Parallel solution-phase synthesis of (Z)-3-(arylamino)-2,3-dehydroalanine derivatives and solid-phase synthesis of fused pyrimidones

N-Protected (Z)-3-(arylamino)-2,3-dehydroalanine esters 5 and 10 were prepared in one step from methyl (Z)-2-acylamino-3-(dimethylamino)prop-2-enoates 3 and 9 and anilines 4 employing a parallel solution-phase synthetic approach. In most cases, analytically pure products 5 and 10 were obtained. On the other hand, a three-step parallel solid-phase synthesis of 2-acetylamino-4H-azino[1,2-x]pyrimidin-4-ones 15 via the polymer-bound methyl (Z)-2-acetylamino-3-(dimethylamino)prop-2-enoate (12) was also developed.     

Precipitation from homogeneous solution by photochemical action: determination of thorium

Thorium was precipitated from homogeneous solution by photochemical reduction of periodate to iodate in a solution containing thorium and perchloric acid, by means of a 2537 A low-pressure mercury vapour lamp. For weighing, the precipitate was redissolved, precipitated once as thorium hydroxide, and finally as thorium oxalate, which was ignited to thorium dioxide. Quantitative results were obtained in the range 35-180 mg of thorium.     

Synthesis and structures of zirconium amide-iodide complexes

Zirconium amide-iodide complexes were synthesized for possible use as chemical vapor deposition precursors to zirconium nitride films. The series of six complexes Zr(NR(2))(4-n)I(n)(R = Me or Et; n = 1-3) was prepared by reacting ZrI(4) and Zr(NR(2))(4) in hot toluene. X-ray crystallographic analyses were performed for Zr(NMe(2))(3)I, Zr(NEt(2))(2)I(2), and Zr(NEt(2))I(3). In the solid state, Zr(NMe(2))(3)I and Zr(NEt(2))(2)I(2) are the discrete dimers [Zr(NMe(2))(2)I(mu-NMe(2))](2) and [Zr(NEt(2))(2)I(mu-I)](2), and Zr(NEt(2))I(3) is the polymer of dimers ([Zr(NEt(2))I(2)(mu-I)](2))(n). In solution, Zr(NEt(2))(3)I is proposed to be monomeric on the basis of NMR data and a molecular weight determination. The complex Zr(NEt(2))(3)I is the most promising precursor candidate because of its physical properties.     

Formation of Zn(1-x)MnxS nanowires within mesoporous silica of different pore sizes

Arrays of highly ordered Zn(1-x)MnxS quantum wires with x ranging from 0.01 to 0.3 and with lateral dimensions of 3, 6, and 9 nm were synthesized within mesoporous SiO2 host structures of the MCM-41 and SBA-15 type. The hexagonal symmetry of these arrays (space group p6m) and the high degree of order was confirmed by X-ray diffraction and transmission electron microscopy (TEM) studies. Physisorption measurements show the progressive filling of the pores of the SiO2 host structures, while TEM and Raman studies reveal the wire-like character of the incorporated Zn(1-x)MnxS nanostructures. X-ray absorption near-edge structure, extended X-ray absorption fine structure, photoluminescence excitation (PLE), and electron paramagnetic resonance studies confirm the good crystalline quality of the incorporated Zn(1-x)MnxS guest species and, in particular, that the Mn2+ ions are randomly distributed and are situated on tetrahedrally coordinated cation sites of the Zn(1-x)MnxS wires for all x up to 0.3. The amount of Mn2+ ions loosely bound to the surface of the Zn(1-x)MnxS nanowires is less than 4% of the total Mn content even for the 3 nm nanostructures up to the highest Mn content of x = 0.3. The effects of the reduction of the lateral dimensions on electronic properties of the diluted magnetic semiconductor were studied by PLE spectroscopy. Due to the quantum confinement of the excitons in the wires an increase of the direct band gap with decreasing particle size is observed.     

The reactive states of ions: Dimethyl-hexadienes and tetramethylcyclobutenes

The principal decomposition routes of molecular ions of cis, cis-3,4-dimethyl-2-4-hexadiene, cis, trans-3,4-dimethyl-2,4-hexadiene, cis-1,2,3,4-tetramethylcyclobutene and trans-1,2,3,4-tetramethylcyclobutene were studied using ion kinetic energy spectroscopy. Evidence indecates that loss of radicals from [M]⁺· appears to proceed via an electronically excited state, while loss of a neutral molecule appears to involve complete equilibration of structure within the system, or may involve both ground state and excited state pathways.     

Single-molecule fluorescence detection in microfluidic channels—the Holy Grail in μTAS?

Both single-molecule detection (SMD) methods and miniaturization technologies have developed very rapidly over the last ten years. By merging these two techniques, it may be possible to achieve the optimal requirements for the analysis and manipulation of samples on a single molecule scale. While miniaturized structures and channels provide the interface required to handle small particles and molecules, SMD permits the discovery, localization, counting and identification of compounds. Widespread applications, across various bioscience/analytical science fields, such as DNA-analysis, cytometry and drug screening, are envisaged. In this review, the unique benefits of single fluorescent molecule detection in microfluidic channels are presented. Recent and possible future applications are discussed.Dedicated to the memory of Wilhelm Fresenius     

Highly stereoselective syntheses of syn- and anti-1,2-amino alcohols

The reduction of N-protected amino ketones can be carried stereoselectively to produce either the syn- or anti-amino alcohol diastereomer. Carbamate-protected amino ketones can be reduced predictably and selectively to anti-amino alcohols with LiAlH(O-t-Bu)3 in ethanol at -78 degrees C. N-Trityl-protected amino ketones can be reduced selectively to syn-amino alcohols with LiAlH(O-t-Bu)3 in THF at -5 degrees C.     

Prerequisites for peptidomic analysis of blood samples: II. Analysis of human plasma after oral glucose challenge -- a proof of concept

Mass spectrometric plasma analysis for biomarker discovery has become an exploratory focus in proteomic research: the challenges of analyzing plasma samples by mass spectrometry have become apparent not only since the human proteome organization (HUPO) has put much emphasis on the human plasma proteome. This work demonstrates fundamental proteomic research to reveal sensitivity and quantification capabilities of our Peptidomics technologies by detecting distinct changes in plasma peptide composition in samples after challenging healthy volunteers with orally administered glucose. Differential Peptide Display (DPD) is a technique for peptidomics studies to compare peptides from distinct biological samples. Mass spectrometry (MS) is used as a qualitative and quantitative analysis tool without previous trypsin digestion or labeling of the samples. Circulating peptides (< 15 kDa) were extracted from 1.3 mL plasma samples and the extracts separated by liquid chromatography into 96 fractions. Each fraction was subjected to MALDI MS, and mass spectra of all fractions were combined resulting in a 2D-display of > 2,000 peptides from each sample. Endogenous peptides that responded to oral glucose challenge were detected by DPD of pre-and post-challenge plasma samples from 16 healthy volunteers and subsequently identified by nESI-qTOF MS. Two of the 15 MS peaks that were significantly modulated by glucose challenge were subsequently identified as insulin and C-peptide. These results were validated by using immunoassays for insulin and C-peptide. This paper serves as a proof of principle for proteomic biomarker discovery down to the pM concentration range by using small amounts of human plasma.     

An insight into the aromaticity of fullerene anions: experimental evidence for diamagnetic ring currents in the five-membered rings of C(60)(6-) and C(70)(6-)

Reduction of the two "closed" [6,6] methanofullerenes, [6,6]C(61)H(2) (1) and [6,6]C(71)H(2) (5), to the corresponding hexaanions with lithium metal causes the bridgehead-bridgehead bonds to open, at least partially, and this change gives rise to diamagnetic ring currents in the resulting homoconjugated six-membered rings (6-MRs). These new ring currents shield the overlying hydrogen atoms on the methylene bridge and induce upfield shifts of 1.60 and 0.11 ppm in their (1)H NMR resonances, respectively. Analogous reduction of the already "open" [5,6]methanofullerenes, [5,6]C(61)H(2) (2) and [5,6]C(71)H(2) (3 and 4), only slightly enhances the shielding of the hydrogen atoms over the homoconjugated 6-MRs (upfield shifts of 0.13, 0.68, and 0.14 ppm, respectively) but leads to exceptionally strong diamagnetic ring currents in the homoconjugated five- membered rings (5-MRs), as evidenced by dramatic shielding of the hydrogen atoms situated over them (upfield shift of 5.01, 6.78, and 1.63 ppm, respectively). The strongest shielding is seen for the hydrogen atom sitting over the 5-MR at the pole of C(71)H(2)(6)(-) (delta = -0.255 ppm) indicating that the excess charge density is concentrated at the poles.     

Interfacial micellar structures from novel amphiphilic star polymers

An amphiphilic heteroarm star polymer containing 12 alternating hydrophobic/hydrophilic arms of polystyrene (PS) and poly(acrylic acid) (PAA) connected to a well-defined rigid aromatic core was studied at the air-water and the air-solid interfaces. At the air-water interface, the molecules spontaneously form pancakelike micellar aggregates which measure up to several microns in diameter and 5 nm in thickness. Upon reduction of the surface area per molecule to 7 nm2, the two-dimensional micelles merged into a dense monolayer. We suggest that confined phase separation of dissimilar polymer arms occurred upon their segregation on the opposite sides of the rigid disklike aromatic core, forcing the rigid cores to adopt a face-on orientation with respect to the interface. Upon transfer onto solid supports the PS chains face the air-film interface making it completely hydrophobic, and the PAA chains were found to collapse and form a thin flattened underlayer. This study points toward new strategies to create large 2D microstructures with facial amphiphilicity and suggests a profound influence of star molecular architecture on the self-assembly of amphiphiles at the air-water interface.