Metallocycle synthesis accelerated by high pressure

Reaction of cis-[FeH₂(dmpe)₂](1) with diphenylbutadiyne results in an insertion into both of the iron-hydride bonds to form an iron metallocycle. Spectroscopic and crystallographic data of [Fe(PhHCC₂CHPh)(dmpe)₂] (3) show 1,4-diphenylbutatriene is symmetrically bound to the metal via the central double bond. The reaction to form the metallocyclic complex is greatly accelerated by application of external pressure. A 41% yield of (3) is isolated after two days at atmospheric pressure or after approximately 75 min at 800MPa.     

Synthesis of part of a proposed insulin second messenger glycosylinositol phosphate and the inner core of glycosylphosphatidylinositol anchors

Synthesis of 6-O-(2-amino-2-deoxy--D-glucopyranosyl)-D-myo-inositol 1-phosphate, an inner core structure found in various glycosylphosphatidylinositols, and the corresponding 1,2-cyclic phosphate, proposed as part of an insulin second messenger glycosylinositol phosphate, is described. Chirality in the inositol part of the molecule was achieved by the use of a known D-camphor acetal intermediate. The glycosylation used 4-O-allyl-2-azido-3,6-di-O-benzyl-2-deoxy--D-glucopyranosyl fluoride as glycosyl donor. The allyl group can be chemoselectively removed, opening a route to oligosaccharides bound to the 4-position of the glucosamine unit. The phosphorylation was accomplished by the phosphoramidate procedure.     

Molecular integrals over Gaussian-type geminal basis functions

We present formulas for the evaluation of molecular integrals over basis functions with an explicit Gaussian dependence on interelectronic coordinates. These formulas use expansions in Hermite Gaussian functions and represent an extension to the work of McMurchie and Davidson to two-electron basis functions. Integrals that depend on the coordinates of up to four electrons are discussed explicitly. A key feature of this approach is that it allows full exploitation of the shell structure of the orbital part of the basis. Received: 24 February 1997 / Accepted: 4 March 1997     

Optical emission spectroscopy as a real time diagnostic tool for plasma-assisted deposition of TiN

Real-time optical emission spectroscopy (OES) was used to monitor the deposition of TiN both from mixtures of tetrakis(dimethylamino)titanium (TDMATi)-N₂ and TiCl₄-H₂-N₂ in an electron cyclotron resonance chemical vapor deposition system. The accurate control of the ratio of the emission intensities of ionized nitrogen at 391.4 nm and molecular nitrogen at 357.7 nm (N ₂ ⁺ /N₂) led to low temperature deposition of stoichiometric TiN (Ti/N ≈ 1) and very low resistivity in both cases. It was found that high ion density plasmas are crucial for a considerable reduction of the deposition temperature while maintaining good film quality. OES shows that the abundance of certain excited plasma species is not only dependent on the gas mixture and the deposition parameters, such as total pressure and microwave power, but also is strongly affected by the magnetic field configuration. The deposition rate and the film resistivity can be related to the emission intensity ratio, I(N ₂ ⁺ )/I(N₂). Finally, the two processes are compared in terms of the quality of as-deposited and heat-treated films. The comparison shows that the films obtained with TDMATi exhibit lower resistivity and are thermally more stable than with TiCl₄.     

Ultrasensitive small molecule fluorogenic probe for human heparanase

Heparanase (HPA) is a critical enzyme involved in the remodeling of the extracellular matrix (ECM), and its elevated expression has been linked with diseases such as various types of cancer and inflammation. The detection of heparanase enzymatic activity holds tremendous value in the study of the cellular microenvironment, and search of molecular therapeutics targeting heparanase, however, no structurally defined probes are available for the detection of heparanase activity. Here we present the development of the first ultrasensitive fluorogenic small-molecule probe for heparanase enzymatic activity via tuning the electronic effect of the substrate. The probe exhibits a 756-fold fluorescence turn-on response in the presence of human heparanase, allowing one-step detection of heparanase activity in real-time with a picomolar detection limit. The high sensitivity and robustness of the probe are exemplified in a high-throughput screening assay for heparanase inhibitors.

Heparanase, a critical enzyme involved in the remodeling of the extracellular matrix, activates a disaccharide probe HADP to give a strong fluorescence signal.     

Stereoselective synthesis of unnatural α-amino acid derivatives through photoredox catalysis

A protocol for stereoselective C-radical addition to a chiral glyoxylate-derived N-sulfinyl imine was developed through visible light-promoted photoredox catalysis, providing a convenient method for the synthesis of unnatural α-amino acids. The developed protocol allows the use of ubiquitous carboxylic acids as radical precursors without prior derivatization. The protocol utilizes near-stoichiometric amounts of the imine and the acid radical precursor in combination with a catalytic amount of an organic acridinium-based photocatalyst. Alternative mechanisms for the developed transformation are discussed and corroborated by experimental and computational studies.

A protocol for stereoselective C-radical addition to a chiral glyoxylate-derived N-sulfinyl imine was developed through visible light-promoted photoredox catalysis, providing a convenient method for the synthesis of unnatural α-amino acids.     

Efficient Entropy-Driven Inhibition of Dipeptidyl Peptidase III by Hydroxyethylene Transition-State Peptidomimetics

Dipeptidyl peptidase III (DPP3) is a ubiquitously expressed Zn-dependent protease, which plays an important role in regulating endogenous peptide hormones, such as enkephalins or angiotensins. In previous biophysical studies, it could be shown that substrate binding is driven by a large entropic contribution due to the release of water molecules from the closing binding cleft. Here, the design, synthesis and biophysical characterization of peptidomimetic inhibitors is reported, using for the first time an hydroxyethylene transition-state mimetic for a metalloprotease. Efficient routes for the synthesis of both stereoisomers of the pseudopeptide core were developed, which allowed the synthesis of peptidomimetic inhibitors mimicking the VVYPW-motif of tynorphin. The best inhibitors inhibit DPP3 in the low μM range. Biophysical characterization by means of ITC measurement and X-ray crystallography confirm the unusual entropy-driven mode of binding. Stability assays demonstrated the desired stability of these inhibitors, which efficiently inhibited DPP3 in mouse brain homogenate.     

Hexaphenylditetrels – When Longer Bonds Provide Higher Stability

We present a computational analysis of hexaphenylethane derivatives with heavier tetrels comprising the central bond. In stark contrast to parent hexaphenylethane, the heavier tetrel derivatives can readily be prepared. In order to determine the origin of their apparent thermodynamic stability against dissociation as compared to the carbon case, we employed local energy decomposition analysis (LED) and symmetry-adapted perturbation theory (SAPT) at the DLPNO-CCSD(T)/def2-TZVP and sSAPT0/def2-TZVP levels of theory. We identified London dispersion (LD) interactions as the decisive factor for the molecular stability of heavier tetrel derivatives. This stability is made possible owing to the longer (than C−C) central bonds that move the phenyl groups out of the heavily repulsive regime so they can optimally benefit from LD interactions.     

A Structural Diversity of Molecular Alkaline-Earth-Metal Polyphosphides: From Supramolecular Wheel to Zintl Ion

A series of molecular group 2 polyphosphides has been synthesized by using air-stable [Cp*Fe(η⁵-P₅)] (Cp*=C₅Me₅) or white phosphorus as polyphosphorus precursors. Different types of group 2 reagents such as organo-magnesium, mono-valent magnesium, and molecular calcium hydride complexes have been investigated to activate these polyphosphorus sources. The organo-magnesium complex [(^DippBDI−Mg(CH₃))₂] (^DippBDI={[2,6-ⁱPr₂C₆H₃NCMe]₂CH}⁻) reacts with [Cp*Fe(η⁵-P₅)] to give an unprecedented Mg/Fe-supramolecular wheel. Kinetically controlled activation of [Cp*Fe(η⁵-P₅)] by different mono-valent magnesium complexes allowed the isolation of Mg-coordinated formally mono- and di-reduced products of [Cp*Fe(η⁵-P₅)]. To obtain the first examples of molecular calcium-polyphosphides, a molecular calcium hydride complex was used to reduce the aromatic cyclo-P₅ ring of [Cp*Fe(η⁵-P₅)]. The Ca-Fe-polyphosphide is also characterized by quantum chemical calculations and compared with the corresponding Mg complex. Moreover, a calcium coordinated Zintl ion (P₇)³⁻ was obtained by molecular calcium hydride mediated P₄ reduction.     

Kinetic Analysis of the Hydrolysis of Pentose-1-phosphates through Apparent Nucleoside Phosphorolysis Equilibrium Shifts**

Herein, we report an addition to the toolbox for the monitoring and quantification of the hydrolytic decay of pentose-1-phosphates, which are known to be elusive and difficult to quantify. This communication describes how apparent equilibrium shifts of a nucleoside phosphorolysis reaction can be employed to calculate hydrolytic loss of pentose-1-phosphates based on the measurement of post-hydrolysis equilibrium concentrations of a nucleoside and a nucleobase. To demonstrate this approach, we assessed the stability of the relatively stable ribose-1-phosphate at 98 °C and found half-lives of 1.8–11.7 h depending on the medium pH. This approach can be extended to other sugar phosphates and related reaction systems to quantify the stability of UV-inactive and hard-to-detect reaction products and intermediates.