A model developed for acid dissolution thermodynamics of a Turkish bentonite

A model was proposed to calculate some thermodynamic parameters for the acid dissolution process of a bentonite containing a calcium-rich smectite as clay mineral along with quartz, opal and feldspar as impurities. The bentonite sample was treated with H₂SO₄ by applying dry method in the temperature range 50–150°C for 24 h. The acid content in the dry bentonite-sulphuric acid mixture was 45 mass%. The total content (x) of Al₂O₃, Fe₂O₃ and MgO remained in the undissolved sample after treatment was taken as an equilibrium parameter. An apparent equilibrium constant, K _a, was calculated for each temperature by assuming K _a=(x _m−x)/x where x _m is the total oxide content of the natural bentonite. Also, an apparent change in Gibbs free energy, ΔG _a^o, was calculated for each temperature by using the K _a value. The graphs of lnK _a vs. 1/T and ΔG _a^o vs. T were drawn and then the real change in both the enthalpy, ΔH ^o and the entropy, ΔS ^o, values were calculated from the slopes of the straight lines, respectively. Inversely, real ΔG ^o and K values were calculated from the real ΔH ^o and ΔS ^o values through ΔG ^o = −RT ln K = ΔH ^o − TΔS ^o equation. The best ΔH ^o and ΔS ^o fittings to this relation were found to be 65687 J mol⁻¹ and 164 J mol⁻¹K⁻¹, respectively.     

A single parameter determines mesophase transitions in Swollen Liquid Crystals

We report how the control of a single parameter, the co-surfactant, determines the phase transitions of oil-in-water swollen liquid crystals (SLCs) prepared with cetyltrimethylammonium bromide (CTAB), from cubic to hexagonal, lamellar, and finally sponge-like structures. SLCs are complex mixtures (surfactant + co-surfactant + water + salt + oil) usually prepared to form hexagonal mesophases, with cell parameters tunable between 3 and 30 nm. These hexagonal mesophases were successfully used as nanoreactors to prepare a broad range of nanostructured materials. Because the potential of these mesophases as adaptive nanoreactors has not been extended to other liquid crystal geometries than the hexagonal, we studied in a first step the structure evolution of SLCs made with CTAB, cyclohexane, pentanol-1, water and different stabilising salts. We used small-angle X-ray scattering (SAXS), polarised light microscopy and Freeze-Fracture TEM to provide a partial phase diagram and list the different mesophases obtained as a function of composition. We report that the adjustment of a single parameter, the co-surfactant (pentanol-1), determines the phase transition between cubic, hexagonal, lamellar, and sponge-like structures, all other parameters such as the nature and concentration of salt, or amount of oil being constant.     

Organotin(IV) complexes with 2-hydroxynaphthaldehyde-N(4)-ethylthiosemicarbazone: Synthesis,characterization, and in vitro antibacterial activity

Four new organotin(IV) complexes with 2-hydroxynaphthaldehyde-N(4)-ethylthiosemicarbazone [(H₂DNET), (1)] of the type [MeSnCl(DNET] (2), [BuSnCl(DNET)] (3), [PhSnCl(DNET)] (4), and [Ph₂Sn(DNET] (5) have been synthesized by the direct reaction of H₂DNET (1) with organotin(IV) chloride(s) in the presence of potassium hydroxide in absolute methanol. All the compounds were characterized by elemental analyses, molar conductivity, UV-Vis, IR, ¹H, ¹³C, and ¹¹⁹Sn NMR spectral studies. The molecular structure of ligand (1) has been confirmed by X-ray single crystal diffraction. Spectroscopic data clearly suggested that Sn(IV) center is coordinated with the ONS tridentate ligand (H₂DNET) and exhibits a five-coordinate geometry in solution. Antibacterial studies were carried out in vitro against four bacterial strains. All organotin(IV) compounds (2–5) showed good activity against various bacteria but lower activity than the reference drug (Ciprofloxacin). The results demonstrate that organic groups attached to tin(IV) moiety have significant effect on their biological activities. Among them, diphenyltin(IV) derivative 5 exhibits significantly good activity than the other organotin(IV) derivatives (2–4).     

Separation of negatively charged carbohydrates by capillary electrophoresis

Capillary electrophoresis (CE) has recently emerged as a highly promising technique consuming an extremely small amount of sample and capable of the rapid, high-resolution separation, characterization, and quantitation of analytes. CE has been used for the separation of biopolymers, including acidic carbohydrates. Since CE is basically an analytical method for ions, acidic carbohydrates that give anions in weakly acid, neutral, or alkaline media are often the direct objects of this method. The scope of this review is limited to the use of CE for the analysis of carbohydrates containing carboxylate, sulfate, and phosphate groups as well as neutral carbohydrates that have been derivatized to incorporate strongly acidic functionality, such as sulfonate groups.     

Dynamic collision-induced dissociation (DCID) in a quadrupole ion trap using a two-frequency excitation waveform: I. Effects of excitation frequency and phase angle

This study describes the application of a two-frequency excitation waveform to the end-cap electrodes of a quadrupole ion trap (QIT) during the mass acquisition period to deliberately fragment selected precursor ions. This approach obviates the need for a discrete excitation period and guarantees on-resonant excitation conditions without any requirement for resonant tuning; it is therefore faster than the conventional approach to collision-induced dissociation (CID) in QITs. The molecular ion of n-butylbenzene is used as thermometer molecule to determine the energetics of the new excitation procedure. The excitation waveform, consisting of two closely spaced sinusoidal frequencies, has an interference pattern that displays nodes and crests in the time domain. The energetics (determined by the product ion ratios of 91/92 Th) and CID efficiencies are highly dependent on the excitation amplitude, the relative position of the excitation frequencies in the Mathieu stability diagram, and whether the ions come into resonance during a node or crest of the excitation waveform. Under highly energetic conditions, ratios of 91/92 as large as 15 can be obtained at concomitant CID efficiencies of 10%, indicating internal energies in excess of 10 eV at the time of fragmentation. These extremely high internal energies far exceed the energetics achievable using conventional on-resonance excitation in QITs, indicating that the collisional heating rate is very fast in the new approach. Under less energetic conditions CID efficiencies as high as 70% are possible, which compares favorably with results obtained by conventional on-resonance excitation. Correlation analyses are used to determine the conditions that simultaneously optimize energetic and efficient fragmentation conditions.     

Dioxomolybdenum(VI) complexes of 2-hydroxybenzaldehyde 4-phenyl-S-methylthiosemicarbazone

Mixed ligand complexes of dioxomolybdenum(VI) with 2-hydroxybenzaldehyde 4-phenyl-S-methylthiosemicarbazone (H₂L) were prepared with the formula [MoO₂(L)D] (D = H₂O, methyl, n-butyl, and n-undecyl alcohol, DMF, DMSO, pyridine, 4-picoline, and 3,5-lutidine). The compounds were characterized by elemental analysis, IR and ¹H NMR spectroscopy. The thermal decomposition of the compounds were investigated by using TGA, DTG, and DTA methods in air, and the thermal behavior depending on the second ligand molecule was discussed. A single crystal of the DMF coordinated complex was studied by X-ray diffractometry. The text was submitted by the authors in English.     

Solvent Effect upon Ion-pair Extraction of Different Sodium Dyes Using Some Crown Ethers

Liquid-liquid extractive-spectrophotometric studies of sodium ion complexes of 18-crown-6(18C6), dibenzo-18-crown-6(DB18C6), 15-crown-5(15C5), and 12-crown-4(12C4) and anionic dyes [4-(2-pyridylazo)-resorcinol monosodium salt monohydrate (PAR), Eriochrom Black T (EBT), and methyl orange (MOR)] and sodium picrate (PICRAT) as the counter ion are described. The overall extraction equilibrium constants for the 1 : 1 complexes of the above crown ethers with sodium dyes between different organic solvents and water have been determined at 25deg;C. They were conducted in various solvent-water systems maintaining an identical initial cation concentration in water, [M0+]w, and macrocyclic ligand concentration in the organic phase, [L0]org}, so that in all extractions [M0+]w : [L0]org ratios were 1 : 1, 1 : 10, 1 : 20, 1 : 50, and 1 : 62.5. An ion association complex formed between the sodium-crown ether complex ion and a dye anion was extracted into the organic solvent, and then the dye concentration of the separated aqueous phase was measured with an ultraviolet-visible spectrophotometer. PAR was the best associated dye with all crown ethers sodium-dyes and the extracted dye occurs as the ion-pair complex. Methylene chloride was found to be better than other extractive solvents used in this study.