Anti-plane dynamic hole–crack interaction in a functionally graded piezoelectric media

The anti-plane dynamic problem of a functionally graded piezoelectric plane containing a hole–crack system is treated by a non-hypersingular traction-based boundary integral equation method. The material parameters vary exponentially in the same manner in an arbitrary direction. The system is loaded by an incident SH-type wave, and impermeable boundary conditions are assumed. Using a frequency-dependent fundamental solution of the wave equation, the boundary value problem is transformed into a system of integro-differential equations along the boundary of the hole and on the crack line. Its numerical solution yields the dynamic stress intensity factors and stress concentration factors. A parametric study reveals their dependence on the hole–crack scenario and its geometry, characteristics of the dynamic load and magnitude and direction of material inhomogeneity.     

Synthesis, computational modeling, and properties of benzo-appended BODIPYs

A series of new functionalized mono- and dibenzo-appended BODIPY dyes were synthesized from a common tetrahydroisoindole precursor following two different synthetic routes. Route?A involved the assembly of the BODIPY core prior to aromatization, while in Route?B the aromatization step was performed first. In general, Route?A gave higher yields of the target dibenzo-BODIPYs, due to the ease of aromatization of the BODIPYs compared with the corresponding dipyrromethenes, probably due to their higher stability under the oxidative conditions (2,3-dichloro-5,6-dicyano-1,4-benzoquinone in refluxing toluene). However, due to the slow oxidation of highly electron-deficient BODIPY 3?c bearing a meso-C(6)F(5) group, dibenzo-BODIPY 4?c was obtained, in 35?% overall from dipyrromethane, only by Route?B. Computational calculations performed at the 6-31G(d,p) level are in agreement with the experimental results, showing similar relative energies for all reaction intermediates in both routes. In addition, BODIPY 3?c had the highest molecular electrostatic potential (MEPN), confirming its high electron deficiency and consequent resistance toward oxidation. X-ray analyses of eight BODIPYs and several intermediates show that benzannulation further enhances the planarity of these systems. The π-extended BODIPYs show strong red-shifted absorptions and emissions, about 50-60?nm per benzoannulated ring, at 589-658 and 596-680?nm, respectively. In particular, db-BODIPY 4?c bearing a meso-C(6)F(5) group showed the longest λ(max) of absorption and emission, along with the lowest fluorescence quantum yield (0.31 in CH(2)Cl(2)); on the other hand monobenzo-BODIPY 8 showed the highest quantum yield (0.99) of this series. Cellular investigations using human carcinoma HEp2 cells revealed high plasma membrane permeability for all dibenzo-BODIPYs, low dark- and photo-cytotoxicities and intracellular localization in the cell endoplasmic reticulum, in addition to other organelles. Our studies indicate that benzo-appended BODIPYs, in particular the highly stable meso-substituted BODIPYs, are promising fluorophores for bioimaging applications.     

Does dinitrogen hydrogenation follow different mechanisms for [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2) and {[PhP(CH2SiMe2NSiMe2CH2)PPh]Zr}2(mu2,eta2,eta2-N2) complexes? A computational study

The mechanisms of dinitrogen hydrogenation by two different complexes--[(eta(5)-C(5)Me(4)H)(2)Zr](2)(mu(2),eta(2),eta(2)-N(2)), synthesized by Chirik and co-workers [Nature 2004, 427, 527], and {[P(2)N(2)]Zr}(2)(mu(2),eta(2),eta(2)-N(2)), where P(2)N(2) = PhP(CH(2)SiMe(2)NSiMe(2)CH(2))(2)PPh, synthesized by Fryzuk and co-workers [Science 1997, 275, 1445]--are compared with density functional theory calculations. The former complex is experimentally known to be capable of adding more than one H(2) molecule to the side-on coordinated N(2) molecule, while the latter does not add more than one H(2). We have shown that the observed difference in the reactivity of these dizirconium complexes is caused by the fact that the former ligand environment is more rigid than the latter. As a result, the addition of the first H(2) molecule leads to two different products: a non-H-bridged intermediate for the Chirik-type complex and a H-bridged intermediate for the Fryzuk-type complex. The non-H-bridged intermediate requires a smaller energy barrier for the second H(2) addition than the H-bridged intermediate. We have also examined the effect of different numbers of methyl substituents in [(eta(5)-C(5)Me(n)H(5)(-)(n))(2)Zr](2)(mu(2),eta(2),eta(2)-N(2)) for n = 0, 4, and 5 (n = 5 is hypothetical) and [(eta(5)-C(5)H(2)-1,2,4-Me(3))(eta(5)-C(5)Me(5))(2)Zr](2)(mu(2),eta(2),eta(2)-N(2)) and have shown that all complexes of this type would follow a similar H(2) addition mechanism. We have also performed an extensive analysis on the factors (side-on coordination of N(2) to two Zr centers, availability of the frontier orbitals with appropriate symmetry, and inflexibility of the catalyst ligand environment) that are required for successful hydrogenation of the coordinated dinitrogen.     

The mechanism of alkaline hydrolysis of amides: a comparative computational and experimental study of the hydrolysis of N‐methylacetamide,N‐methylbenzamide,and acetanilide

Theoretical computations and experimental kinetic measurements were applied in studying the mechanistic pathways for the alkaline hydrolysis of three secondary amides: N‐methylbenzamide, N‐methylacetamide, and acetanilide. Electronic structure methods at the HF/6‐31+G(d,p) and B3LYP/6‐31+G(d,p) levels of theory are employed. The energies of the stationary points along the reaction coordinate were further refined via single point computations at the MP2/6‐31+G(d,p) and MP2/6‐311++G(2d,2p) levels of theory. The role of water in the reaction mechanisms is examined. The theoretical results show that in the cases of N‐methylbenzamide and N‐methylacetamide the process is catalyzed by an ancillary water molecule. The influence of water is further assessed by predicting its role as bulk solvent. The alkaline hydrolysis process in aqueous solution is characterized by two distinct free energy barriers: the formation of a tetrahedral adduct and its breaking to products. The results show that the rate‐determining stage of the process is associated with the second transition state. The entropy terms evaluated from theoretical computations referring to gas‐phase processes are significantly overestimated. The activation barriers for the alkaline hydrolysis of N‐methylbenzamide and acetanilide were experimentally determined. Quite satisfactory agreement between experimental values and computed activation enthalpies was obtained. Copyright © 2008 John Wiley & Sons, Ltd.     

Investigations on the Synthesis,Reactivity, and Properties of Perfluoro-α-Benzo-Fused BOPHY Fluorophores

The synthesis and reactivity of 3,8-dibromo-dodecafluoro-benzo-fused BOPHY 2 are reported, via S_NAr with O-, N- S- and C-nucleophiles, and in Pd(0)-catalyzed cross-coupling reactions (Suzuki and Stille). The resulting perfluoro-BOPHY derivatives were investigated for their reactivity in the presence of various nucleophiles. BOPHY 3 displays reversible color change and fluorescence quenching in the presence of bases (Et₃N, DBU), whereas BOPHY 7 reacts preferentially at the α-pyrrolic positions, and BOPHY 8 undergoes regioselective fluorine substitution in the presence of thiols. The structural and electronic features of the fluorinated BOPHYs were studied by TD-DFT computations. In addition, their spectroscopic and cellular properties were investigated; BOPHY 10 shows the most red-shifted absorption/emission (λ_max 659/699 nm) and 7 the highest fluorescence (Φ_f=0.95), while all compounds studied showed low cytotoxicity toward human HEp2 cells and were efficiently internalized.     

Mixed-ligand Al complex—a new approach for more high efficient OLEDs

The mixed-ligand Aluminum bis(8-hydroxyquinoline) acetylacetonate (Alq₂Acac) complex was presented and its performance as electroluminescent and electron transporting layer for OLED was studied. The photophysical properties of the novel complex were investigated and compared with the properties of the parent Alq₃. Highly efficient OLED based on the mixed-ligand Al complex was developed with two times higher luminescence and efficiency compared to the identical OLED based on the conventional Alq₃ The better performance of the devices make the novel Al complex a very promising material for OLEDs.     

Dynamics of a compound vesicle in shear flow

The dynamics of a compound vesicle (a lipid bilayer membrane enclosing a fluid with a suspended particle) in shear flow is investigated by using both numerical simulations and theoretical analysis. We find that the nonlinear hydrodynamic interaction between the inclusion and the confining membrane gives rise to new features of the vesicle dynamics: The transition from tank treading to tumbling can occur in the absence of any viscosity mismatch, and a vesicle can swing if the enclosed particle is nonspherical. Our results highlight the complex effects of internal cellular structures have on cell dynamics in microcirculatory flows. For example, parasites in malaria-infected erythrocytes increase cytoplasmic viscosity, which leads to increase in blood viscosity.     

Matrix-assisted laser desorption/ionization, fast atom bombardment and plasma desorption mass spectrometry of polyethylene glycol esters of (2-benzothiazolon-3-yl)acetic acid.

Fast atom bombardment (FAB), matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) and plasma desorption (PD) mass spectra of newly synthesized polyethylene glycols (PEGs), (M(w) 600-4000 Da) chemically modified with biologically active (2-benzothiazolon-3-yl)acetyl end-groups are described (products 1-6). The spectra were also used for the determination of the molecular mass characteristics (number average (M(n)) and weight average (M(w)) molecular masses) of the initial and modified PEGs. As expected, M(n) and M(w) of the modified samples are higher than those of the non-modified samples. However, it is shown that molecular mass dispersity (determined by the comparison of the polydispersity indices (PDI = M(w)/M(n)) of both types of PEGs) essentially do not change during this modification. The FAB mass spectra, together with molecular species, show the presence of abundant [M + Na](+) ions of product 1 and [M + Na + H](+) species of 2 and 3, and [M + Na + 2H](+) of product 4. Two main series of fragment ions, derived from the cleavage of the ether bonds, are observed. The number fractions of the molecular adduct ions and fragment adduct ions, determined from the FAB and PD mass spectra of the modified PEGs, are compared. The MALDI-TOF mass spectra of compounds 1-6 show the presence of two series of polymers. The most abundant peaks are due to [M + Na](+) and [M + K](+) ions originating from the polymers, in which the two terminal hydroxyl groups of PEGs are esterified with (2-benzothiazolon-3-yl)acetic acid. The less abundant peaks are due to the monosubstituted polymers.