Critical temperature oscillations and reentrant superconductivity due to the FFLO like state in F/S/F trilayers

Ferromagnet/Superconductor/Ferromagnet (F/S/F) trilayers, in which the establishing of a Fulde‐Ferrell Larkin‐Ovchinnikov (FFLO) like state leads to interference effects of the superconducting pairing wave function, form the core of the superconducting spin valve. The realization of strong critical temperature oscillations in such trilayers, as a function of the ferromagnetic layer thicknesses or, even more efficient, reentrant superconductivity, are the key condition to obtain a large spin valve effect, i.e. a large shift in the critical temperature. Both phenomena have been realized experimentally in the Cu₄₁Ni₅₉/Nb/Cu₄₁Ni₅₉ trilayers investigated in the present work.     

Synthesis of carbon nanotubes by CVD: Effect of acetylene pressure on nanotubes characteristics

The effect of acetylene partial pressure on the structural and morphological properties of multi-walled carbon nanotubes (MWCNTs) synthesized by CVD on iron nanoparticles dispersed in a SiO₂ matrix as catalyst was investigated. The general growing conditions were: 110 cm³/min flow rate, 690 °C synthesis temperature, 180 Torr over pressure and two gas compositions: 2.5% and 10% C₂H₂/N₂. The catalyst and nanotubes were characterized by HR-TEM, SEM and DRX. TGA and DTA were also carried out to study degradation stages of synthesized CNTs. MWCNTs synthesized with low acetylene concentration are more regular and with a lower amount of amorphous carbon than those synthesized with a high concentration. During the synthesis of CNTs, amorphous carbon nanoparticles nucleate on the external wall of the nanotubes. At high acetylene concentration carbon nanoparticles grow, covering all CNTs’ surface, forming a compact coating. The combination of CNTs with this coating of amorphous carbon nanoparticles lead to a material with high decomposition temperature.     

Sorption of selenium(IV) and selenium(VI) onto magnetite

In this work, we have studied the sorption of selenium (⁷⁹Se is one of the main radionuclides in a spent nuclear fuel repository) on magnetite (Fe₃O₄), a mineral present in the near-field of a nuclear waste repository that might represent an important retardation factor for the mobility of many radionuclides.The sorption of both Se(IV) and Se(VI) onto magnetite has been fitted by a non-competitive Langmuir isotherm with Γ_max = (3.13 ± 0.07) × 10⁻⁶ mol m⁻² and K_L = (1.19 ± 0.07) × 10⁶ dm³ mol⁻¹ for Se(IV) and Γ_max = (3.5 ± 0.2) × 10⁻⁶ mol m⁻² and K_L = (3.0 ± 0.1) × 10⁵ dm³ mol⁻¹ for Se(VI).The variation of the sorption of selenium with pH has been modeled using the Triple Layer Surface Complexation Model and the equilibrium constants between selenium and magnetite have been obtained using the FITEQL program. For the case of Se(IV), the best fitting has been obtained using two inner-sphere complexes, FeOHSeO₃²⁻ and FeHSeO₃, while for Se(VI), the best fitting has been obtained considering only an outer-sphere complex, FeOH₂⁺SeO₄²⁻.The surface complexation reactions derived in this work are in agreement with those stated by other authors for sorption of Se(IV) and Se(VI) on hydrous iron oxides.     

Purkinje imaging system to measure anterior segment scattering in the human eye

We present an instrument based on Purkinje imaging that permits the objective measurement of the amount of scattering associated with the eye's anterior segment, avoiding the contribution from the retina. The experimental system records the fourth Purkinje image, and adequate processing is used to compute a parameter that quantifies the scattering. The method was first tested in an artificial eye and later in normal young eyes wearing customized contact lenses that induced different amounts of scatter. We were able to detect scattering increments, which indicates that this technique may be used as an objective tool to quantify the level of scattering in the anterior segment of the living human eye. The future use of this technique in clinical environments might help to estimate the level of corneal haze in eyes undergoing refractive surgery or/and scattering within the lens during cataract development.     

Nonlinear mechanical behavior of piezocomposites for ultrasonic transducers

A comparative study is carried out between the nonlinear behavior of a composite and the piezoceramic used to obtain it. This characterization is necessary for using the composite in power transducer applications. A study of the losses and the resonator stiffness variations has also been done. Both these effects, as well as the possibility of the frequency hysteresis, show different behavior in the composites, since the increases in the ceramics are different from those in the composites. In this study two measurement methods are used: principally the motional impedance increase with the motional current measurements. The results obtained are normalized in order to make them independent of the resonator size, and thus make the comparison between the composite and the ceramic easier. The figure of the mechanical loss tangent tan delta m versus the mean strain shows that the losses can be greater in the ceramic than in the composite for soft ceramics. The dependence behavior of the losses and stiffness variations versus the mean strain is studied for both resonators.     

Absence of dc-conductivity in lambda-DNA

The electrical conductivity of biomaterials on a molecular scale is of fundamental interest in the life sciences. We perform first principles electronic structure calculations, which clearly indicate that lambda-DNA chains should present large resistance values. We also present two direct procedures to measure electrical currents through DNA molecules adsorbed on mica. The lower limit for the resistivity is 10(6) Omega . cm, in agreement with our calculations. We also show that low energy electron bombardment induces a rapid contamination and dramatically affects the measured conductivity, thus providing an explanation to recent reports of high DNA conductivity.     

Effect of heat treatment on the mechanical and microstructural characterization of Mg-AZ91E/TiC composites

Mg-AZ91E/TiC_p composite was fabricated using a spontaneous infiltration technique at 950 °C under an argon atmosphere. The composites produced have 37 vol.% of metal matrix and 63 vol.% of TiC-like reinforcement. The obtained composites were subsequently solution heat-treated at 413 °C during 24 h, cold water quenched, and subsequently artificially aged at 168 and 216 °C during 16 h in an argon atmosphere. Effect of heat treatment on the microstructure and mechanical properties was evaluated. Microstructural characterization was analyzed using different techniques such as X-ray diffraction (XRD) and scanning electron microscopy (SEM). Interface between matrix and reinforcement was examined using transmission electron microscopy (TEM), and mechanical properties were evaluated by measuring the elastic modulus and hardness. Mg, TiC, Al, and Mg₁₇Al₁₂ phases through XRD were detected. Meanwhile, using TEM analysis in heat-treated composites MgAl₂O₄, MgO, and Al₂O₃ were identified. The as-fabricated composite have elastic modulus and hardness of 162 GPa and 316 Hv, respectively. After solution heat treatment and aging at 168 °C during 12 h, the composites reaches values of 178 GPa and 362 Hv for the elastic modulus and hardness, respectively. Time of aging was correlated with measures of elastic modulus and hardness.     

Mössbauer, X-ray diffraction and magnetization studies of Fe–Mn–Al–Nb alloys prepared by high energy ball milling

Fe₆₀Mn₁₀Al₂₀Nb₁₀, (Fe₆₀Mn₁₀Al₃₀)₉₅Nb₅ and (Fe₆₀Mn₁₀Al₃₀)₉₀Nb₁₀ ball milled powdered alloys were investigated using X-ray diffraction, Mössbauer spectrometry, thermomagnetic (TGM) and magnetization measurements. We studied the influence of Nb content and of different milling times on the structural and magnetic properties. Two main features can be concluded: (1) the FeAlMn induces a BCC phase whatever the Nb content is, and (2) as both increasing Nb content and milling time give rise to an highly disordered state in conjunction with a decrease of the ferromagnetic behavior.     

Allometric scaling laws of metabolism

One of the most pervasive laws in biology is the allometric scaling, whereby a biological variable Y is related to the mass M of the organism by a power law, Y=Y₀M^b, where b is the so-called allometric exponent. The origin of these power laws is still a matter of dispute mainly because biological laws, in general, do not follow from physical ones in a simple manner. In this work, we review the interspecific allometry of metabolic rates, where recent progress in the understanding of the interplay between geometrical, physical and biological constraints has been achieved.

For many years, it was a universal belief that the basal metabolic rate (BMR) of all organisms is described by Kleiber's law (allometric exponent b=3/4). A few years ago, a theoretical basis for this law was proposed, based on a resource distribution network common to all organisms. Nevertheless, the 3/4-law has been questioned recently. First, there is an ongoing debate as to whether the empirical value of b is 3/4 or 2/3, or even nonuniversal. Second, some mathematical and conceptual errors were found these network models, weakening the proposed theoretical arguments. Another pertinent observation is that the maximal aerobically sustained metabolic rate of endotherms scales with an exponent larger than that of BMR. Here we present a critical discussion of the theoretical models proposed to explain the scaling of metabolic rates, and compare the predicted exponents with a review of the experimental literature. Our main conclusion is that although there is not a universal exponent, it should be possible to develop a unified theory for the common origin of the allometric scaling laws of metabolism.