Carbon-nanotube-based saturable absorbers for near infrared solid state lasers

We demonstrate the passive mode-locking of a diode-pumped Nd⁺³:YAG (central wavelength: 1.32 μm; pulse duration: 50 ps; output energy: up to 70 μJ) laser using a polymer film containing single-wall carbon nanotubes. The mode-locking regime is stable at a pump repetition rate of up to 1 kHz. We also investigate the temporal evolution of the light-induced absorption change of the polymer film containing carbon nanotubes in the spectral range of 1.3–1.5 μm by femtosecond time-resolved pump-probe measurements. The measurements reveal that light-induced transmission exhibits fast and slow components that last 280 fs and more than 10 ps, respectively. The third-order susceptibility of the polymer film containing single wall carbon nanotubes is as high as 10⁻¹¹ esu.     

Self-consistent treatment of the Anderson model

TheN-fold degenerate Anderson single impurity model in the infiniteU limit is treated by means of the irreducible Green functions method. In this approach a derivation of an exact Dyson equation and an exact self-energy operator is possible. The necessity of introducing auxiliary fields, such as slave-bosons is avoided.     

Impact of silica environment on hyperfine interactions in 𝜖-Fe2O3 nanoparticles

Magnetic nanoparticles have found broad applications in medicine, especially for cell targeting and transport, and as contrast agents in MRI. Our samples of ??-Fe₂O₃ nanoparticles were prepared by annealing in silica matrix, which was leached off and the bare particles were then coated with amorphous silica layers of various thicknesses. The distribution of particle sizes was determined from the TEM pictures giving the average size ～20 nm and the thickness of silica coating ～5; 8; 12; 19 nm. The particles were further characterized by the XRPD and DC magnetic measurements. The nanoparticles consisted mainly of ??-Fe₂O₃ with admixtures of ～1 % of the α phase and less than 1 % of the γ phase. The hysteresis loops displayed coercivities of ～2 T at room temperature. The parameters of hyperfine interactions were derived from transmission Mössbauer spectra. Observed differences of hyperfine fields for nanoparticles in the matrix and the bare ones are ascribed to strains produced during cooling of the composite. This interpretation is supported by slight changes of their lattice parameters and increase of the elementary cell volume deduced from XRD. The temperature dependence of the magnetization indicated a two-step magnetic transition of the ??-Fe₂O₃ nanoparticles spread between ～85 K and ～150 K, which is slightly modified by remanent tensile stresses in the case of nanoparticles in the matrix. The subsequent coating of the bare particles by silica produced no further change in hyperfine parameters, which indicates that this procedure does not modify magnetic properties of nanoparticles.     

Parallel MRI at microtesla fields

Parallel imaging techniques have been widely used in high-field magnetic resonance imaging (MRI). Multiple receiver coils have been shown to improve image quality and allow accelerated image acquisition. Magnetic resonance imaging at ultra-low fields (ULF MRI) is a new imaging approach that uses SQUID (superconducting quantum interference device) sensors to measure the spatially encoded precession of pre-polarized nuclear spin populations at microtesla-range measurement fields. In this work, parallel imaging at microtesla fields is systematically studied for the first time. A seven-channel SQUID system, designed for both ULF MRI and magnetoencephalography (MEG), is used to acquire 3D images of a human hand, as well as 2D images of a large water phantom. The imaging is performed at 46 mu T measurement field with pre-polarization at 40 mT. It is shown how the use of seven channels increases imaging field of view and improves signal-to-noise ratio for the hand images. A simple procedure for approximate correction of concomitant gradient artifacts is described. Noise propagation is analyzed experimentally, and the main source of correlated noise is identified. Accelerated imaging based on one-dimensional undersampling and 1D SENSE (sensitivity encoding) image reconstruction is studied in the case of the 2D phantom. Actual threefold imaging acceleration in comparison to single-average fully encoded Fourier imaging is demonstrated. These results show that parallel imaging methods are efficient in ULF MRI, and that imaging performance of SQUID-based instruments improves substantially as the number of channels is increased.     

Pulsed laser treatment of gold and black gold thin films fabricated by thermal evaporation

The effect of pulsed laser treatment of metal, and metal blacks, was studied. Gold and black gold thin films were fabricated by thermal evaporation of gold in a vacuum and nitrogen atmosphere respectively. Black gold films were grown in a nitrogen atmosphere at pressures of 200 Pa and 300 Pa. UV pulsed laser radiation (λ = 266 nm, τ = 4 ns), with fluence ranging from 1 mJ·cm⁻² to 250 mJ·cm⁻² was used for the film treatment in a vacuum and nitrogen atmosphere. The nitrogen pressure was varied up to 100 kPa. Surface structure modifications were analyzed by optical microscopy, atomic force microscopy (AFM) and scanning electron microscopy (SEM). Energy dispersive X-ray spectroscopy (EDX) was used for chemical characterization of the samples. A significant dependence of the film optical and structural properties on laser treatment conditions (laser fluence, ambient pressure and number of applied pulses) was found. The threshold for observable damage and initiation of changes of morphology for gold and black gold surfaces was determined. Distinct modifications were observed for fluences greater than 106 mJ·cm⁻² and 3.5 mJ·cm⁻² for the gold and black gold films respectively. Absorbtivity of the black gold film is found to decrease with an increase in the number of laser pulses. Microstructural and nanostructural modifications after laser treatment of the black gold film were observed. EDX analysis revealed that no impurities were introduced into the samples during both the deposition and laser treatment.      

Birefringence dispersion in a quartz crystal retrieved from a channeled spectrum resolved by a fiber-optic spectrometer

We present a simple method for measuring the wavelength dependence of both the phase and group birefringences in a quartz crystal of known thickness. The method utilizes interference of polarized waves resolved by a fiber-optic spectrometer as a channeled spectrum (spectral fringes). The fringe order versus the precise position of the interference maximum in the spectrum is fitted to the approximate function, from which the phase birefringence as a function of wavelength is retrieved. We also determine the group birefringence dispersion. The functions measured in a range from 500 to 900 nm are compared with those resulting from the available dispersion relation, and very good agreement is confirmed.     

Yang-Mills Detour Complexes and Conformal Geometry

Working over a pseudo-Riemannian manifold, for each vector bundle with connection we construct a sequence of three differential operators which is a complex (termed a Yang-Mills detour complex) if and only if the connection satisfies the full Yang-Mills equations. A special case is a complex controlling the deformation theory of Yang-Mills connections. In the case of Riemannian signature the complex is elliptic. If the connection respects a metric on the bundle then the complex is formally self-adjoint. In dimension 4 the complex is conformally invariant and generalises, to the full Yang-Mills setting, the composition of (two operator) Yang-Mills complexes for (anti-)self-dual Yang-Mills connections. Via a prolonged system and tractor connection a diagram of differential operators is constructed which, when commutative, generates differential complexes of natural operators from the Yang-Mills detour complex. In dimension 4 this construction is conformally invariant and is used to yield two new sequences of conformal operators which are complexes if and only if the Bach tensor vanishes everywhere. In Riemannian signature these complexes are elliptic. In one case the first operator is the twistor operator and in the other sequence it is the operator for Einstein scales. The sequences are detour sequences associated to certain Bernstein-Gelfand-Gelfand sequences.     

The SO(3,3) group as a common basis for Dirac's and Proca's equations

Dirac's and Proca's equations are unified in the sense that the algebras of Dirac -matrices and Duffin-Kemmer-matrices are shown to furnish two distinct matrix representations of the Lie algebra of the SO(3,3)-group. This fact is then interpreted as evidence for the classical picture of particles described by the above-mentioned equations to be a relativistic top. It is also argued that the shape of the top is rod-like.     

On the bootstrap effect in large tokamaks with lower hybrid driven current

The amplification of lower hybrid (LH) driven current of various profiles has been found. The results strongly depend on the plasma temperature profile, on the LH current profile, and on the magnitude of the particle diffusion flux.This work was started during the visit of the author in the I. V. Kurchatov Institute of Atomic Energy, Moscow. The author thanks IAE for hospitality, and V. Parail, G. V. Pereverzev, A. Smoljakov and R. Klíma for many useful and critical discussions.