High-frequency and -field electron paramagnetic resonance of high-spin manganese(III) in tetrapyrrole complexes

High-field and -frequency electron paramagnetic resonance (HFEPR) spectroscopy has been used to study three complexes of high spin Manganese(III), 3d4, S = 2. The complexes studied were tetraphenylporphyrinatomanganese(III) chloride (MnTPPCI), phthalocyanatomanganese(III) chloride (MnPcCl), and (8,12-diethyl-2,3,7,13,17,18-hexamethylcorrolato)manganese(III) (MnCor). We demonstrate the ability to obtain both field-oriented (single-crystal like) spectra and true powder pattern HFEPR spectra of solid samples. The latter are obtained by immobilizing the powder, either in an n-eicosane mull or KBr pellet. We can also obtain frozen solution HFEPR spectra with good signal-to-noise, and yielding the expected true powder pattern. Frozen solution spectra are described for MnTPPCl in 2:3 (v/v) toluene/CH2Cl2 solution and for MnCor in neat pyridine (py) solution. All of the HFEPR spectra have been fully analyzed using spectral simulation software and a complete set of spin Hamiltonian parameters has been determined for each complex in each medium. Both porphyrinic complexes (MnTPPCl and MnPcCl) are rigorously axial systems, with similar axial zero-field splitting (zfs): D approximately -2.3 cm(-1), and g values quite close to 2.00. In contrast, the corrole complex, MnCor, exhibits slightly larger magnitude, rhombic zfs: D approximtely -2.6 cm(-1), absolute value(E) approximately 0.015 cm(-1), also with g values quite close to 2.00. These results are discussed in terms of the molecular structures of these complexes and their electronic structure. We propose that there is a significant mixing of the triplet (S = 1) excited state with the quintet (S= 2) ground state in Mn(III) complexes with porphyrinic ligands, which is even more pronounced for corroles.     

Novel method for bulk resistance evaluation in conductivity measurement for high-purity water

A major issue with the electrolytic conductivity measurement for pure water is the lack of standard or reference methods. A primary method traceable to SI and suitable for pure-water conductivity measurement was developed at the Physikalisch-Technische Bundesanstalt (PTB), Germany, as the base for the calibration method for the conductivity measuring devices at the low conductivity level. This paper provides a novel method to calculate the bulk resistance of pure water using impedance measured at a single frequency, which is one of the key procedures for the primary methods.     

The electronic structure of FeV-cofactor in vanadium-dependent nitrogenase

The electronic structure of the active-site metal cofactor (FeV-cofactor) of resting-state V-dependent nitrogenase has been an open question, with earlier studies indicating that it exhibits a broad S = 3/2 EPR signal (Kramers state) having g values of ∼4.3 and 3.8, along with suggestions that it contains metal-ions with valencies [1V³⁺, 3Fe³⁺, 4Fe²⁺]. In the present work, genetic, biochemical, and spectroscopic approaches were combined to reveal that the EPR signals previously assigned to FeV-cofactor do not correlate with active VFe-protein, and thus cannot arise from the resting-state of catalytically relevant FeV-cofactor. It, instead, appears resting-state FeV-cofactor is either diamagnetic, S = 0, or non-Kramers, integer-spin (S = 1, 2 etc.). When VFe-protein is freeze-trapped during high-flux turnover with its natural electron-donating partner Fe protein, conditions which populate reduced states of the FeV-cofactor, a new rhombic S = 1/2 EPR signal from such a reduced state is observed, with g = [2.18, 2.12, 2.09] and showing well-defined ⁵¹V (I = 7/2) hyperfine splitting, a_iso = 110 MHz. These findings indicate a different assignment for the electronic structure of the resting state of FeV-cofactor: S = 0 (or integer-spin non-Kramers state) with metal-ion valencies, [1V³⁺, 4Fe³⁺, 3Fe²⁺]. Our findings suggest that the V³⁺ does not change valency throughout the catalytic cycle.

Active site FeV-cofactor of the V-nitrogenase and the EPR spectrum of the reduced cofactor showing ⁵¹V-hyperfine coupling.     

Channel activity of a viral transmembrane peptide in micro-BLMs: Vpu(1-32) from HIV-1

We report for the first time on pore-suspending lipid bilayers, which we call micro-black lipid membranes (micro-BLMs), based on a highly ordered macroporous silicon array. Micro-BLMs were established by first functionalizing the backside porous silicon surface with gold and then chemisorbing 1,2-dipalmitoyl-sn-glycero-3-phosphothioethanol followed by spreading 1,2-diphytanoyl-sn-glycero-3-phosphocholine dissolved in n-decane. Impedance spectroscopy revealed the formation of single lipid bilayers confirmed by a mean specific capacitance of 0.6 +/- 0.2 microF/cm2. Membrane resistances were in the G omega-regime and beyond. The potential of the system for single channel recordings was demonstrated by inserting the transmembrane domain of the HIV-1 accessory peptide Vpu(1-32), which forms helix bundles with characteristic opening states. We elucidated different amilorides as potential drugs to inhibit channel activity of Vpu.     

Immunological determination of triazine pesticides bound to soil humic acids (bound residues)

An immunological method for the determination of triazine herbicides covalently bound to soil humic acids has been developed. A sandwich-immunoassay has been performed, based on both polyclonal humic acid-antibodies and monoclonal triazineantibodies. A peroxidase-labelled third antibody has been used for the photometric detection. A triazine-humic acid conjugate served as calibration standard. The coupling density for this conjugate has been determined by measuring the difference of free amino groups both with ninhydrin and with the trinitrobenzene sulfonic acid method. In addition, the coupling density has been confirmed by scintillation counting using a (14)C-atrazine derivative. Due to nonspecific interactions between antibody proteins and humic acids, different blocking steps had to be performed. Finally, the assay has been applied to a triazine contaminated soil sample. Humic acids (including bound residues) have been extracted by diluted sodium carbonate solution. Concentrations of bound atrazine residues have been found in the range of 2 mg/kg soil on fields where triazine herbicides has been applied over a period of 21 years. These results are comparable to both the applied amount and the nonextractable fraction.     

Synthesis of (r)- and (s)-1-formyl-6,7,8,9-tetrahydro- N,N-(dipropyl)-3H-benz[e]indol-8-amines: Potent and orally active 5-ht1a receptor agonists

An efficient synthesis of the potent and orally active 5-HT_1A agonists, (R)-(+)- and (S)-(-)-1-formyl-6,7,8,9-tetrahydro-N,N-dipropyl-3H-benz[e]indol-8-amines 1a and 1b , is described. This synthesis was accomplished in twelve steps from commercially available 1,5,6,7-tetrahydro-4H-indol-4-one ( 5 ). The key step involved a regio-controlled Friedel-Crafts acylation of 1-(p-toluenesulfonyl)indol-4-acetyl chloride with ethylene to yield a versatile synthon, 3-(p-toluenesulfonyl)-6,7,8,9-tetrahydro-3H-benz[e]indol-8-one ( 10 ). Subsequent coupling of this ketone with chiral α-methylbenzylamine under reductive amination conditions yielded a mixture of diastereomers. These diastereomers were efficiently separated by either chromatography or fractional recrystallization of the derived hydrochloride salts. Debenzylation of the pure diastereomers was followed by alkylation and formylation to yield (R)-(+)- and (S)-(-)-enantiomers 1a and 1b with >99% purity.     

Nonaqueous capillary electrophoresis with indirect electrochemical detection

Nonaqueous capillary electrophoresis (NACE) which makes use of organic solvents in place of conventional aqueous electrophoresis buffers is gaining increasing importance among modern separation techniques. Recently, it has been shown that amperometric detection in conjunction with acetonitrile-based NACE offers an extended accessible potential range and an enhanced long-term stability of the amperometric responses generated at solid electrodes. The present contribution takes advantage of the latter aspect to develop reliable systems for NACE with indirect electrochemical detection (IED). In this context, several compounds such as (ferrocenylmethyl)trimethylammonium perchlorate, tris(1,10-phenanthroline)cobalt(III) perchlorate and bis(1,4,7-triazacyclononane)nickel(II) perchlorate were studied regarding their suitability to act as electroactive buffer additives for IED in NACE. The performance characteristics for the respective buffer systems were evaluated. Tetraalkylammonium perchlorates served as model compounds for the optimization of the NACE-IED system. Target analytes choline and acetylcholine could easily be separated and determined by means of NACE-IED. In the case of a buffer system containing 10(-4) M tris(1,10-phenanthroline)cobalt(III) perchlorate the limits of detection were 2.5 x 10(-7) M and 4.6 x 10(-7) M for choline and acetylcholine, respectively. With the elaborated analytical procedure choline could be determined in pharmaceutical preparations.     

Validation studies and proficiency testing

Genetically modified organisms (GMOs) entered the European food market in 1996. Current legislation demands the labeling of food products if they contain <1% GMO, as assessed for each ingredient of the product. To create confidence in the testing methods and to complement enforcement requirements, there is an urgent need for internationally validated methods, which could serve as reference methods. To date, several methods have been submitted to validation trials at an international level; approaches now exist that can be used in different circumstances and for different food matrixes. Moreover, the requirement for the formal validation of methods is clearly accepted; several national and international bodies are active in organizing studies. Further validation studies, especially on the quantitative polymerase chain reaction methods, need to be performed to cover the rising demand for new extraction methods and other background matrixes, as well as for novel GMO constructs.     

Synthesis and structural characterization of integrally oxidized, metal-free phthalocyanine compounds: [H(2)(pc)][IBr(2)] and [H(2)(pc)](2)[IBr(2)]Br.C(10)H(7)Br

The first integrally oxidized metal-free phthalocyanine compounds have been synthesized by chemical oxidation. Phthalocyanine (H(2)(pc), pc = phthalocyaninato) was oxidized with IBr to afford the compounds [H(2)(pc)][IBr(2)] (1) and [H(2)(pc)](2)[IBr(2)]BrAC(10)H(7)Br (2), whose structures were determined by means of single-crystal X-ray diffraction methods: [H(2)(pc)][IBr(2)], P2(1)/c, a = 8.0272(9) A, b = 21.258(2) A, c = 18.1439(2) A, beta = 113.975(2) degrees, V = 2828.8(5) A(3), T = 153 K, Z = 4; [H(2)(pc)](2)[IBr(2)]Br.C(10)H(7)Br, P, a = 8.4724(6) A, b = 13.5794(10) A, c = 13.8403(10) A, alpha = 90.854(1) degrees, beta = 103.417(1) degrees, gamma = 97.049(1)E degrees, V = 1535.61(19) A(3), T = 153 K, Z = 1. The extended structure of [H(2)(pc)][IBr(2)] comprises slipped columns of pc rings stacked along the a axis in adjacent columns at approximately 70 degrees to one another. IBr(2-) ions occupy the interstitial columns. The extended structure of [H(2)(pc)](2)[IBr(2)]Br.C(10)H(7)Br comprises slant stacks of pc rings along the crystallographic a axis with IBr(2-) ions, Br(-) ions, and disordered 1-bromonaphthalene molecules in the adjacent, parallel columns. The overall reaction for the formation of 1 is 2H(2)(pc) + 4IBr --> 2[H(2)(pc)][IBr(2)] + I(2), and the overall reaction for the formation of 2 (not including solvent) is 2H(2)(pc) + 3IBr --> [H(2)(pc)](2)Br[IBr(2)] + I(2).