Effect of vibrational excitation of HBr on the H+HBr abstraction and exchange reactions

The effect of vibrational excitation of HBr on the H+HBrH₂+Br and H+HBrH+HBr reactions has been investigated on the extended LEPS surface (ELEPS) constructed on the basis of quantum chemically calculated points of PES. Together with this surface the LEPS surface of Sudhakaran and Raff [1] was used for comparison at two relative translational energies. A quasiclassical trajectory method was used to study the abstraction and exchange reaction dynamics. The reactive cross section was calculated as a function of the relative collision energy and the vibrational state of HBr. The following conclusions can be drawn from the results of the study: (i) vibrational excitation v=0 v=2 more than doubles the reaction cross section, (ii) the increase in the collision energy is most effectively channelled into the product translational energy.Dedicated to Professor J. Koutecký on the occasion of his 65th birthday     

Sol-Gel Fabrication and Properties of Silica Cores of Optical Fibers Doped with Yb3+, Er3+, Al2 O3 or TiO2

Optical cores of preforms for drawing optical fibers doped with Er3+ and Yb3+ were fabricated by the sol-gel method with the aim of increasing the thickness of glass layers coated in a single coating cycle and to determine the relation between the preparation conditions and optical properties of the fibers. Al2O3-P2O5-SiO2 and TiO2-P2O5-SiO2 glasses have been studied as matrices for entrapping the rare-earth elements. Input sols have been prepared from silicon and titanium alkoxides, AlCl3, ErCl3, YbCl3, POCl3, water and a modifier under acidic catalysis of HCl. The sols were coated on the inner wall of a silica substrate tube and the gel layers were sintered at high temperatures up to 2000°C after which the tube was collapsed into the preform. Continuous and homogenous glass films with the maximum thickness of about 8 m were fabricated. The influence of high-temperature heat treatment of the layers on their composition and optical attenuation was observed. The amplified stimulated emission of Er3+ around 1.55 m was measured under the excitation of the fibers by an Nd : YAG laser at 1.064 m.     

Phase Equilibria in the Ni–Al–W System at 900°C

Multicomponent Ni-base alloys exhibit good mechanical properties even at elevated temperatures and they are widely used for industrial production of exertion-resistive parts of engines. These properties are mainly determined by the coexistence of a disordered γ matrix with a face centred cubic lattice and cuboidal domains of its ordered γ′ structure. Therefore it is useful to study phase equilibria in Ni-base systems, namely in the regions involving both mentioned phases. One of the conclusions of our recent work on Ni–Al–Cr–W system was a necessity of modification of selected thermodynamic parameters of the ternary Ni–Al–W subsystem in order to achieve a better agreement of our experimental observations with theoretical modelling. This involves new measurements of the microstructure of selected samples of the Ni–Al–W system at 900°C and the comparison of the results with existing literature data in order to confirm our conclusions on higher order system investigated before. It is a first step on the way to an assessment of the Ni–Al–W system, which has not been done before.     

Photostabilizing activity of sterically hindered piperidines—II: Radical trapping ability

The abilities of both 2,2,6,6-tetramethylpiperidine (I) and its nitroxyl (II) to trap radicals involved in hydrocarbon photo-oxidations have been studied in cumene and 1,3,5-trimethylcyclohexane at 27° using AIBN, hydroperoxide and dialkylperoxide as initiators: the light was either the band 300–400 nm or 366 nm. Under conditions of photolysis of ROOH (degenerate branching), I is oxidized to II. II is capable of trapping R' radicals, the rate constant being ～50 times lower than that for RO^.₂ formation. RO^.₂ radicals react with neither I nor II. Under the condition of degenerate branching, II is capable of intercepting the radical fragments from decomposing hydroperoxide. The rate constant of this process is ～500 times higher than that for hydrogen abstraction by these fragments. A reaction mechanism is suggested: hydrogen bonded associates formed between an N-containing stabilizer and ROOH play a dominant role. The principal intermediates in this mechanism are represented by >NO^., >NOH and >NOR species.     

Untersuchung der kinetik von azokupplungs-reaktionen mittels direkter injektions-enthalpiemetrie

The present paper deals with the application of direct injection enthalpimetry (DIE) in the study of the kinetics of azo coupling reactions. On the example of the coupling of diazotized aniline-4-sulphonic acid with 1,8-dihydroxynaphthalene-3,6-disulphonic acid, it was verified that the rate constants determined using DIE are comparable with those determined using spectrophotometry. Advantages result from the application of DIE in the study of the kinetics of azo coupling reactions.     

The immunosensors for measurement of 2,4-dichlorophenoxyacetic acid based on electrochemical impedance spectroscopy

Electrochemical impedance spectroscopy (EIS) was evaluated for the direct determination of herbicide 2,4-dichlorophenoxyacetic acid (2,4-D). Specific antibody against 2,4-D was immobilised onto different gold electrodes. Several methods of antibody immobilisation by covalent linkage to modified surface were studied. Self-assembled monolayers formed using thiocompounds as cystamine, 4-aminothiophenol (ATPh), 3,3'-dithiopropionic acid di-(N-succinimidyl ester) (DTSP) and 11-mercaptoundecanoic acid (MUA) were chosen for the sensing surface activation. Three different sensor types were tested: screen-printed disc and finger-like structures and interdigitated array (IDA) electrodes produced by lithography. The measurements were carried out in a stationary arrangement, and the reaction between hapten and the immobilised antibody was observed online. Changes of impedance parameters were evaluated, and the best immobilisation technique (using 4-aminothiophenol) was chosen for further measurements. Impedance changes due to immunocomplex formation were evaluated, and the possibility of direct monitoring of 2,4-D binding to the antibody was demonstrated at a fixed frequency. For the strip sensor, the calibration curves were constructed in concentration range from 45 nmol l(-1) to 0.45 mmol l(-1) of 2,4-D.     

Square-Planar Nickel(II) O,O′-Dialkyldithiophosphato Complexes with Triphenylphosphine of the Type [NiX(S2P{OR}2)(PPh3)] (X = Cl,Br, I and NCS)

A series of new [NiX(S₂P{O-c-Hex}₂)(PPh₃)](X = Cl^–, Br^–, I^– and NCS^–)(1)–(4) and [Ni(NCS)(S₂P{OR}₂)(PPh₃)][R =n-Pr (5), i-Pr (6)] complexes has been synthesized and characterized by elemental analyses, f.i.r., i.r., u.v.–vis., ¹H-, ¹³C{¹H}- and ³¹P{¹H}-n.m.r. spectra, magnetochemical and conductivity measurements. A single crystal X-ray analysis of [Ni(NCS)(S₂P{O-n-Pr}₂)(PPh₃)](5) reveals the molecular structure of the complex and confirms a square-planar geometry around the central atom of nickel with the NCS anion coordinated via the nitrogen atom.     

A top-down approach to protein structure studies using chemical cross-linking and Fourier transform mass spectrometry

In a preliminary communication we described a top-down approach to the determination of chemical cross-link location in proteins using Fourier transform mass spectrometry (FT-MS). We have since extended the approach to use a series of homobifunctional cross-linkers with the same reactive functional groups, but different cross-linker arm lengths. Correlating cross-linking data across a series of related linkers allows the distance constraint derived from a cross-link between two reactive side chains to be determined more accurately and increases the confidence in the assignment of the cross-links. In ubiquitin, there are seven lysines with primary amino groups and the amino terminus. Disuccinimidyl suberate (DSS, cross-linker arm length = 11.4 A), disuccinimidyl glutarate (DSG, cross-linker arm length = 7.5 A) and disuccinimidyl tartrate (DST, cross- linker arm length = 5.8 A) are homobifunctional cross-linking reagents that react specifically with primary amines. Using tandem mass spectrometry (MS/MS) on the singly, internally cross-linked precursor ion of ubiquitin, we found cross-links with DSS and DSG between the amino terminus and Lys 6, between Lys 6 and Lys 11, and between Lys 63 and Lys 48. Using disuccinimidyl tartrate (DST), the shortest cross-linker in the series, only the cross-links between the amino terminus and Lys 6, and between Lys 6 and Lys 11 were observed. The observed cross-links are consistent with the crystal structure of ubiquitin, if the lysine side chains and the amino terminus are assumed to have considerable flexibility. In a separate study, we probed the reactivity of the primary amino groups in ubiquitin using the amino acetylating reagent, N-hydroxy succinimidyl acetate (NHSAc), and a top-down approach to localize the acetylated lysine residues. The reactivity order obtained in that study (M1 approximate, equals K6 approximate, equals K48 approximate, equals K63) > K33 > K11 > (K27, K29), shows that the cross-link first formed in ubiquitin by reaction with DSS and DSG occurs between the most reactive residues.     

Rhodium(I) complexes with 1′-(diphenylphosphino)ferrocenecarboxylic acid as active and recyclable catalysts for 1-hexene hydroformylation

The rhodium complex trans-[Rh(CO)(Hdpf-κP)(dpf-κ²O,P)] (1), (Hdpf = 1′-(diphenylphosphino)ferrocenecarboxylic acid) was used as an efficient and recyclable catalyst for 1-hexene hydroformylation producing ca. 80% of aldehydes at 10 atm CO/H₂ and 80 °C. After the reaction, unchanged complex 1 was separated from the reaction mixture and used again three times with the same catalytic activity. The effect of modifying ligands, phosphines and phosphites, on the reactivity of 1 was investigated. The active catalytic systems containing 1 or trans-[Rh(CO)(L)(dpf-κ²O,P)] (2) were formed in situ from acetylacetonato rhodium(I) precursors [Rh(CO)₂(acac)] (3) or [RhL(CO)(acac)] (4) and Hdpf or Medpf (L = phosphine, Medpf = methyl ester of Hdpf).     

Surface patterns of block copolymers in thin layers after vapor treatment

A systematic study of formation of surface patterns in block copolymer thin layers after their exposure to solvent vapors was performed. The studied effect involves layers of thickness approximately equal to the ordering size of polymers - about 45 nm. Experiments were performed on three styrene - methacrylate derivative block copolymers, synthesized by living anionic polymerization: poly(4-octylstyrene)-block-poly(butyl methacrylate), poly(4-fluorostyrene)-block-poly(butyl methacrylate) and poly(p-octylstyrene)-block-poly(methyl methacrylate). The polymers were exposed to vapors of chloroform, 1,4-dioxane, hexane, acetone and tetrahydrofuran.