Efficient desulfurization of 2-thiopyrimidine nucleosides to the corresponding 4-pyrimidinone analogues using trans-2-(phenylsulfonyl)-3-phenyloxaziridine

A brief treatment of 2-thiopyrimidine nucleosides (s²U^∗) with trans-2-phenylsulfonyl-3-phenyloxaziridine (PSO) results in efficient substrate desulfurization leading to the corresponding 4-pyrimidinone analogues (H²U^∗). The key transformation proceeds through oxidation of the 2-thiocarbonyl group to a sulfur oxyacid derivative and subsequent elimination of sulfur dioxide. 4-Pyrimidinone 1-β-d-riboside (H²U) has been transformed into the respective phosphoramidite, a ready-to-use monomer for the introduction of a modified nucleoside into an oligonucleotide chain. Moreover, the effective desulfurization of the 2-thiouridine nucleotide could be achieved directly at the oligonucleotide level, by treatment of the TdA(s²U)dGdC oligonucleotide with PSO, as verified by MALDI-TOF mass spectrometry.     

Photoactivated tungsten hexacarbonyl-catalyzed conversion of alkynols to glycals

The photoactivated W(CO)(6)/DABCO/THF system has been used for the formal endo-cyclization of alkynes to pyran rings. We found that the regioselectivity of ring closure depends on the relative configuration of the 3,5-dihydroxy-1-alkynes, as well as, more decisively, on the type of O-protective group. Oxygen substitution at the propargylic carbon slows the rate of alkyne insertion and allows for dihydrofuran formation through exo-cyclization. In contrast, the use of bulky silyl ethers or carbon substituents leads to dihydropyrans through endo-cyclization. Substrates bearing leaving groups such as esters, phenols, or thiophenols at the propargylic site eliminate and thus represent a limitation to the cycloisomerization methodology. Propargyl vinyl ethers will rearrange to give dienals instead of glycals. 1,2-Wittig rearrangement products of dihydropyrans are readily prepared and converted to complex bicyclic building blocks for organic synthesis.     

Low-coordinate chromium siloxides: the "box" [Cr(mu-Cl)(mu-OSitBu3)]4, distorted trigonal [(tBu3SiO)3Cr][Na(benzene)] and [(tBu3SiO)3Cr][Na(dibenzo-18-c-6)], and trigonal (tBu3SiO)3Cr

Treatment of CrCl(2)(THF)(2) with NaOSi(t)Bu(3) afforded the tetrameric "box" [Cr(mu-Cl)(mu-OSi(t)Bu(3))](4) (1, X-ray). THF cleaved 1 to provide trans-(silox)ClCr(THF)(2) (2), whereas degradation of 1 with 4-picoline caused disproportionation and the generation of trans-Cl(2)Cr(4-pic)(2) and trans-(silox)(2)Cr(4-pic)(x) (n = 2, 3; 3, 3-4-pic). Chromous centers in 1 were antiferromagnetically coupled, and density functional calculations on the high-spin (multiplicity = 17) model [Cr(mu-Cl)(mu-OH)](4) (1') revealed that its singly occupied 3d orbitals spanned an energy range of approximately 2 eV. The addition of 8 equiv of Na(silox) to 1 yielded [((t)Bu(3)SiO)Cr(mu-OSi(t)Bu(3))(2)]Na.C(6)H(6) (4, Y shaped, angle OCrO(Na) = 91.28(7) degrees), and treatment of 4 with dibenzo-18-crown-6 produced [(silox)(3)Cr][Na(dibenzo-18-crown-6)] (5, angle OCrO = approximately 120 degrees, (120 + alpha) degrees, (120 - alpha) degrees). Calculations of [((t)Bu(3)SiO)Cr(mu-OSi(t)Bu(3))(2)]Na (4') and Cr(silox)(3)(-) (5') provided reasonable matches with the experimental geometries (X-ray). The trigonal chromic derivative (silox)(3)Cr (6) was synthesized from CrCl(3)(THF)(3) for structural and calculational comparisons to the chromous derivatives.     

Facile Desulfurization of Thioamides and Thioureas with Tetrabutylammonium Periodate under Mild Conditions

Summary. Thioamides and thioureas were reacted with tetrabutylammonium periodate at room temperature to afford the corresponding amides and ureas, respectively, under aprotic conditions.     

Solvent effects in a carbenoid N-H insertion route to triarylamines via 2-diazo-1,3-cyclohexanedione

The Rh-carbenoid derived from 2-diazo-1,3-cyclohexanedione inserts into the N-H bond of arylalkylamines and diarylamines. A solvent for this reactive carbenoid is suggested. The insertion products undergo a Pd-mediated aromatization to afford alkyldiarylamines and triarylamines.     

Modifying the thermosensitivity of copolymers of sodium styrene sulfonate and<Emphasis Type="Italic"> N</Emphasis>-isopropylacrylamide with dodecyltrimethylammonium chloride

The interactions between copolymers of sodium styrene sulfonate (SSS) and N-isopropylacrylamide (NIPAM), anionic polyelectrolytes, and dodecyltrimethylammonium chloride (DTAC), a cationic surfactant, were studied in aqueous solutions of various ionic strengths. The copolymers were found to be thermoresponsive, showing a lower critical solution temperature (LCST). The influence of the polymer composition, the surfactant concentration, and the ionic strength on the LCST was studied. The surfactant was found to interact strongly with the polymer, forming mixed polymer-surfactant micelles. The critical aggregation concentration (cac) of the polymer-surfactant system was found from fluorescence spectroscopy using pyrene as a fluorescent probe. A strong dependence of the anionic polyelectrolyte-cationic surfactant interactions on the structure of the ionic comonomer was observed.     

Probing the formation of bicyclo[4.2.0]octan-1-ols

Reaction of lithium enolates of simple ketones with (+/-)-phenyl vinyl sulfoxide has potential for the convergent construction of complex fused ring systems containing a bicyclo[n.2.0]alkan-1-ol. The formation of sulfinylbicyclo[4.2.0]octan-1-ols 1-3 from the lithium enolate of cyclohexanone with (+/-)-phenyl vinyl sulfoxide or (R)-(+)-p-tolyl vinyl sulfoxide 18 was used to probe the mode of this novel cyclization reaction. Using phenyl vinyl sulfoxide, variations in the reaction lighting and solvent were investigated, in conjunction with radical trapping (TEMPO) and isotope labeling (deuterium) experiments. Cyclization to form sulfinylbicyclooctanols 1-3 is likely to proceed via an intermediate that ring closes to the bicycloalkanol anion 11 and was presently favored by the use of solvents such as THF or DME.     

Using a non-invasive stable isotope tracer to measure the absorption of water in humans

The development of solutions that prevent dehydration or promote adequate re-hydration play a vital role in preventing fatigue during exercise, however, the methods commonly used to assess the hydration ability of such solutions are invasive and often assess the components of absorption separately. This paper describes using a non-invasive deuterium tracer technique that assesses gastric emptying and intestinal absorption simultaneously to evaluate the uptake of water during rest and exercise. The kinetics of absorption are further examined by mathematical modelling of the data generated. For the rest group, 0.05 g/kg of body weight of deuterium, contained in gelatine capsules, was ingested with ordinary tap water and saliva samples were collected every 5 min for one hour while the subject remained seated. The deuterium was administered as above for the exercise group but sample collection was during one hour of exercise on a treadmill at 55% of the subject's maximum heart rate. The enrichment data for each subject were mathematically modelled and the parameters obtained were compared across groups using an independent samples t-test. Compared with the rest condition, the exercise group showed delayed absorption of water as indicated by significant differences for the modelling parameters t2, t1/2, maximum absorption rate and solution absorption amount at t1. Labelling with a deuterium tracer is a good measure of the relative rate ingested fluids are absorbed by the body. Mathematical modelling of the data generates rates of maximum absorption and allows calculation of the percentage of the solution that is absorbed at any given time during the testing period.     

Synthesis of highly substituted meso-tetraarylporphyrins

meso-Tetraphenylporphyrin (and its derivatives), in the reaction with fuming yellow nitric acid (d=1.53), form either 5-(4-nitroaryl)-10,15,20-triarylporphyrin, 5,10-bis(4-nitroaryl)-15,20-diarylporphyrin, or 5,10,15-tris(4-nitroaryl)-20-arylporphyrin, depending on the reaction temperature (0-20 °C), amounts of the acid used, and reaction time. The above nitroporphyrins react, in the presence of a base (t-BuOK) at 0 °C, with carbanions (which bear nucleophugal groups at the carbanionic center: ⁻CH(Cl)SO₂Tol, ⁻CH(Br)SO₂Tol, and ⁻CH(Cl)SO₂NMe₂), leading to the nucleophilic substitution of hydrogen in one or more of the meso-nitroaryl rings. By this route, the preparation of the highly substituted ‘synthetic’ porphyrins (bearing up to ten O-, N-, Cl-, or C-substituents) was demonstrated.