Influence of some sugars on the thermal,rheological and morphological properties of “pinhão” starch

When starch is incorporated into puddings, desserts, and other foods containing sugar as the main ingredient, it will have an effect on the gelatinisation temperature and pasting properties. Many studies have been undertaken to investigate the effect of several sugars in foods and starches, as well as their physicochemical and functional properties. These studies have verified the significant influence on these properties, which are dependent on the nature of sugar and of starch. In this study, pinhão starch was extracted in the laboratory and was added, stirring for 60 min, to solutions at 1 % of each of the following sugars: fructose, glucose, sucrose, and 0.5 % fructose and 0.5 % glucose. After this time, the slurry was filtered, washed, dried at 40 °C and kept in a desiccator over anhydrous calcium chloride until constant mass. The effects of each sugar on the surface of the pinhão starch granules were observed using the non-contact method of atomic force microscopy, whereby it was possible to verify a decrease in the average diameter and an increase in the average roughness. X-ray diffractometry made it possible to evaluate the degree of relative crystallinity, which was proportional to the roughness and inversely proportional to the gelatinisation enthalpy (ΔH), which was studied by differential scanning calorimetry.     

Photodynamic Therapy Efficacy Enhanced by Dynamics: The Role of Charge Transfer and Photostability in the Selection of Photosensitizers

Progress in the photodynamic therapy (PDT) of cancer should benefit from a rationale to predict the most efficient of a series of photosensitizers that strongly absorb light in the phototherapeutic window (650–800 nm) and efficiently generate reactive oxygen species (ROS=singlet oxygen and oxygen‐centered radicals). We show that the ratios between the triplet photosensitizer–O₂ interaction rate constant (k_D) and the photosensitizer decomposition rate constant (k_d), k_D/k_d, determine the relative photodynamic activities of photosensitizers against various cancer cells. The same efficacy trend is observed in vivo with DBA/2 mice bearing S91 melanoma tumors. The PDT efficacy intimately depends on the dynamics of photosensitizer–oxygen interactions: charge transfer to molecular oxygen with generation of both singlet oxygen and superoxide ion (high k_D) must be tempered by photostability (low k_d). These properties depend on the oxidation potential of the photosensitizer and are suitably combined in a new fluorinated sulfonamide bacteriochlorin, motivated by the rationale.     

Implementation of the quality management system at the Laboratory of Radiological Protection and Safety (LPSR) in Portugal

The paper describes the activities carried out for the implementation of the quality management system (QMS) at the Laboratory of Radiological Protection and Safety (LPSR) in Portugal in order to achieve the management and technical requirements of ISO/IEC 17025:2005 and to get the accreditation for ten tests. The implementation of the QMS based on this international standard allowed LPSR to improve the methods, to identify problems, to implement preventive and corrective actions, to generate valid results and to achieve a stable level of high-quality output recognized by an independent body in the scope of waters, metrology, radiation and radiochemistry.     

Characterization of Biocatalysts Prepared with Thermomyces lanuginosus Lipase and Different Silica Precursors,Dried using Aerogel and Xerogel Techniques

The use of lipases in industrial processes can result in products with high levels of purity and at the same time reduce pollutant generation and improve both selectivity and yields. In this work, lipase from Thermomyces lanuginosus was immobilized using two different techniques. The first involves the hydrolysis/polycondensation of a silica precursor (tetramethoxysilane (TMOS)) at neutral pH and ambient temperature, and the second one uses tetraethoxysilane (TEOS) as the silica precursor, involving the hydrolysis and polycondensation of the alkoxide in appropriate solvents. After immobilization, the enzymatic preparations were dried using the aerogel and xerogel techniques and then characterized in terms of their hydrolytic activities using a titrimetric method with olive oil and by the formation of 2-phenylethyl acetate in a transesterification reaction. The morphological properties of the materials were characterized using scanning electron microscopy, measurements of the surface area and pore size and volume, thermogravimetric analysis, and exploratory differential calorimetry. The results of the work indicate that the use of different silica precursors (TEOS or TMOS) and different drying techniques (aerogel or xerogel) can significantly affect the properties of the resulting biocatalyst. Drying with supercritical CO₂ provided higher enzymatic activities and pore sizes and was therefore preferable to drying, using the xerogel technique. Thermogravimetric analysis and differential scanning calorimetry analyses revealed differences in behavior between the two biocatalyst preparations due to the compounds present.     

Derivatization-free determination of aminoglycosides by CZE–UV in pharmaceutical formulations

Aminoglycosides are a relevant class of antibiotics widely used by medics and veterinaries. There are a variety of reasons that make their determination relevant, such as quality control, environment and food contamination assessment, drug-release studies, among others. The lack of a chromophore makes aminoglycoside spectrophotometric detection particularly challenging, often requiring derivatization. In this work, an indirect detection method, making use of imidazole as a probe, applying CZE was successfully tested. It did not require derivatization, which simplified the sample preparation. Suitable figures of merit were obtained; recoveries between 95 and 105%, adequate repeatability and precision, correlation coefficients (r) above 0.998, and limits of detection (LODs) of 3.2 and 11 mg/L for gentamicin and paromomycin, respectively. As a proof-of-concept, it was also applied in a simple controlled release experiment that was well fitted using the Hill equation.     

A comparative multi-reference configuration interaction study of the low-lying states of two thione isomers of thiophenol

Multi-reference configuration interaction, MR-CI (including extensivity corrections, named +Q), calculations were performed on the S₀–S₃ states of cyclohexa-2,4-diene-1-thione (thione 24 ) and cyclohexa-2,5-diene-1-thione (thione 25 ), which are thione isomers of thiophenol. Several types of uncontracted MR-CIS and MR-CISD wavefunctions were employed, comprising MR-CI expansions as large as ~365 × 10⁶ configuration state functions. The nature of the studied excited states was characterized. Vertical excitation energies (ΔE) and oscillator strengths (f) were computed. The most intense transitions (S₀ → S₂ for 24 and S₀ → S₃ for 25 ) did not change with the wavefunction, although a variation as large as ~1 eV was obtained for the S₃ state of 24 , at the highest (MR-CI+Q) level. On the other hand, ΔE changed at most by ~0.56 eV for 25 as the wavefunction changes, at the same level. The S₁ state of both thiones was found to have nπ* character and is in the visible region. For 24 , S₂ and S₃ are ππ* and nπ* states, respectively, while for 25 the reverse order is obtained. S₂ and S₃ are in the range ~3.5 to 5.2 eV, again at the highest level. It is the first time that the excited states of the title molecules are studied. The computed results agree with the experimental onset of photoreactions of thiones 24 and 25 found by Reva et al (Phys. Chem. Chem. Phys., 2015 , 17, 4888).     

Sodium sulfate influence on the electrodeposition of MnO2 films for application in Supercapacitors

Journal of Solid State Electrochemistry - Manganese dioxide (MD) was synthesized by cyclic voltammetry using 0.5 mol L−1 MnSO4·6H2O as the precursor solution, with and...     

Determination of phenolic compounds,in vitro antioxidant activity and characterization of secondary metabolites in different parts of Passiflora cincinnata by HPLC-DAD-MS/MS analysis

Abstract

Ethanol extracts of different parts of Passiflora cincinnata were obtained by maceration. The total phenolic and flavonoid contents were evaluated. The antioxidant activities were determined by β-carotene-linoleic acid bleaching test, 2,2-diphenyl-1-picrylhydrazil (DPPH), and 2,2’-azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radical scavenging. The crude ethanol stem extract showed the highest amount of total polyphenols (45.53?mg gallic acid equivalent/g) while the highest total flavonoid contents (1.42?mg of quercetin equivalent/g) were observed in the leaf extract. The lowest IC₅₀ (25.65?μg/ml) by the DPPH method was observed for the stem extract. The ABTS method showed a significant antioxidant activity for all investigated extracts. The secondary metabolite composition of ethanol extracts was assessed by HPLC-DAD-MS/MS analysis, leading to the identification of fourteen secondary metabolites in P. cincinnata extracts. These results showed the potentiality of this species as a source of phenolic compounds and antioxidants.     

Novel Crash Sled with a Translating Support Mass

Background

A novel crash sled has been developed with a translating support incorporating transducers that allow multiple methods of measuring energy absorption to fully characterize the dynamic crush response of composite components.

Objective

The main goal of the current investigation was to demonstrate functionality, repeatability, and accuracy of crush testing using a crash sled with a translating support mass.

Methods

A semi-automated algorithm for data reduction was developed based on impact mechanics principles. A preliminary set of tests was initially conducted using aluminum honeycomb specimens with a specified stable crushing force to quantify the accuracy and repeatability of the crush data. Following the success of these tests, triaxially-braided fiber-reinforced polymer (FRP) specimens were evaluated.

Results

Crush tests with the aluminum honeycomb specimens showed excellent outcomes for all three specimens. These data provided close agreement with cumulative energy absorption between individual instruments and stable crushing forces at expected values. For the FRP specimens, specific energy absorption (SEA) and force-displacement curves were successfully measured; however, data from the translating support mass accelerometer were excluded from the dataset due to clipping. The SEA of the corrugated specimens was greater than the SEA for the C-channel specimens at both test speeds.

Conclusions

The crash sled functionality was verified, the specimen geometry was found to contribute more to SEA than the impact speed in the speed range tested, and the support mass accelerometer will be upgraded to prevent clipping in future tests.