Thermal investigation of PEG 4000 — oxazepam binary system

A thermal study using DSC and Hot Stage Microscopy (HSM) was carried out to investigate the interaction in solid state of the binary system PEG 4000 — oxazepam, and to establish their phase diagram. The eutectic composition, which melting occurs at lower temperature as compared with the pure components, has been determined. The results obtained by DSC and HSM have indicated that PEG 4000 — oxazepam mixtures displays no obvious incompatibilities, and that the system shows a typical eutectic behaviour. However because of the closeness of the melting of PEG 4000 to the eutectic temperature, it was difficult to determine precisely the eutectic composition and temperature on the basis of DSC measurements alone. The use of heats of fusion corresponding to physical mixtures allowed an estimation of the eutectic composition at 6% w/w oxazepam. Additional information of temperature (57.6C) and composition (5–10% w/w oxazepam) of the eutectic was obtained by HSM using the contact method. This low melting temperature in this range of compositions offers advantages in terms of drug stability and easy manufacture.     

Mercury Speciation in Fish by High-Performance Liquid Chromatography (HPLC) and Post-Column Ultraviolet (UV)-Photochemical Vapor Generation (PVG): Comparison of Conventional Line-Source and High-Resolution Continuum Source (HR-CS) Atomic Absorption Spectrometry (AAS)

An ultraviolet-photochemical generator (UV-PVG) capable of post-column on-line transformation of both organic and inorganic mercury species to cold vapor (Hg⁰) with subsequent detection by quartz tube-atomic absorption spectrometry (QT-AAS) was developed. Mercury(II), methylmercury(I), ethylmercury(I), and phenylmercury(I) were successfully detected after separation by reversed-phase high-performance liquid chromatography (RP-HPLC). Two types of AAS detectors were compared. The first was a commonly used line-source instrument while the second was a high-resolution continuum source (HR-CS) AAS. The latter provided better limits of detection: 0.47?µg?L^?1 for Hg(II), 0.84?µg?L^?1 for methylmercury(I), 0.80?µg?L^?1 for ethylmercury(I), and 2.0?µg?L^?1 for phenylmercury(I). The repeatability at 30?μg?L^?1 was 3.6%, 4.1%, 6.2%, and 4.5% for these species (n?=?10). These figures of merit were comparable with those reported for more sensitive atomic fluorescence spectrometry. Nine sample extraction procedures were investigated. Extraction by tetramethylammonium hydroxide and HCl at 75?°C was selected as the only method compatible with the proposed separation and detection steps providing high extraction efficiency and no changes in mercury speciation. The applicability of the proposed high-performance liquid chromatography–ultraviolet-photochemical vapor generation–quartz tube-atomic absorption spectrometry method was demonstrated using fish samples and certified reference materials (CRM) DOLT-4 (dogfish liver) and ERM-CE464 (tuna fish). The results were comparable to those obtained by a reference method based on L-cysteine extraction and high-performance liquid chromatography–inductively coupled plasma-mass spectrometry (HPLC–ICP-MS) determination.     

Evaluation of the redox properties and anti/pro-oxidant effects of selected flavonoids by means of a DNA-based electrochemical biosensor

Quercetin and rutin as well as catechin and epigallocatechin gallate were investigated, as widely distributed representatives of flavonols and flavanols, respectively, regarding their anti/pro-oxidant properties. The flavonoids are irreversibly oxidized at a dsDNA-modified screen-printed electrode within 0.368 to 0.449 V vs. SHE without binding to DNA. Using the DNA biosensor the detection scheme of a DNA prevention/degradation exploits the [Co(phen)(3)](3+) complex as an electrochemical DNA marker. Antioxidant activity of flavonoids was tested in a model cleavage mixture composed of 5 x 10(-7) mol L(-1) [Cu(phen)(2)](2+) as the catalyst, 1 x 10(-3) mol L(-1) ascorbic acid as the chemical reductant and atmospheric oxygen as the natural oxidant where reactive oxygen radicals are generated. The antioxidant activity increases with the concentration of flavonoids reaching a maximum where pro-oxidative behaviour becomes of importance. The pro-oxidant potency of flavonoids depends on the presence of atmospheric oxygen and follows the order quercetin>rutin>epigallocatechin gallate>catechin.     

Xylanase production by Trichoderma reesei rut C-30 on rice straw

Xylanase production of Trichoderma reesei Rut C-30 was examined at different initial pH values (4.8, 5.9, and 7.0) on rice straw in shake flasks, and in a fermentor, for the best pH condition. Enzyme performance was tested on ammonia-treated dwarf elephant grass. The maximum xylanase activities, 92 and 122 IU/mL, were obtained at pH 4.8 in the shake flasks and fermentor, respectively, in which good growth of the fungus was observed during the first 24 h and consumption of proteins dissolved from the rice straw caused the pH to rise later to values between 6.4 and 6.7 (optimal for xylanase production). The xylanases from T. reesei were as effective as Multifect XL, a commercial enzyme preparation, in hydrolyzing ammonia-treated elephant grass.     

Determination of trace metals in industrial boron carbide by solid sampling optical emission spectrometry. Optimization of DC arc excitation (current, atmosphere and chemical modifier)

Graphite arc emission spectrometry has become possible as a result of the invention of novel types of optical spectrometers with Echelle-optics and semiconductor array detectors, and by the application of electronically controlled, high current arc generators. An optimization of the excitation parameters to boron carbide analysis is reported here, measuring background corrected line intensities that were integrated for the time of total evaporation of 5 mg boron carbide sample with or without added chemical modifiers. The following set of experimental conditions were compared with respect of analytical sensitivity and precision: (A) no modifier, Ar + O₂ (20%), 16 A; (B) sample + graphite powder (1 + 1), Ar + O₂ (20%), 16 A; (C) sample + CaF₂ (1 + 1), Ar, 25 A; (D) sample + CaF₂ + graphite powder (1 + 1 + 1), Ar, 25 A. The graphite powder modifier resulted in improved precision in general, and the CaF₂ was effective as a plasma ionization buffer and fluorinating agent. The best compromise was found under conditions B, when oxygen was present in the discharge atmosphere. This is likely due to the stepwise conversion of the boron carbide matrix to the more volatile boron oxide. Under conditions B, detection limits in the ranges of 0.3–9 μg g⁻¹ for Al, Ca, Cr, Cu, Fe, Mg, Mn and Si and that of 18–38 μg g⁻¹ for Ti, W, and Zr were attained. Average RSDs of 10.2 and 9.7% were found, respectively, without and with internal referencing to boron.     

Indirect atomic absorption spectrometric determination of perchlorate by liquid-liquid extraction in a flow-injection system

The determination is based on the continuous liquid-liquid extraction of the copper(I)/6-methylpicolinealdehyde azine/perchlorate ion-pair into 4-methyl-2-pentanone in a flow-injection manifold. The organic fills a loop of an injector situated in an integrated feed system of an atomic absorption spectrometer. Measurement of the copper atomic absorption signal from the organic phase allows the indirect determination of 0.5–5 μg ml^?1 perchlorate, giving a 3-fold increase in sensitivity over the conventional spectrophotometric method. The detection limit is 70 ng ml^?1. The sampling frequency is 45 ± 5 h^?1. The method is highly selective, and has been used for the determination of perchlorate added to serum and urine samples.     

Cycloaddition reactions of 1.3-benzothiazines v synthesis of new tetracyclic ring systems

New tetracyclic derivatives (3a,$\text{b}$, 5, 8) similar to protoberberines, but containing a lactam structural element and other hetero atoms besides the bridge-head nitrogen in rings B and C, were prepared by cycloaddition of 6,7-dimethoxy-2H-1,3-benzothiazine (1a) with $\text{o}$-substituted aromatic carboxylic acid derivatives (2a,$\text{b}$, 4) and from 4- methyl-6,7-dimethoxy-2$\text{H}$-1,3-benzothiazine (1b) with 3.5-dinitrobenzoyl chloride.     

Online preconcentration system for determining ultratrace amounts of Cd in vegetal samples using thermospray flame furnace atomic absorption spectrometry

A system has been developed for online preconcentration and determination of Cd using thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS). It is based on the solid-phase extraction of Cd in an Amberlite XAD-2 minicolumn loaded with 2-(2-thiazolylazo)-5-dimethylaminophenol (TAM), and the metal ion is eluted with 1 mol L⁻¹ hydrochloridric acid, followed by its determination. The online system allows determining Cd with a detection limit of 8.0 ng L⁻¹ and a quantification limit of 25.0 ng L⁻¹. The precision (repeatability), calculated as the relative standard deviation (% RSD) in sample solutions containing 0.5 and 3.0 μg L⁻¹ of Cd, was 6.1 and 4.5%, respectively. The preconcentration factor obtained was 24. The system’s accuracy was confirmed by analyzing the following certified reference materials (CRMs): Rice flour NIES 10b, Apple leaves NIST 1515 and Orchard leaves NBS 1571. This procedure was applied to the determination of Cd in cabbage and powdered guarana samples.     

Capillary electrophoresis separation of vinpocetine and related compounds: prediction of electrophoretic mobilities in partly aqueous media

Offord's equation, a relationship between electrophoretic mobility and charge, size and shape of peptides, has been extended to quantitate the electrophoretic mobility of vinca alkaloids. Partly aqueous protonation constants and the derived theoretical mobilities have been proven to be able to predict experimental electrophoretic mobilities. In practice, seven vincamine derivatives of very low water-solubility were separated by capillary electrophoresis. Buffer total concentration, apparent pH and methanol content, the three most important parameters of the running buffer, were used in triangular resolution mapping to characterize separation. Even though electrophoresis is well known to slow down in partly aqueous media, under our optimized circumstances a baseline separation was achieved within 8 min in each case.     

Effect of film thickness on the electro-reduction of molecular oxygen on electropolymerized cobalt tetra-aminophthalocyanine films

We studied the electrocatalytic activity of cobalt tetra-aminophthalocyanine (CoTAPc) for the reduction of molecular oxygen (O₂) on adsorbed monomeric and on electropolymerized films of different thicknesses on glassy carbon (GC) electrode. The polymeric films, denoted poly-CoTAPc, were first characterized by electrochemical impedance spectroscopy and it appears that the types of phenomena revealed to be occurring depend less on the film thickness in basic than in acid media. For O₂ reduction, the results showed that poly-CoTAPc is more active than the monomeric CoTAPc adsorbed on GC. Indeed, rotating ring-disk electrode data showed that polymeric CoTAPc promotes the four-electron reduction of O₂ to water in parallel to a two-electron reduction to give peroxide. On monomeric and thin films of poly-CoTAPc, a two-electron reduction mechanism predominates. In basic media the activity increases very slightly with thickness, whereas in acid media this increase is more pronounced. This parallels the observed behavior revealed by electrochemical impedance spectroscopy.