Synthesis and properties of magnetic zeolite with good magnetic stability from fly ash

Magnetic fly ash-based zeolites (MFZ) with good magnetic stability were in situ synthesized from fly ash (FA) modified by Fe₃O₄ after alkali fusion, hydrothermal treatment, and followed by reduction. The effects of the synthesis parameters of MFZ, such as the loading amount of Fe₃O₄, NaOH/FA ratio, and SiO₂/Al₂O₃ molar ratio, were investigated as well as its adsorption capacity for Cu²⁺ ions. The results indicated that MFZ were composed of zeolite A and sodalite phases and possessed excellent magnetic property. Fe₃O₄ nanoparticles were encapsulated in or covered below the as-synthesized zeolites, resulting in a good magnetic stability of MFZ. The magnetic property and crystal type of MFZ could be adjusted by controlling the synthesis parameters. High loading amount of Fe₃O₄ hindered the leaching of active SiO₂ from FA and then limited the formation of zeolite A. MFZ exhibited a high adsorption capacity for Cu²⁺ ions and the latter increased with the amount and crystallinity of zeolite A in MFZ.

Open image in new window

     

Phenoxazine Polymer-based p-type Positive Electrode for Aluminum-ion Batteries with Ultra-long Cycle Life

Aluminum-ion batteries (AIBs) are a promising candidate for large-scale energy storage due to the abundant reserves, low cost, good safety, and high theoretical capacity of Al. However, AIBs with inorganic positive electrodes still suffer from sluggish kinetics and structural collapse upon cycling. Herein, we propose a novel p-type poly(vinylbenzyl-N-phenoxazine) (PVBPX) positive electrode for AIBs. The dual active sites enable PVBPX to deliver a high capacity of 133 mAh g⁻¹ at 0.2 A g⁻¹. More impressively, the expanded π-conjugated construction, insolubility, and anionic redox chemistry without bond rearrangement of PVBPX for AIBs contribute to an amazing ultra-long lifetime of 50000 cycles. The charge storage mechanism is that the AlCl₄⁻ ions can reversibly coordinate/dissociate with the N and O sites in PVBPX sequentially, which is evidenced by both experimental and theoretical results. These findings establish a foundation to advance organic AIBs for large-scale energy storage.     

Unraveling the Structure Transition and Peroxidase Mimic Activity of Copper Sites over Atomically Dispersed Copper-Doped Carbonized Polymer Dots

The lack of systematic structural resolution makes it difficult to build specific transition-metal-atom-doped carbonized polymer dots (TMA-doped CPDs). Herein, the structure-activity relationship between Cu atoms and CPDs was evaluated by studying the peroxidase-like properties of Glu−Cu−CPDs prepared by using copper glutamate (Glu) with a Cu−N₂O₂ initial structure. The results showed that the Cu atoms bound to Glu−Cu−CPDs in the form of Cu−N₂C₂, indicating that Cu−O bonds changed into Cu−C bonds under hydrothermal conditions. This phenomenon was also observed in other copper-doped CPDs. Moreover, the carboxyl and amino groups content decreased after copper-atom doping. Theoretical calculations revealed a dual-site catalytic mechanism for catalyzing H₂O₂. The detection of intracellular H₂O₂ suggested their application prospects. Our study provides an in-depth understanding of the formation and catalytic mechanism of TMA-doped-CPDs, allowing for the generation specific TMA-doped-CPDs.     

2D Catalysts for CO2 Photoreduction: Discussing Structure Efficiency Strategies and Prospects for Scaled Production Based on Current Progress

Currently, the excessive consumption of fossil fuels is accompanied by massive emissions of CO₂, leading to severe energy shortages and intensified global warming. It is of great significance to develop and use renewable clean energy while reducing the concentration of CO₂ in the atmosphere. Photocatalytic technology is a promising strategy for carbon dioxide conversion. Clearly, the achievement of the above goals largely depends on the design and construction of catalysts. This review is mainly focused on the application of 2D materials for photocatalytic CO₂ reduction. The contribution of synthetic strategies to their structure and performance is emphasized. Finally, the current challenges, and prospects of 2D materials for photoreduction of CO₂ with high efficiency, even for practical applications are discussed. It is hoped that this review can provide some guidance for the rational design, controllable synthesis of 2D materials, and their application for efficient photocatalytic CO₂ reduction.     

Heterogeneous versus Homogeneous Copper(II) Catalysis in Enantioselective Conjugate‐Addition Reactions of Boron in Water

We have developed Cu^II‐catalyzed enantioselective conjugate‐addition reactions of boron to α,β‐unsaturated carbonyl compounds and α,β,γ,δ‐unsaturated carbonyl compounds in water. In contrast to the previously reported Cu^I catalysis that required organic solvents, chiral Cu^II catalysis was found to proceed efficiently in water. Three catalyst systems have been exploited: cat. 1: Cu(OH)₂ with chiral ligand L1 ; cat. 2: Cu(OH)₂ and acetic acid with ligand L1 ; and cat. 3: Cu(OAc)₂ with ligand L1 . Whereas cat. 1 is a heterogeneous system, cat. 2 and cat. 3 are homogeneous systems. We tested 27 α,β‐unsaturated carbonyl compounds and an α,β‐unsaturated nitrile compound, including acyclic and cyclic α,β‐unsaturated ketones, acyclic and cyclic β,β‐disubstituted enones, acyclic and cyclic α,β‐unsaturated esters (including their β,β‐disubstituted forms), and acyclic α,β‐unsaturated amides (including their β,β‐disubstituted forms). We found that cat. 2 and cat. 3 showed high yields and enantioselectivities for almost all substrates. Notably, no catalysts that can tolerate all of these substrates with high yields and high enantioselectivities have been reported for the conjugate addition of boron. Heterogeneous cat. 1 also gave high yields and enantioselectivities with some substrates and also gave the highest TOF (43 200 h^?1) for an asymmetric conjugate‐addition reaction of boron. In addition, the catalyst systems were also applicable to the conjugate addition of boron to α,β,γ,δ‐unsaturated carbonyl compounds, although such reactions have previously been very limited in the literature, even in organic solvents. 1,4‐Addition products were obtained in high yields and enantioselectivities in the reactions of acyclic α,β,γ,δ‐unsaturated carbonyl compounds with diboron 2 by using cat. 1, cat. 2, or cat. 3. On the other hand, in the reactions of cyclic α,β,γ,δ‐unsaturated carbonyl compounds with compound 2 , whereas 1,4‐addition products were exclusively obtained by using cat. 2 or cat. 3, 1,6‐addition products were exclusively produced by using cat. 1. Similar unique reactivities and selectivities were also shown in the reactions of cyclic trienones. Finally, the reaction mechanisms of these unique conjugate‐addition reactions in water were investigated and we propose stereochemical models that are supported by X‐ray crystallography and MS (ESI) analysis. Although the role of water has not been completely revealed, water is expected to be effective in the activation of a borylcopper(II) intermediate and a protonation event subsequent to the nucleophilic addition step, thereby leading to overwhelmingly high catalytic turnover.     

分散固相萃取-气相色谱法测定桔梗中的多种有机氯农药残留量

建立分散固相萃取-气相色谱法测定中药材桔梗中11种有机氯农药的残留量的测定方法。采用Agilent Sampliq QuEChERS分散固相萃取包进行样品处理。色谱条件为:HP-1701弹性石英毛细管色谱柱(30 m×0.32mm,25μm),进样口温度为250℃,检测器为Ni63电子捕获检测器,检测器温度为300℃,不分流进样,程序升温,高纯氮气为载气。8种有机氯农药在0.02～0.2 mg/L范围内与色谱峰面积线性关系良好(r0.999),其检出限范围为0.0015～0.0098 mg/kg,该方法的回收率为82.3%～104.1%,相对标准偏差不大于2.5%(n=5)。     

辉光放电质谱法定量测定重掺晶体硅中替位碳含量

采用辉光放电质谱法测定单晶硅中替位碳含量,通过优化仪器工作条件,得到最佳放电参数.利用低温傅里叶变换红外光谱法对呈梯度的四个单晶硅片中替位碳含量进行赋值,将辉光放电质谱法测得替位碳强度与硅的离子束比与赋值结果作工作曲线,计算得到相对灵敏度因子(RSFcal)为1.19.在优化过的工作条件下,用辉光放电质谱法测未知样,用...     

Exploring of tri-allelic SNPs using pyrosequencing and the SNaPshot methods for forensic application

Tri-allelic single nucleotide polymorphisms (SNPs) are potential forensic markers for DNA analysis. Currently, only a limited number of tri-allelic SNP loci have been proved to be fit for forensic application. In this study, we aimed to develop an effective method to select and genotype tri-allelic SNPs based on both Pyrosequencing (PSQ) and the SNaPshot methods. 50 candidate SNPs were chosen from NCBI's dbSNP database and were analyzed by PSQ. The results revealed that 20 SNPs were tri-allelic and were located on 16 autosomal chromosomes. Then 20 SNP loci were combined in one multiplex polymerase chain reaction to develop a single base extension (SBE)-based SNP-typing assay. A total of 100 unrelated Chinese individuals were genotyped by this assay and allele frequencies were estimated. The total discrimination power was 0.999999999975 and the cumulative probability of exclusion was 0.9937. These data demonstrated that the strategy is a rapid and effective method for seeking and typing tri-allelic SNPs. In addition, the 20 tri-allelic SNP multiplex typing assay may be used to supplement paternity testing and human identification.     

Facile preparation of superhydrophobic copper surface by HNO3 etching technique with the assistance of CTAB and ultrasonication

Superhydrophobic rough structure was prepared on copper wafer via HNO₃ etching technique with the assistance of Cetyltrimethyl Ammonium Bromide (CTAB) and ultrasonication. After modification of 1H,1H,2H,2H-perfluorodecyltriethoxysilane (FDTES), the copper wafer showed stable superhydrophobicity. The morphologies, chemical compositions and hydrophobicity of the substrates were analyzed by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and water contact angle measurement. Dense and spherical micropits appeared on copper wafer after it was etched by 5 M nitric acid with 1.2 mM CTAB under ultrasonication for 20 min. The SEM results indicated that the joint action of CTAB and ultrasonication caused the formation of dense and spherical micropits.     

Modeling Structural Coordination and Ligand Binding in Zinc Proteins with a Polarizable Potential

As the second most abundant cation in human body, zinc is vital for the structures and functions of many proteins. Zinc-containing matrix metalloproteinases (MMPs) have been widely investigated as potential drug targets in a range of diseases ranging from cardiovascular disorders to cancers. However, it remains a challenge in theoretical studies to treat zinc in proteins with classical mechanics. In this study, we examined Zn(2+) coordination with organic compounds and protein side chains using a polarizable atomic multipole based electrostatic model. We find that polarization effect plays a determining role in Zn(2+) coordination geometry in both matrix metalloproteinase (MMP) complexes and in zinc-finger proteins. In addition, the relative binding free energies of selected inhibitors binding with MMP13 have been estimated and compared with experimental results. While not directly interacting with the small molecule inhibitors, the permanent and polarizing field of Zn(2+) exerts a strong influence on the relative affinities of the ligands. The simulation results also reveal the polarization effect on binding is ligand dependent and thus difficult to be incorporated into fixed-charge models implicitly.