Novel poly(lactic acid)–poly(ethylene oxide) chain‐linked copolymer and its application in nano‐encapsulation

The work presented here investigates the synthesis of poly(lactic acid)–poly(ethylene oxide) diisocyanate chain‐linked copolymer, and its application in the nano‐encapsulation of bioactive compounds. Study was conducted on the effect of the type of chain‐linking agent, along with molecular weight, thermal properties and hydrophilic/hydrophobic behavior, through the methods of gel permeation chromatography, Fourier transform infrared spectroscopy–attenuated total reflectance, differential scanning calorimetry, light scattering, water uptake experimentation, and water contact angle measurements. Nanoparticle formation was performed via a single solvent evaporation process, and the particles obtained were characterized by dynamic light scattering and scanning electron microscopy. Results show the significantly enhanced molecular weight of the final product after the chain‐linking reaction (up to 300,000 g/mol), as well as the non‐linear nature of the sample due to broad polydispersity, ranging from 4–13. The final products exhibited glass transition temperatures of between 30 and 44 °C, while their crystalline quality was either significantly suppressed or a completely amorphous attribute was observed. Nanoparticles in the range of 300 nm that contained metazachlor were successfully prepared, and their releasing behavior exhibited first order release kinetics. A slower rate of release was observed in samples containing 4,4′‐methylenebis(phenyl isocyanate) as a chain‐linker. Copyright © 2014 John Wiley & Sons, Ltd.     

Thermal stability of nanocrystalline ε-Fe2O3

Thermal behavior of highly crystalline ε-Fe₂O₃ nanoparticles of different apparent crystallite sizes was characterized using thermogravimetry, differential thermal analysis, and analysis of evolved gas by mass spectrometry. Phase composition of the samples was monitored ex situ by X-ray powder diffraction. The results show that the thermal stability of this metastable iron oxide polymorph decreases with increasing particle size. For the particle diameter of 19(2) nm, the transformation temperature was equal to 794(5) °C, while for 28(2) nm only 755(10) °C. Surface of the nanoparticles contained adsorbed water and carbon dioxide. Elimination of these species proceeds in two steps. Water is removed at temperatures below 200 °C and CO₂ in the temperature range between 200 and 450 °C.     

A Bis(pyridine N‐oxide) Analogue of DOTA: Relaxometric Properties of the GdIII Complex and Efficient Sensitization of Visible and NIR‐Emitting Lanthanide(III) Cations Including PrIII and HoIII

We report the synthesis of a cyclen‐based ligand (4,10‐bis[(1‐oxidopyridin‐2‐yl)methyl]‐1,4,7,10‐tetraazacyclododecane‐1,7‐diacetic acid= L1 ) containing two acetate and two 2‐methylpyridine N‐oxide arms anchored on the nitrogen atoms of the cyclen platform, which has been designed for stable complexation of lanthanide(III) ions in aqueous solution. Relaxometric studies suggest that the thermodynamic stability and kinetic inertness of the Gd^III complex may be sufficient for biological applications. A detailed structural study of the complexes by ¹H NMR spectroscopy and DFT calculations indicates that they adopt an anti‐Δ(λλλλ) conformation in aqueous solution, that is, an anti‐square antiprismatic (anti‐SAP) isomeric form, as demonstrated by analysis of the ¹H NMR paramagnetic shifts induced by Yb^III. The water‐exchange rate of the Gd^III complex is ${k{{298\hfill \atop {\rm ex}\hfill}}}$ =6.7×10⁶ s^?1, about a quarter of that for the mono‐oxidopyridine analogue, but still about 50 % higher than the ${k{{298\hfill \atop {\rm ex}\hfill}}}$ of GdDOTA (DOTA=1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid). The 2‐methylpyridine N‐oxide chromophores can be used to sensitize a wide range of Ln^III ions emitting in both the visible (Eu^III and Tb^III) and NIR (Pr^III, Nd^III, Ho^III, Yb^III) spectral regions. The emission quantum yield determined for the Yb^III complex (${Q{{{\rm L}\hfill \atop {\rm Yb}\hfill}}}$ =7.3(1)×10^?3) is among the highest ever reported for complexes of this metal ion in aqueous solution. The sensitization ability of the ligand, together with the spectroscopic and relaxometric properties of its complexes, constitute a useful step forward on the way to efficient dual probes for optical imaging (OI) and MRI.     

Magnetic mixed matrix membranes in air separation

Ethylcellulose (EC) or linear polyimide (LPI) and magnetic neodymium powder particles MQP-14-12 were used for the preparation of inorganic-organic hybrid membranes. For all the membranes, N₂, O₂ and air permeability were examined. Mass transport coefficients were determined using the Time Lag System based on dynamic experiments in a constant pressure system. The results showed that the membrane permeation properties were improved by the addition of magnetic neodymium particles to the polymer matrix. The magnetic ethylcellulose and polyimide membranes exhibited higher gas permeability and diffusivity, while their permeability selectivity and solubility were either unchanged or slightly increased. Polyimide mixed matrix membranes were characterised by a higher thermal and mechanical stability, larger filler loading, better magnetic properties and reasonable selectivity in the air separation.     

The influence of Au-nanoparticles presence in PDMS on microstructures creation by ion beam lithography

3D microstructures in pure poly(dimethylsiloxane) (PDMS) and PDMS with embedded Au nanoparticles were prepared by ion beam lithography without any further etching. Two mega-electron volts helium and 10 MeV oxygen ions were used for ion microstructuring. Parallel lines of 1 mm in length and 10 μm in thickness were fabricated for investigation of the effect of the nanoparticles presence in the polymer on the surface morphology of the created microstructures. The created microstructures were checked by optical microscope. Infrared (IR) spectrometry was used to study the effect of the ions type and fluence on the chemical changes of the material. Atomic force microscopy was used for the fine detail study as well as for checking the microstructure quality. Analysis revealed an increased radiation resistance of the nanocomposite compared to the pure PDMS. Shrinkage is proportional to the fluence, but the maximum value for both materials is limited by saturation. 3D microstructure in modified PDMS obtained at the same irradiation condition as pure PDMS is characterized by its smaller height. Obtaining the microstructure in nanocomposite of the same height as in pure PDMS by increasing the fluence can be impossible due to saturation of shrinkage and/or radiation-induced heating of the material.     

Doping Polysulfone Membrane with Alpha‐Tocopherol and Alpha‐Lipoic Acid for Suppressing Oxidative Stress Induced by Hemodialysis Treatment

The reduction of free radicals by bioactive membranes used for hemodialysis treatment is an important topic due to the constant rise of oxidative stress‐associated cardiovascular mortality by hemodialysis patients. Therefore, it is urgent to find an effective solution that helps to solve this problem. Polysulfone membranes enriched with α‐lipoic acid, α‐tocopherol, and with both components are fabricated by spin coating. The antioxidant properties of these membranes are evaluated in vitro by determining the lipid‐peroxidation level and the total antioxidant status of the blood plasma. The biocompatibility is assessed by quantifying the protein adsorption, platelet adhesion, complement activation, and hemolytic effect. All types of membranes show in vitro antioxidant activity and a trend to reduce oxidative stress in vivo; the best results show membranes prepared with a combination of both compounds and prove to be nonhemolytic and hemocompatible. Moreover, the membrane specific separation ability for the main waste products is not affected by antioxidants incorporation.     

A Photochemical/Thermal Switch Based on 4,4′-Bis(benzimidazolio)stilbene: Synthesis and Supramolecular Properties.

Stilbene derivatives are well-recognised substructures of molecular switches based on photochemically and/or thermally induced (E)/(Z) isomerisation. We combined a stilbene motif with two benzimidazolium arms to prepare new sorts of supramolecular building blocks and examined their binding properties towards cucurbit[n]urils (n=7, 8) and cyclodextrins (β-CD, γ-CD) in water. Based on the ¹H NMR data and molecular dynamics simulations, we found that two distinct complexes with different stoichiometry, i. e., guest@β-CD and guest@β-CD₂, coexist in equilibrium in a water solution of the (Z)-stilbene-based guests. We also demonstrated that the bis(benzimidazolio)stilbene guests can be transformed from the (E) into the (Z) form via UV irradiation and back via thermal treatment in DMSO.     

Conjugation of Palbociclib with MHI-148 Has an Increased Cytotoxic Effect for Breast Cancer Cells and an Altered Mechanism of Action

The CDK4/6 inhibitor palbociclib, combined with endocrine therapy, has been shown to be effective in postmenopausal women with estrogen receptor-positive, HER2-negative advanced or metastatic breast cancer. However, palbociclib is not as effective in the highly aggressive, triple-negative breast cancer that lacks sensitivity to chemotherapy or endocrine therapy. We hypothesized that conjugation of the near-infrared dye MHI-148 with palbociclib can produce a potential theranostic in triple-negative, as well as estrogen receptor-positive, breast cancer cells. In our study, the conjugate was found to have enhanced activity in all mammalian cell lines tested in vitro. However, the conjugate was cytotoxic and did not induce G1 cell cycle arrest in breast cancer cells, suggesting its mechanism of action differs from the parent compound palbociclib. The study highlights the importance of investigating the mechanism of conjugates of near-infrared dyes to therapeutic compounds, as conjugation can potentially result in a change of mechanism or target, with an enhanced cytotoxic effect in this case.