A Ferrofluid with Surface Modified Nanoparticles for Magnetic Hyperthermia and High ROS Production

A ferrofluid with 1,2-Benzenediol-coated iron oxide nanoparticles was synthesized and physicochemically analyzed. This colloidal system was prepared following the typical co-precipitation method, and superparamagnetic nanoparticles of 13.5 nm average diameter, 34 emu/g of magnetic saturation, and 285 K of blocking temperature were obtained. Additionally, the zeta potential showed a suitable colloidal stability for cancer therapy assays and the magneto-calorimetric trails determined a high power absorption density. In addition, the oxidative capability of the ferrofluid was corroborated by performing the Fenton reaction with methylene blue (MB) dissolved in water, where the ferrofluid was suitable for producing reactive oxygen species (ROS), and surprisingly a strong degradation of MB was also observed when it was combined with H₂O₂. The intracellular ROS production was qualitatively corroborated using the HT-29 human cell line, by detecting the fluorescent rise induced in 2,7-dichlorofluorescein diacetate. In other experiments, cell metabolic activity was measured, and no toxicity was observed, even with concentrations of up to 4 mg/mL of magnetic nanoparticles (MNPs). When the cells were treated with magnetic hyperthermia, 80% of cells were dead at 43 °C using 3 mg/mL of MNPs and applying a magnetic field of 530 kHz with 20 kA/m amplitude.     

Syntheses and Study of New 2-Hydroxy-5,6-Dihydro-2H-1,4-Oxazines by NMR and X-ray Crystallography

The preparation of six new 2-hydroxy-5,6-dihydro-2H-[1,4]-oxazines and four oxazino-oxazine type structures is described. The structures of four of these compounds were established by X-ray crystallographic analyses.     

One-dimensional polymers containing strictly collinear metal ions: synthesis and XRPD characterization of homoleptic binary metal pyrazolates

The synthesis of a number of 3d transition metal binary pyrazolates in microcrystalline form, thus suitable for a full XRPD characterization, has been pursued. The crystal and molecular structures of the Fe(pz)3, Co(pz)2, Co(pz)3, and Ni(pz)2 polymers, together with the few congeners reported in the recent literature, show that these species tend to afford highly crystalline materials where strictly collinear chains of metal atoms are present. Depending on the synthetic strategy used, Ni(pz)2 has been found to crystallize as two different alpha (orthorhombic) and beta (monoclinic) phases, possessing nearly identical intramolecular features. Data for each compound follow. Fe(pz)3: C9H9FeN6, hexagonal, P63/m, a = 9.1745(3) A, c = 7.2191(4) A, Z = 2. Co(pz)2: C6H6CoN4, orthorhombic, Ibam, a = 7.5239(5) A, b = 14.3461(9) A, c = 7.4331(5) A, Z = 4. Co(pz)3: C9H9CoN6, hexagonal, P63/m, a = 9.1966(3) A, c = 7.1051(3) A, Z = 2. Alpha-Ni(pz)2: C6H6N4Ni, orthorhombic, Cmcm, a = 16.6758(11) A, b = 6.4872(4) A, c = 6.9423(6) A, Z = 4. Beta-Ni(pz)2: C6H6N4Ni, monoclinic, P21/m, a = 9.967(2) A, b = 6.975(1) A, c = 6.016(1), A, beta = 98.50(1)degrees, Z = 2. The thermal stability and the detailed structural properties of these model compounds have been evaluated, in the light of the technologically relevant crystal phases (the well-known metal-diazolates showing reversible spin-crossover or spin-transition behavior) obtainable upon doping, magnetic dilution, and ring substitution (in the 4-position).     

Aggregation behavior of tetrakis(4-sulfonatophenyl)porphyrin in AOT/water/decane microemulsions

AOT/water/decane microemulsions have been used to entrap the water-soluble 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS4). Quasi-elastic light scattering technique has confirmed the confinement of the porphyrin and its various aggregates into the inner water pool. Various species have been detected as function of the size of the microemulsions, concentration of the porphyrin, pH, and aging of the solutions by using a combination of UV-vis absorption, steady fluorescence emission, fluorescence lifetime measurements, and time-resolved fluorescence anisotropy. Under neutral pH conditions, the porphyrin is present as the free base monomer (S414) in the inner water compartment, and it is free to rotate when the size of the droplet is large enough and the porphyrin concentration is low. On increasing the concentration and/or decreasing the microemulsion size, a H-dimer of the free base (S406) is prevalently formed. Aging both the S414 and S406 species leads to the formation of a new species (S424), which has been postulated as a H-type dimer of the diacid porphyrin. On decreasing the pH, the species S414 and S406 almost instantaneously convert into the diacid porphyrin, which is monomeric (S434). This latter is an intermediate in the eventual formation of J-aggregated TPPS4 (S490). A marked stability has been observed for the S424 species, which do not interconvert on changing the pH of the bulk aqueous phase.     

Improved solid-phase microextraction device for use in on-line immunoaffinity capillary electrophoresis

A simple solid-phase microextraction device was fabricated for use in on-line immunoaffinity capillary electrophoresis (CE). The device, designed in the form of a four-part cross-shaped or cruciform configuration, includes a large-bore tube to transport samples and washing buffers and a small-bore fused-silica capillary for separation of analytes. At the intersection of the transport and separation tubes, a small cavity was fabricated, termed the analyte concentrator-microreactor, which contains four porous walls or semipermeable membranes (one for each inlet and outlet of the tubes) permitting the confinement of beads or suitable microstructures. The surface of the beads in the analyte concentrator carried a molecular recognition adsorbing chemical or affinity ligand material. The improved cruciform configuration of the analyte concentrator-microreactor device, designed for use in on-line immunoaffinity CE, enables it to specifically trap, enrich, and elute an analyte from any biological fluid or tissue sample extract without any sample pretreatment except filtration, centrifugation, and/or dilution allowing the separation and characterization of target analyte(s) with improved speed, sensitivity, and lower cost than existing techniques. As a model system, Fab' fragments derived from a purified immunoglobulin G (IgG) antibody were covalently bound to controlled-porosity glass and used as constituents of the analyte-microreactor device. The high-specificity polyclonal antibodies employed in these experiments were individually raised against the acidic nonsteroidal anti-inflammatory drugs ibuprofen and naproxen, and the neuropeptides angiotensin II, and neurotensin. These compounds, which were present in simple and complex matrices were captured by and eluted from the analyte concentrator-microreactor using a 50 mM sodium tetraborate buffer solution, pH 9.0, followed by a 100 nL plug of 300 mM glycine buffer, pH 3.4. Two analyte concentrators were tested independently: one containing Fab' fragments derived from antibodies raised against ibuprofen and naproxen; the other containing Fab' fragments derived from antibodies raised against angiotensin II and neurotensin. Each resulting electropherogram demonstrated the presence of two eluted materials in less than 20 min. Immunoaffinity CE performed in a cruciform structure was simpler and faster than previously reported in the literature using on-line microextraction devices designed in a linear format. The new concentration-separation system operated consistently for many runs, maintaining reproducible migration times and peak areas for every analyte studied.     

Synthesis and ab-initio XRPD structure of group 12 imidazolato polymers

Two new 3D homoleptic binary imidazolates, Cd(im)2 and Hg(im)2 (Him = imidazole), as well as [Hg(im)]NO3, containing 1D polycations of [Hg(im)]n(n+) formulation, have been prepared and characterized by ab-initio XRPD methods.     

Interaction between ketopantolactone and chirally modified Pt investigated by attenuated total reflection IR concentration modulation spectroscopy

The combination of ATR-IR and modulation spectroscopy allowed for the study of the interaction of ketopantolactone with Pt/Al2O3 films chirally modified by cinchonidine under hydrogenation conditions. The spectra reveal a significant influence of ketopantolactone on the adsorption of the modifier and indicate a N-H-O hydrogen bond between modifier and reactant. The latter was corroborated by a comparative study with N-methyl cinchonidine chloride modified Pt/Al2O3.     

DFT study of NH3 dissociation on Si(1 1 1)-7 × 7. The role of intermolecular interactions

The adsorption of NH₃ molecule on the Si(1 1 1)-7 × 7 surface modelled with a cluster has been studied using density functional theory (DFT). The results indicate the existence of a precursor state for the non-dissociative chemisorption. The active site for the molecular chemisorption is the adatom; while the NH₃ molecule adsorbs on the Si restatom via this preadsorbed state, the adsorption on the Si adatom is produced practically without an energy barrier. The ammonia adsorption on the adatom induces an electron transfer from the dangling bond of this atom to the dangling bond of the adjacent Si restatom, hindering this site for the adsorption of a second NH₃ incoming molecule. However, this second molecule links strongly by means of two H-bonds. The dissociative chemisorption process was studied considering one and two ammonia molecules. For the dissociation of a lonely NH₃ molecule an energy barrier of ∼0.3 eV was calculated, yielding NH₂ on the adatom and H on the restatom. When two molecules are adsorbed, the NH₃-NH₃ interaction yields the weakening of a N-H bond of the ammonia molecule adsorbed closer the Si surface. As a consequence, the dissociation barrier practically disappears. Thus, the presence of a second NH₃ molecule at the adatom-restatom pair of the Si(1 1 1)-7 × 7 surface makes the dissociative reaction self-assisted, the total adsorption process elapsing with a negligible activation barrier (less than 0.01 eV).