Unexpected Isolation of 4‐Isothiocyanatomethylene‐4H‐pyridine‐1‐carboxylic Acid Ethyl Ester as Potential Template in Organic Synthesis

The synthesis of 4‐isothiocyanatomethyl‐pyridine 4 in 36% yield by Hasegawa and Kotani (Japanese patent 49088878, 1974) has spurred us to investigate this preparation in detail. In addition to this compound, 4‐isothiocyanatomethylene‐4H‐pyridine‐1‐carboxylic acid ethyl ester 3 can be isolated. The synthesis of both compounds 3 and 4 were optimized to 75% and 50% yield respectively. Reaction of compound 3 with methylamine gave thiourea derivatives 5, the same product obtained on reacting 4‐isothiocyanatomethyl‐pyridine 4 with methylamine. We succeed in adjusting the reaction conditions to obtain high yield either from compound 3 or isothiocyanate derivatives 4.     

Structure and Polymorphism of M(thd)3 (M = Al,Cr, Mn,Fe, Co,Ga, and In)

Formation, crystal structure, polymorphism, and transition between polymorphs are reported for M(thd)₃, (M = Al, Cr, Mn, Fe, Co, Ga, and In) [(thd)^– = anion of H(thd) = C₁₁H₂₀O₂ = 2, 2, 6, 6‐tetramethylheptane‐3, 5‐dione]. Fresh crystal‐structure data are provided for monoclinic polymorphs of Al(thd)₃, Ga(thd)₃, and In(thd)₃. Apart from adjustment of the M–O_k bond length, the structural characteristics of M(thd)₃ complexes remain essentially unaffected by change of M. Analysis of the M–O_k, O_k–C_k, and C_k–C_k distances support the notion that the M–O_k–C_k–C_k–C_k–O_k– ring forms a heterocyclic unit with σ and π contributions to the bonds. Tentative assessments according to the bond‐valence or bond‐order scheme suggest that the strengths of the σ bonds are approximately equal for the M–O_k, O_k–C_k, and C_k–C_k bonds, whereas the π component of the M–O_k bonds is small compared with those for the O_k–C_k, and C_k–C_k bonds. The contours of a pattern for the occurrence of M(thd)₃ polymorphs suggest that polymorphs with structures of orthorhombic or higher symmetry are favored on crystallization from the vapor phase (viz. sublimation). Monoclinic polymorphs prefer crystallization from solution at temperatures closer to ambient. Each of the M(thd)₃ complexes subject to this study exhibits three or more polymorphs (further variants are likely to emerge consequent on systematic exploration of the crystallization conditions). High‐temperature powder X‐ray diffraction shows that the monoclinic polymorphs convert irreversibly to the corresponding rotational disordered orthorhombic variant above some 100–150 °C (depending on M). The orthorhombic variant is in turn transformed into polymorphs of tetragonal and cubic symmetry before entering the molten state. These findings are discussed in light of the current conceptions of rotational disorder in molecular crystals.     

Emulsions of Heavy Crude Oils. II. Viscous Responses and Their Influence on Emulsion Stability Measurements

The stability of 30 heavy crude oil emulsions was studied in a parallel-plate laboratory coalescer (DC field). Particularly, viscous responses and their influence on the emulsion stability measurements were investigated. In addition to highlighting previous results from the same experimental setup and discussing these based on recent experience, new results at different temperatures and volume fractions of water were presented. A new semi-empirical model for the characteristic time of the destabilization process was presented. The electrical forces were modelled with a point-dipole approximation and the hydrodynamic resistance to droplet transport was modelled with an empirical term including the logarithmic viscosity of the oil phase. The new model clearly performed much better than the previous model, particularly for very viscous crude oils. Studies of the performance of industrial electrocoalescers have showed that simple electrostatic theory can potentially explain complex separation phenomena when the resistance to the coalescence step is reduced by an efficient demulsifier. The ultimate goal is to build a model for both the laboratory setup and the industrial coalescer so that laboratory experiments can be used to predict the behavior of the industrial process.     

INTERACTIONS BETWEEN POLY(ETHYLENE OXIDE) COATED SURFACES AND BETWEEN SUCH SURFACES AND PROTEINS

Surfaces coated with poly(ethylene oxide) containing nonionic polymers are of interest in medical applications due to, among other things, the low adsorption of proteins on such surfaces. In this paper we have studied the interfacial properties of surfaces coated with PEO by measuring the forces acting between two such surfaces in water and across a protein solution as well as between one such surface and a surface carrying adsorbed proteins. One type of surface coating was a graft copolymer of poly(ethylene imine) and poly(ethylene oxide) where the cationic poly(ethylene imine) group anchored the polymer to negatively charged mica surfaces. Three different ways to prepare this coating was used and compared. It was found that this coating was not stable in the presence of lysozyme, a small positively charged protein, when the PEO graft density was low. The other type of coating was obtained by adsorbing ethyl(hydroxyethyl)-cellulose onto hydrophobised mica surfaces. The driving force for adsorption is in this case the hydrophobic interaction between nonpolar segments of the polymer and the surface. The EHEC coating was stable in the presence of lysozyme and the interactions between adsorbed layers of lysozyme and EHEC coated surfaces are purely repulsive due to long-range steric forces.     

Influence of Interfacial Tension on Seeded Calcium Carbonate Scale Precipitation: Effect of Adsorbed Asphaltenes

Clay particles with adsorbed asphaltenes, which are commonly found in produced water, have been used as seed particles during precipitation of calcium carbonate in order to determine whether such particles may influence the kinetics of precipitation. The results show that the presence of the adsorbed asphaltenes accelerates the precipitation, and there is also a significant difference between different types of adsorbed asphaltenes. The adsorption of asphaltenes at the seed surface leads to a significant increase in the interfacial tension between the seed surface and the aqueous solution, and calcium carbonate therefore precipitates at the seed surface in order to reduce this high interfacial tension.     

Analysis of Crude Oils by Frequency Domain Spectroscopy—Effect of Composition and Physical Properties on Conductivity and Dielectric Response

The dielectric properties and the composition of fourteen light to heavy crude oils have been analyzed. Frequency domain spectroscopy (FDS) has been used in order to determine their dielectric response in the frequency range 0.01 to 1000 Hz. For all the crude oils, over the whole frequency range under study, dielectric loss, ?″, shows a linear dependence of frequency indicating a pure direct current (DC) conductivity. As temperature is gradually increased, the dielectric loss, ?″, increases as well, showing a strong temperature dependence. The storage modulus, ?′, shows an explicit behaviour at low frequency that could be due to adsorption of oil components onto the electrodes. We tried to correlate some physical and chemical properties (density, viscosity, SARA, TAN, water content) of the studied crude oils with their conductivity measured at various temperatures. No correlation was found and different hypothesis are suggested by the authors to explain this phenomenon.     

Orthoconic antiferroelectric liquid crystals

The ubiquitous liquid crystal display (LCD) is based on nematic liquid crystals (LCs) and has during 40 years developed from simple few digit displays into high-resolution flat-panel displays. A last and very important step towards the present TVs was the combination with thin film transistors that also led to the introduction of several new switching modes. Despite the enormous success of this technology, there is presently a renewed interest in LCs with faster electrooptic response, especially for future 3D vision display systems and possibly for field-sequential-colour (FSC) generation displays. Here, I focus on the so-called orthoconic antiferroelectric LCs (OAFLCs), which can provide the fast switching of conventional antiferroelectric LCs, but combined with a potentially much higher optical contrast. The reason is that the dark state of orthconic materials has a homeotropic optic axis, which makes the extinction ideally complete between crossed polarisers and independent of in-plane alignment fluctuations characteristic of all antiferroelectric LCs. The basic features and device physics issues of orthoconic LCs are reviewed and the most important remaining challenges to be met in terms of materials development are discussed in this article. Furthermore, a few examples of new applications made possible with the use of present and future orthoconic materials are given.     

Morphological investigation of polylactide/microfibrillated cellulose composites

Optical microscopy and transmission electron microscopy have been used to investigate the morphology of polylactide (PLA)/microfibrillated cellulose (MFC) composites prepared by: compression molding of wet-comingled MFC and PLA latex or powder, twin-screw extrusion of the wet-comingled compounds, and solvent mixing of PLA with MFC or acetylated MFC. Compression molding of wet-comingled MFC and PLA latex or powder compounds resulted in a cellular MFC network, whereas solvent-cast films showed a more uniform dispersion of MFC fibers. Somewhat lower aggregate diameters observed in the acetylated MFC were assumed to be due to decreased MFC hydrophilicity and improved chemical affinity with the PLA matrix. The MFC networks in the commingled compounds were severely disrupted after twin-screw extrusion. This confirmed the limited deformability of the networks inferred from the extensive syneresis during the initial compression molding step, and accounted for substantial losses in stiffness reinforcement by the MFC after extrusion.