azo compounds 1 and 3 containing a CC-double bond in a parallel but distant position are quatemized by Me₃OBF₄ to 1,MeBF₄ and 3,MeBF₄, whereas MeI produces the cage compounds 2,HX and 4,HX. These [3+2] cycloadducts also are quantitatively formed from 1,MeBF₄ and 3,MeBF₄ with catalytic amounts of azo compounds. Intermolecular [3+2] cycloadditions occur with a mixture of DBH (5) or DBO (8), MeI and a variety of alkenes (→ HI) salts of (6, 7, 9 — 12). The intermediate azomethineimines, if stabilized by a fluorenylidene group, can be isolated (20, 22,24), but not, however, in the presence of a close parallel CC-bond (25 → 26).     

Solubility Enhancement of Low Soluble Biologically Active Compounds by β-Cyclodextrin and Dimethyl-β-cyclodextrin

The solubility enhancement of triflumizole by complexation with -cyclodextrin and with dimethyl--cyclodextrin is compared with respect to the different physico-chemical properties of the host molecules. Although the inclusion reaction constants are rather similar for both complexation reactions, a completely different temperature dependence of the host-guest interaction is observed, which indicates a change of the reaction mechanisms. Moreover, the influence of ethanol as cosolvent is studied.     

Identification of mouse brain proteins after two-dimensional electrophoresis and electroblotting by microsequence analysis and amino acid composition analysis

Two-dimensional electrophoretic separation and immobilization of proteins onto inert membranes for subsequent amino acid sequence and amino acid composition analysis is described as a rapid procedure for the identification or characterization of proteins from complex mixtures. This method avoids the drawbacks of classical purification and isolation methods which involve time-consuming operations with low resolution and, often, insufficient yields. Excellent overall yields of minor amounts (in the low microgram range) using this method allow for sequence determination of yet inaccessible proteins. Solubilized cell proteins of mouse brain were separated by high resolution two-dimensional electrophoresis and electroblotted onto a siliconized glass fiber membrane. The immobilized proteins were stained with Coomassie Brilliant Blue R-250, and twelve proteins spots were then submitted to both Edman degradation and amino acid analysis. Proteins were identified by comparison of the experimentally determined amino acid composition with a dataset derived from the Protein Identification Resource (PIR) protein sequence database. Eight out of twelve proteins tested were identified by amino acid analysis and confirmed by N-terminal sequence determination.