Determination of traces of iron in indium phosphide by electrothermal atomic absorption spectrometry combined with solvent extraction

An electrothermal atomic absorption (ETAAS) method for the determination of traces of iron (0.1-1.0 microgram g-1) in Fe-doped indium phosphide (InP) has been developed. In order to overcome the indium matrix-effect and to achieve a useful detection limit, a preliminary solvent-extraction of Fe(III) with acetylacetone (HAA) is necessary. After sample dissolution with hydrochloric acid (1 + 1) the digest is evaporated to dryness, Fe(II) is oxidized to Fe(III) with nitric acid, the residue is dissolved in 0.01 mol L-1 HCl and the iron is extracted at pH 2.0 with 0.5 mol L-1 HAA in toluene. The organic phase is injected into the graphite furnace and the iron is directly evaluated by external organic standard calibration. The limit of detection (3SB) resulting from further in-situ preconcentration is 0.03 microgram g-1. When the method was applied to the analysis of real samples containing 0.2-0.7 microgram g-1 Fe, the RSD was in the range 8-21%. Results were compared with those independently obtained on the decomposed sample solution with inductively coupled atomic emission spectrometry (ICP-AES). The detection limit of the ICP-AES method, that needs matrix-matched standards, is 0.20 microgram g-1.     

Surface characterization of synthetic and mineral carbonate fluoroapatites

As part of a larger project concerning the sorption capacities of carbonate fluoroapatites, the physical and surface properties of the synthetic carbonate fluoroapatite and mineral francolite retained for this work have been carefully examined. The average particle size of the powdered samples, determined by laser granulometry, is around 30 microm. Their specific surface areas, measured according to the N(2) BET method, are 8.8+/-0.1 and 13.9+/-0.1 m(2).g(-1), respectively, for the synthetic and the mineral compound. The solubility of both solids has been studied under undersaturation initial conditions. The synthetic compound has a solubility product of 10(-103+/-2), but the mineral francolite, which is highly substituted and poorly crystalline, is more soluble and dissolves incongruently. The amphoteric properties of the hydrous carbonate fluoroapatites surfaces have also been investigated through zeta-potential measurements and potentiometric titrations in KNO(3) medium at 25 degrees C. The experimental data have been interpreted using the computer program FITEQL 3.2, applying either the nonelectrostatic or the constant capacitance model. For both solids, the values of the surface acidity constants determined with the two models are very close, suggesting a weak contribution of the electrostatic interactions. Moreover, the more acidic surface of the synthetic compound compared to that of the mineral one is assigned to the differences in crystallinity and chemical composition between the two solids.     

Plume separation effect in pulsed laser ablation deposition

The results of a new geometrical configuration of pulsed laser ablation deposition technique that uses a hemi-cylindrical transparent plastic substrate are presented and discussed. With the new arrangement, two distinct components with different material compositions have been clearly observed. While the first component comprises atoms, ions and molecules and constitutes visible or the so-called luminous plume, the second component is formed of fragments, clusters and liquid droplets and is invisible to the naked eye. The latter component constitutes a major part of the ablated material. The luminous plume symmetry axis does not coincide with the mass distribution symmetry axis. In the case of Si ablation and 45° incident beam angle, the maximum deflection angle of the luminous plume reaches 30° with respect to the normal to the target surface, while the deflection angle of the second component is higher than 40°. The change in the target morphology and the dependence of the composition of the ablated material on local fluence, along with the hydrodynamic effects, is sought to explain this previously unexpected and unreported phenomenon. PACS 61.80.Ba; 47.35.+i; 52.38.Mf; 81.15.Fg     

Magnetite, a model system for mixed-valence oxides, does not show charge ordering

We have investigated the charge ordering (CO) in magnetite below the Verwey transition. A new set of half-integer and mixed-integer superlattice reflections of the low-temperature phase have been studied by x-ray resonant scattering. None of these reflections show features characteristic of CO. We demonstrate the absence of CO along the c axis with the periodicity of either the cubic lattice q=(001) or the doubled cubic lattice q=(001/2). This result suggests that the Verwey transition is caused by strong electron-phonon interaction instead of an electronic ordering on the octahedral Fe atoms.     

On spectral geometry of minimal parallel submanifolds

We consider the problem of characterizing some minimal submanifolds using the spectrum⁰Spec of the Laplace-Beltrami operator acting on fucntions. In particular we characterize then-dimensional compact minimal totally real parallel submanifolds immersed in the complex projective spaceCP ⁿ, 3≤n≤6, by their⁰Spec in the class of all compact totally real minimal submanifolds ofCP ⁿ. Moreover, we characterize the Clifford torus by its⁰Spec in the class of all compact minimal submanifolds of the Euclidean sphereS ⁿ⁺¹(1). Authors supported by funds of the University of Lecce and the M.U.R.S.T.     

Anchoring sulphur-headgroup organic molecules at Cu(1 0 0): Tailoring the interface electronic states

Sulphur-headgroup organic molecules have been chemisorbed on Cu(1 0 0) as self-assembled monolayers (SAMs) in highly-ordered two-fold symmetry structures, and the electronic states induced at the interface have been measured by photoemission: a close similarity of the main interface states for methane-thiolate and mercaptobenzoxazole on Cu(1 0 0) in the same p(2 × 2)-phase is observed. The bonding states for methane-thiolate/Cu(1 0 0) in the p(2 × 2) and c(2 × 2) structures have been compared to ab-initio calculation of the total density of states (DOS) for the S/Cu(1 0 0) system in the same phases. The major role of the S-Cu bonding to determine the density of state evolution at the interface is brought to light. The observed differences in the two phases depend mainly on the charge distribution associated to the different molecular packing, with a minor role of the radical group.     

Global existence and exponential stability for a contact problem between two thermoelastic beams

In this paper we analyze a dynamic unilateral contact problem between two thermoelastic beams. We establish the existence of a weak global-in-time solution, by a penalization method. Moreover, we study the asymptotic behavior of such a solution proving that the energy associated to the system decays exponentially to zero, as time goes to infinity.     

Double XeCl laser with lateral UV preionization

We present a very compact and very reliable laser system formed of two discharge sections both with lateral UV preionization. The discharge electrodes are contained in a single vessel and form an oscillator-amplifier system. A single spark gap switches on both circuits. By applying a generalized self-filtering unstable resonator to the oscillator and injecting the laser beam into the single pass amplifier, an output beam of 105 mJ, with a brightness of 5.5×10¹³ W cm^–2Sr^–1 has been obtained. Moreover, by applying a pulse-forming network in one discharging circuit, the duration of the discharge breakdown has been increased and output laser pulses of 40 ns FWHM, and 80 ns base width duration (at 10% points) and of energy 100 mJ are obtained.     

FTIR microspectroscopy of melanocytic skin lesions: a preliminary study

Fourier transform infrared (FTIR) microspectroscopy has been employed to investigate benign (ordinary dermal and Reed nevi), dysplastic and malignant (invasive melanoma) skin lesions through the analysis of spectral changes of melanocytes as well as in the evaluation of the presence of melanin. Hierarchical cluster analysis and principal component analysis led to a satisfactory separation of malignant from dysplastic and normal melanocytes. Also, on enlarging the clustering with spectra from Reed and dermal nevi, the multivariate analysis segregated well the spectral data into discrete clusters, allowing the obtaining of reliable average spectra for analysis at the molecular level of the main groups or components responsible for the biological and biochemical changes. The most significant spectral characteristics appear to be related to differences in secondary protein structures, in nucleic acid conformation, in intra- and intermolecular bonding. In all cases, supervised and unsupervised spectral analyses resulted in satisfactory agreement with histopathological findings.     

Polymer supported calixarene derivative useful for solid-phase synthesis application

A calix[4]arene derivative has been anchored to carboxyl CPG and TentaGel supports by an easily cleavable ester bond and DMT groups allow a simple loading evaluation via UV-vis spectroscopy. The loading of the calixarene on TentaGel resin has also been estimated by HR-MAS NMR experiments. The potential of the polymer supported calixarenes (9 and 10) in solid phase synthesis has been tested by condensation of four thymine nucleotide units onto the upper rim of the calix[4]arene skeleton.