Experimental and theoretical study of the adsorption of fumaramide [2]rotaxane on Au(111) and Ag(111) surfaces

Thin films of fumaramide [2]rotaxane, a mechanically interlocked molecule composed of a macrocycle and a thread in a "bead and thread" configuration, were prepared by vapor deposition on both Ag(111) and Au(111) substrates. X-ray photoelectron spectroscopy (XPS) and high-resolution electron-energy-loss spectroscopy were used to characterize monolayer and bulklike multilayer films. XPS determination of the relative amounts of carbon, nitrogen, and oxygen indicates that the molecule adsorbs intact. On both metal surfaces, molecules in the first adsorbed layer show an additional component in the C 1s XPS line attributed to chemisorption via amide groups. Molecular-dynamics simulation indicates that the molecule orients two of its eight phenyl rings, one from the macrocycle and one from the thread, in a parallel bonding geometry with respect to the metal surfaces, leaving three amide groups very close to the substrate. In the case of fumaramide [2]rotaxane adsorption on Au(111), the presence of certain out-of-plane phenyl ring and Au-O vibrational modes points to such bonding and a preferential molecular orientation. The theoretical and experimental results imply that the three-dimensional intermolecular configuration permits chemisorption at low coverage to be driven by interactions between the three amide functions of fumaramide [2]rotaxane and the Ag(111) or Au(111) surface.     

Synthesis of 2D Germanane (GeH): a New,Fast, and Facile Approach

Germanane (GeH), a germanium analogue of graphane, has recently attracted considerable interest because its remarkable combination of properties makes it an extremely suitable candidate to be used as 2D material for field effect devices, photovoltaics, and photocatalysis. Up to now, the synthesis of GeH has been conducted by substituting Ca by H in a β‐CaGe₂ layered Zintl phase through topochemical deintercalation in aqueous HCl. This reaction is generally slow and takes place over 6 to 14 days. The new and facile protocol presented here allows to synthesize GeH at room temperature in a significantly shorter time (a few minutes), which renders this method highly attractive for technological applications. The GeH produced with this method is highly pure and has a band gap (E_g) close to 1.4 eV, a lower value than that reported for germanane synthesized using HCl, which is promising for incorporation of GeH in solar cells.     

1-Ethoxycarbonyl-3-ferrocenyl-propan-1,3-dion und Ferrocen-1,1'bis(2,4-dioxobutansäureethylester) als Liganden für Übergangsmetallionen. Kristallstruktur von Bis(1-ethoxycarbonyl-3-ferrocenyl-propan-1,3dionato)kupfer(II)

1-Ethoxycarbonyl-3-ferrocenyl-propane-1,3-dion and Ferrocene-1,1′bis(2,4-dioxobutanoic acid ethylester) as Ligands for Transition Metal Ions. Crystal Structure of Bis(1-ethoxycarbonyl-3-ferrocenyl-propane-1,3dionato)copper(II) The ligands 1-ethoxycarbonyl-3-ferrocenyl-propane-1,3-dion and ferrocene-1,1′-bis(2,4-dioxo-butanoic acid ethylester) have been prepared by reaction of acetylferrocene or 1,1′-diacetylferrocene and diethyl oxalate. They yield neutral chelates with Cu^II, Ni^II, Zn^II, Co^II, and Mn^II. The acid dissociation constants of the ligands and the stability constants of their metal complexes including Fe^II complexes are reported. The structure of bis(1-ethoxycarbonyl-3-ferrocenyl-propane-1,3-dionato)copper(II) was determined by X-ray structure analysis. A cis arrangement with a nearly square planar coordination sphere at the Cu atom is found.     

A Universal Cassette-Based System for the Dissolution of Solid Targets

Cyclotron-based radionuclides production by using solid targets has become important in the last years due to the growing demand of radiometals, e.g., ⁶⁸Ga, ⁸⁹Zr, ^43/47Sc, and ^52/54Mn. This shifted the focus on solid target management, where the first fundamental step of the radiochemical processing is the target dissolution. Currently, this step is generally performed with commercial or home-made modules separated from the following purification/radiolabelling modules. The aim of this work is the realization of a flexible solid target dissolution system to be easily installed on commercial cassette-based synthesis modules. This would offer a complete target processing and radiopharmaceutical synthesis performable in a single module continuously. The presented solid target dissolution system concept relies on an open-bottomed vial positioned upon a target coin. In particular, the idea is to use the movement mechanism of a syringe pump to position the vial up and down on the target, and to exploit the heater/cooler reactor of the module as a target holder. All the steps can be remotely controlled and are incorporated in the cassette manifold together with the purification and radiolabelling steps. The performance of the device was tested by processing three different irradiated targets under different dissolution conditions.     

Extending the nitrogen-heterosuperbenzene family: the spectroscopic, redox, and photophysical properties of "half-cyclized" N-1/2HSB and Its Ru(II) complex

Oxidative cyclodehydrogenation is an important process in the formation of the new graphene, N-(1)/(2)HSB 2. This heteropolyaromatic results from the FeCl(3)-catalyzed oxidative cyclodehydrogenation of 1,2-dipyrimidyl-3,4,5,6-tetra-(4-tert-butylphenyl)benzene. Three new C-C bonds are formed that lock the two pyrimidines in a molecular platform comprising eight fused aromatic rings flanked by two remaining "uncyclized" phenyl rings. Mechanistically intriguing is the fact that N-HSB 1, the product of six C-C bond fusions, is co-synthesized with its "half-cyclized" daughter in this reaction. 1 and 2 have the same bidentate N-atom arrangement. This facilitates formation of the heteroleptic Ru(II) complexes, [Ru(bpy)(2)(2)](PF(6))(2) 4 and [Ru(bpy)(2)(1)](PF(6))(2) 3, which differ in the size and planarity of their aromatic ligands. The new ligand 2 and its complex 4 are characterized by (1)H NMR, IR, ESI-MS, and accurate mass methods. 2 exhibits photophysical properties that are consistent with a reduction of the pi/pi framework, a concomitant increase in the energy of the LUMO, and a blue-shift of the solvent-dependent fluorescence (lambda(em) = 474 nm, phi(F) = 0.55, toluene) as compared to its parent. Complex 4 absorbs throughout the visible region and borders on near-IR emitter character, exhibiting a slightly blue-shifted (3)MLCT emission (868 nm, CH(3)CN) as compared to that of [Ru(bpy)(2)(1)](PF(6))(2) 3 (880 nm, CH(3)CN). Electrochemical analyses permit further elucidation of the intermolecular interactions of 3 and 4. These and the concentration and temperature-dependent NMR spectra of 4 confirm it to be nonaggregating, a direct result of the two uncyclized and rotatable phenyl rings in 2.     

Thermal analysis of polyaniline poly(N-vinylpyrrolidone)-stabilized dispersions

The polyaniline dispersions stabilized with poly(N-vinylpyrrolidone) (PANI/PVP) were synthesized by oxidative polymerization with different mass ratios of PANI and PVP and different molar concentrations of the components in the polymerization mixture. The composite powders prepared from colloidal PANI/PVP dispersions were characterized by thermogravimetry and differential thermal analysis. The change in the ratio of PANI and PVP as well as the starting molar concentrations of aniline hydrochloride and oxidant has influence on the resulting properties of the dispersions. Concerning the doping, the results show that PANI/PVP powders are stable up to approximately 160 °C. Degradation of polymer chains starts at temperatures above 250 °C. The PANI/PVP composite powders with lower content of PANI exhibit slightly higher thermal stability. Further, colloidal PANI/PVP dispersions were screen-printed on aluminum foil for infrared spectroscopic characterization and on poly(ethylene terephthalate) foil for electrical measurements. The sheet resistance of printed layers measured by two-point probe was of the order of tens to thousands of kΩ sq^?1. The influence of both the change in the composition and the drying temperature is discussed.     

On the application of ICP-MS techniques for measuring uranium and plutonium: a Nordic inter-laboratory comparison exercise

Inductively coupled plasma mass spectrometry (ICP-MS) techniques are widely used for determination of long-lived radionuclides and their isotopic ratios in the nuclear fields. Uranium (U) and Plutonium (Pu) isotopes have been determined by many researchers with ICP-MS due to its relatively high sensitivity and short measurement time. In this work, an inter-laboratory comparison exercise among the Nordic countries was performed, focusing on the measurement of U and Pu isotopes in certified reference materials by ICP-MS. The performance and characters of different ICP-MS instruments are evaluated and discussed in this paper.     

Polyaniline/montmorillonite nanocomposite thin layers deposited on different substrates

Preparation method of polyaniline/montmorillonite (PANI/MMT) nanocomposite in the form of thin layer deposited on various substrates is optimized in this work to obtain high electrical conductivity. Simple method (i.e. polymerization of anilinium sulfate in the presence of MMT) has been used for the preparation and following four conditions were varied: preparation temperature (T = 10 or 20 °C), preparation time (t = 4 or 6 h), size fraction of MMT (p < 1 or 5 µm), and type of substrate (microscope glass slides, silica glass slides, polyester foils). Therefore, 24 samples were prepared, characterized and their electrical conductivity was compared. Raman spectroscopy and scanning electron microscopy were used for the characterization of the structure of samples. Thickness of layers was measured using atomic force microscopy. Based on the comparison of samples and with respect to the aim of obtaining high electrical conductivity, it was found that the most suitable substrate is polyester foil and preparation conditions are T = 20 °C, t = 6 h, p < 5 µm. To obtain highly conductive layers on glass substrates (although less conductive than layers on foil), preparation time have to be shortened to 4 h.