Immunological determination of triazine pesticides bound to soil humic acids (bound residues)

An immunological method for the determination of triazine herbicides covalently bound to soil humic acids has been developed. A sandwich-immunoassay has been performed, based on both polyclonal humic acid-antibodies and monoclonal triazineantibodies. A peroxidase-labelled third antibody has been used for the photometric detection. A triazine-humic acid conjugate served as calibration standard. The coupling density for this conjugate has been determined by measuring the difference of free amino groups both with ninhydrin and with the trinitrobenzene sulfonic acid method. In addition, the coupling density has been confirmed by scintillation counting using a (14)C-atrazine derivative. Due to nonspecific interactions between antibody proteins and humic acids, different blocking steps had to be performed. Finally, the assay has been applied to a triazine contaminated soil sample. Humic acids (including bound residues) have been extracted by diluted sodium carbonate solution. Concentrations of bound atrazine residues have been found in the range of 2 mg/kg soil on fields where triazine herbicides has been applied over a period of 21 years. These results are comparable to both the applied amount and the nonextractable fraction.     

1-Ethoxycarbonyl-3-ferrocenyl-propan-1,3-dion und Ferrocen-1,1'bis(2,4-dioxobutansäureethylester) als Liganden für Übergangsmetallionen. Kristallstruktur von Bis(1-ethoxycarbonyl-3-ferrocenyl-propan-1,3dionato)kupfer(II)

1-Ethoxycarbonyl-3-ferrocenyl-propane-1,3-dion and Ferrocene-1,1′bis(2,4-dioxobutanoic acid ethylester) as Ligands for Transition Metal Ions. Crystal Structure of Bis(1-ethoxycarbonyl-3-ferrocenyl-propane-1,3dionato)copper(II) The ligands 1-ethoxycarbonyl-3-ferrocenyl-propane-1,3-dion and ferrocene-1,1′-bis(2,4-dioxo-butanoic acid ethylester) have been prepared by reaction of acetylferrocene or 1,1′-diacetylferrocene and diethyl oxalate. They yield neutral chelates with Cu^II, Ni^II, Zn^II, Co^II, and Mn^II. The acid dissociation constants of the ligands and the stability constants of their metal complexes including Fe^II complexes are reported. The structure of bis(1-ethoxycarbonyl-3-ferrocenyl-propane-1,3-dionato)copper(II) was determined by X-ray structure analysis. A cis arrangement with a nearly square planar coordination sphere at the Cu atom is found.     

Aminosulf(ox)ides as ligands for Iridium(I)-catalyzed asymmetric transfer hydrogenation

A new class of efficient catalysts was developed for the asymmetric transfer hydrogenation of unsymmetrical ketones. A series of chiral N,S-chelates (6-22) was synthesized to serve as ligands in the iridium(I)-catalyzed reduction of ketones. Both formic acid and 2-propanol proved to be suitable as hydrogen donors. Sulfoxidation of an (R)-cysteine-based aminosulfide provided a diastereomeric ligand family containing a chiral sulfur atom. The two chiral centers of these ligands showed a clear effect of chiral cooperativity. In addition, aminosulfides containing two asymmetric carbon atoms in the backbone were synthesized. Both the sulfoxide-containing beta-amino alcohols and the aminosulfides derived from 1,2-disubstituted amino alcohols gave rise to high reaction rates and moderate to excellent enantioselectivities in the reduction of various ketones. The enantioselective outcome of the reaction was favorably affected by selecting the most appropriate hydrogen donor. Enantioselectivities of up to 97% were reached in the reduction of aryl-alkyl ketones.     

Stability testing in an integrated scheme

ISO Guide 35 deals with RM stability issues and scrutinizes the evaluation of stability testing results under the assumption that either there is no trend at all (a rather rare situation), or any observed deterministic change is insignificant and thus can be neglected. However, market demands for reliable reference materials are obviously not limited to stable or at least seemingly stable materials. In many analytical applications, analytes and measurands under consideration are known, or at least suspected, to be unstable on time scales that may vary widely from measurand to measurand. The Federal Institute for Materials Research and Testing (BAM) has developed (and successfully uses) an integrated approach in its certification practice. The approach is based on an initial stability study and subsequent post-certification monitoring. Data evaluation is model-based and takes advantage of all information collected in the stability testing scheme(s). It thus allows one to deal with any kind of instability observed, to assess limiting time intervals at any stress condition in the range tested, to estimate a final expiry date for materials with detected instabilities or the maximum admissible re-testing interval for seemingly stable materials, and to assess maximum admissible stress loads during delivery of the material to the customer. The article describes (and exemplifies) typical study layout, the model selection, and the integrated data assessment.     

Water-soluble gold nanoparticles protected by fluorinated amphiphilic thiolates

The preparation and the properties of gold nanoparticles (Au NPs) protected by perfluorinated amphiphiles are described. The thiols were devised to form a perfluorinated region close to the gold surface and to have a hydrophilic portion in contact with the bulk solvent to impart solubility in water. The monolayer protected clusters were prepared, in an homogeneous phase using sodium thiolates because of the low nucleophilicity of the alpha-perfluorinated thiols, and fully characterized with (1)H, (19)F NMR spectrometry, IR and UV-vis absorption spectroscopies, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). Au NPs with core diameters ranging from 1.6 to 2.9 nm, depending on the reaction conditions, were obtained. Water-soluble NPs (MPC-F8-PEGs) were obtained with the thiol HS-F8-PEG ending with a short poly(ethylene glycol) unit (PEG-OMe 550), whereas thiols with shorter PEG chains give rise to NPs insoluble in water. MPC-F8-PEGs undergo an exchange reaction with amphiphilic alkyl thiols. ESR investigations, using a hydrophobic radical probe, indicate that the MPC-F8-PEG monolayer shows a greater hydrophobicity compared to the analogous hydrogenated monolayer.     

Synthesis of 2D Germanane (GeH): a New,Fast, and Facile Approach

Germanane (GeH), a germanium analogue of graphane, has recently attracted considerable interest because its remarkable combination of properties makes it an extremely suitable candidate to be used as 2D material for field effect devices, photovoltaics, and photocatalysis. Up to now, the synthesis of GeH has been conducted by substituting Ca by H in a β‐CaGe₂ layered Zintl phase through topochemical deintercalation in aqueous HCl. This reaction is generally slow and takes place over 6 to 14 days. The new and facile protocol presented here allows to synthesize GeH at room temperature in a significantly shorter time (a few minutes), which renders this method highly attractive for technological applications. The GeH produced with this method is highly pure and has a band gap (E_g) close to 1.4 eV, a lower value than that reported for germanane synthesized using HCl, which is promising for incorporation of GeH in solar cells.     

Influence of Initial pH Value on the Adsorption of Reactive Black 5 Dye on Powdered Activated Carbon: Kinetics,Mechanisms, and Thermodynamics

The aim of this work was to investigate the influence of initial pH value (pH₀) on the isothermal adsorption of Reactive Black 5 (RB5) dye on commercial powdered activated carbon. Four initial pH values were chosen for this experiment: pH₀ = 2.00, 4.00, 8.00, and 10.00. In order to investigate the mechanism of adsorption kinetic, studies have been performed using pseudo-first-order and pseudo-second-order kinetic models as well as an intraparticle diffusion model. In addition, thermodynamic parameters of adsorption were determined for pH₀ = 4.00. Results of this research showed that the initial pH value significantly influences the adsorption of RB5 dye onto activated carbon. The highest adsorption capacities (q_e) and efficiencies of decolouration were observed for initial pH values of pH₀ = 2.00 (q_e = 246.0 mg g⁻¹) and 10.00 (q_e = 239.1 mg g⁻¹) due to strong electrostatic interactions and attractive π···π interactions, respectively. It was also shown that the adsorption of RB5 dye on activated carbon at all initial pH values is kinetically controlled, assuming a pseudo-second-order model, and that intraparticle diffusion is not the only process that influences on the adsorption rate.     

C60 thin film growth on graphite: Coexistence of spherical and fractal-dendritic islands

The initial growth stage of C(60) thin film on graphite substrate has been investigated by scanning tunneling microscopy in ultrahigh vacuum at room temperature. The C(60) layer grows in a quasi-layer-by-layer mode and forms round, monolayer high islands on the graphite surface. The islands are confined by terraces on the graphite surface and the mobility of C(60) fullerenes across steps is low in all layers. The second and all subsequent layers adopt a fractal-dendritic shape, which was confirmed by calculating the fractal dimension (D=1.74 prior to island coalescence) and is in agreement with a diffusion limited aggregation. The profound differences between the growth of C(60) layers on graphite (first layer) and on C(60) surfaces (second and higher layers) are caused by the restriction of the C(60) mobility on the highly corrugated fullerene surfaces. The orientation of the fractal islands follows the hexagonal symmetry of the densely packed (111) surface of the fullerene lattice, which introduces a bias in the direction of molecule movement. The differences in surface topography on the nanoscale determine the mode of film growth in this van der Waals bonded system.     

Facile synthesis and relaxation properties of novel bispolyazamacrocyclic Gd3+ complexes: an attempt towards calcium-sensitive MRI contrast agents

Three novel GdDO3A-type bismacrocyclic complexes, conjugated to Ca (2+) chelating moieties like ethylenediaminetetraacetic acid and diethylenetriamine pentaacetic acid bisamides, were synthesized as potential "smart" magnetic resonance imaging contrast agents. Their sensitivity toward Ca (2+) was studied by relaxometric titrations. A maximum relaxivity increase of 15, 6, and 32% was observed upon Ca (2+) binding for Gd 2L (1), Gd 2L (2), and Gd 2L (3), respectively (L (1) = N, N-bis{1-[{[({1-[1,4,7-tris(carboxymethyl)-1,4,7,10-tetraazacyclododecane-10-yl]eth-2-yl}amino)carbonyl]methyl}-(carboxymethyl)amino]eth-2-yl}aminoacetic acid; L (2) = N, N-bis[1-({[({alpha-[1,4,7-tris(carboxymethyl)-1,4,7,10-tetraazacyclododecane-10-yl]- p-tolylamino}carbonyl)methyl]-(carboxymethyl)}amino)eth-2-yl]aminoacetic acid; L (3) = 1,2-bis[{[({1-[1,4,7-tris(carboxymethyl)-1,4,7,10-tetraazacyclododecane-10-yl]eth-2-yl}amino)carbonyl]methyl}(carboxymethyl)amino]ethane). The apparent association constants are log K A = 3.6 +/- 0.1 for Gd 2L (1) and log K A = 3.4 +/- 0.1 for Gd 2L (3). For the interaction between Mg (2+) and Gd 2L (1), log K A = 2.7 +/- 0.1 has been determined, while no relaxivity change was detected with Gd 2L (3). Luminescence lifetime measurements on the Eu (3+) complexes in the absence of Ca (2+) gave hydration numbers of q = 0.9 (Eu 2L (1)), 0.7 (Eu 2L (2)), and 1.3 (Eu 2L (3)). The parameters influencing proton relaxivity of the Gd (3+) complexes were assessed by a combined nuclear magnetic relaxation dispersion (NMRD) and (17)O NMR study. Water exchange is relatively slow on Gd 2L (1) and Gd 2L (2) ( k ex (298) = 0.5 and 0.8 x 10 (6) s (-1)), while it is faster on Gd 2L (3) (k ex (298) = 80 x 10 (6) s (-1)); in any case, it is not sensitive to the presence of Ca (2+). The rotational correlation time, tau R (298), differs for the three complexes and reflects their rigidity. Due to the benzene linker, the Gd 2L (2) complex is remarkably rigid, with a correspondingly high relaxivity despite the low hydration number ( r 1 = 10.2 mM (-1)s (-1) at 60 MHz, 298 K). On the basis of all available experimental data from luminescence, (17)O NMR, and NMRD studies on the Eu (3+) and Gd (3+) complexes of L (1) and L (3) in the absence and in the presence of Ca (2+), we conclude that the relaxivity increase observed upon Ca (2+) addition can be mainly ascribed to the increase in the hydration number, and, to a smaller extent, to the Ca (2+)-induced rigidification of the complex.