Core-shell magnetic molecularly imprinted polymer nanoparticles for the extraction of triazophos residues from vegetables

The authors report on a surface molecular imprinting strategy for synthesizing magnetic and molecularly imprinted core-shell polymer nanoparticles (MMIPs) with a typical size of 320 nm. The triazophos-imprinted polymer shell on 180-nm magnetite particles (modified with 3-methacryloxypropyl trimethoxysilane) was obtained by radical polymerization of ethylene glycol dimethacrylate in the presence of triazophos, this followed by extractive removal of triazophos. The resulting MMIPs possess large binding capacity, high recognition selectivity, and fast binding kinetics for triazophos. They can be easily separated from a solution by using a magnet. These features result in a convenient and selective solid-phase extraction procedure for triazophos prior to its determination by UV spectrometry or by GC analysis. The method was successfully applied to the extraction and clean-up of triazophos residues in spiked homogenates of vegetables with recoveries in the range of 89.2 ~ 99.0%. The detection limits for triazophos by the UV assay and GC assay are 0.93 nM and 0.32 nM, respectively.

Open image in new window

Graphical abstract The core-shell magnetic molecularly imprinted polymer nanoparticles (MMIPs) with a nanoscale triazophos-imprinted polymer shell were prepared by surface imprinting onto the surfaces of 3-methacryloxypropyl trimethoxysilane (MATS) modified Fe₃O₄ magnetic nanoparticles. They were successfully applied for the extraction and clean-up of ultra trace triazophos residues in spiked homogenates of vegetable samples. MMIPs exhibit the larger binding capacity, faster binding kinetics, higher recognition selectivity, good reusability and stability, and excellent magnetic responses.

     

A Re2O7 catalyzed cycloetherification of monoallylic diols

A Re₂O₇ catalyzed cycloetherification of monoallylic diols is described. The reaction features short reaction time, mild reaction conditions and exclusive E selectivity. A wide range of monoallylic alcohols with alkyl or aryl substituents on olefin smoothly undergo ring closure to deliver corresponding oxa-heterocycles. The reaction is also operationally simple and not sensitive to air and moisture.     

Progress in fluorene-based wide-bandgap steric semiconductors

Molecular bulks are favorable for the thermal and morphological stability in organic wide-bandgap semiconducting polymers with potential applications in both information and energy electronics. In this review, we present our progress in the design of fluorene-based bulky semiconductors with a fractal four-element pattern. Firstly, we established one-pot methods to spirofluorenes, especially spiro[fluorene-9,9′-xanthene](SFX) serving as the next-generation spiro-based semiconductors. Secondly, we observed the supramolecular forces at the bulky groups and discovered the supramolecular steric hindrance(SSH) effect on polymorphisms, nanocrystals as well as device performance. Thus, a synergistically molecular attractor-repulsor theory(SMART) was proposed for the control of nanocrystal morphology, thin film phase and morphology. Thirdly, the third possible type of defects has been identified to generate green band(g-band) emission in widebandgap semiconductors by the introduction of molecular strain design of cyclofluorene. Finally, the first bulky polydiarylfluorene with highly crystalline and β conformation was achieved by an attractor-repulsor design of tadpole-shape monomer, which offered an effective platform to fabricate stable wide-bandgap semiconducting devices. All the discoveries offer the solid basis to break through bottlenecks of organic/polymer wide-bandgap semiconductors by the improvements of overall performances.     

Multi-bond network hydrogels with robust mechanical and self-healable properties

Multi-bond network(MBN) which contains a single network with hierarchical cross-links is a suggested way to fabricate robust hydrogels. In order to reveal the roles of different cross-links with hierarchical bond energy in the MBN, here we fabricate poly(acrylic acid) physical hydrogels with dual bond network composed of ionic cross-links between carboxylFe3+ interactions and hydrogen bonds, and compare these dually cross-linked hydrogels with singly and ternarily cross-linked hydrogels. Simple models are employed to predict the tensile property, and the results confirm that the multi-bond network with hierarchical distribution in the bond energy of cross-links endows hydrogel with effective energy-dissipating mechanism. Moreover, the dually cross-linked MBN gels exhibit excellent mechanical properties(tensile strength up to 500 k Pa, elongation at break ~ 2400%) and complete self-healing after being kept at 50 °C for 48 h. The factors on promoting self-healing are deeply explored and the dynamic multi-bonds are regarded to trigger the self-healing along with the mutual diffusion of long polymer chains and ferric ions.     

含季鏻阳离子的[Mo6O19]2-多酸化合物的合成、结构及光催化性能研究

通过使用季鏻盐与钼酸铵在常温条件下合成了含季鏻阳离子的(n-PentylPh₃P)₂[Mo₆O₁₉]多酸化合物,并通过X-射线单晶衍射、红外光谱、紫外光谱、热重分析和电化学对其进行了表征。产物中的季鏻配体上的氢原子通过与多酸阴离子端基氧原子形成氢键而构筑了一维链状结构,并且季鏻配体上的苯环与相邻季鏻配体上的苯环通过π-π作用形成三维层状结构。此外,对该多酸化合物的光催化降解亚甲基蓝的性能进行了研究。     

饱和土体中压力隧洞衬砌-土相互作用解析研究

基于Biot理论，采用渗流一力学耦合模型研究分析了内水压力作用下饱和土体中压力隧洞衬砌一土的相互作用问题。假定衬砌和土体均为饱和多孔介质，且衬砌和土体完全接触。运用积分变换理论，在hplace变换域中得到了衬砌和土体中的应力、位移和孔隙水压力解答，并利用bplace数值逆变换得到时域中的解。文末的算例分析结果表明：(1)采用渗流一力学耦合模型能较好地反映隧洞衬砌与土体相互作用中应力和变形的随时间变化过程；(2)衬砌和土体的相对刚度对隧洞的计算结果有很大影响。     

一套预测冰面上汽车牵引力的模型

根据传热学中的热平衡原理及冰的摩擦经理论，建立了冰面汽车牵引力的预测模型。研究表明：所建立的理论模型比已有的模型更接近实际，从摩擦学角度系统分析了汽车工作条件和环境因素以及表面粗糙度等对牵引力的影响，提出了今后研究中有待解决的几个问题。     

Studies on the structure and catalytic performance of Cu-Zn-Al catalyst prepared by liquid-phase preparation technology under different heat treatment atmosphere

Cu-Zn-Al slurry catalysts were prepared using a complete liquid-phase preparation technology under different heat treatment atmospheres. The catalysts were characterized using X-ray diffraction, X-ray photoelectron spectroscope, and N2 adsorption-desorption. Their application in the single-step synthesis of dimethyl ether from syngas was also investigated. The results indicate that the type of heat treatment atmosphere has an influence on the Cu species and the Cu⁰/Cu⁺ ratio on the catalyst surface. Moreover, the final Cu/Zn ratio on the catalyst surface is mainly dependent on the composition and reaction environment of the catalyst and little on the type of heat treatment atmosphere. The prepared catalysts can suppress sintering of active sites at high temperatures, and the type of heat treatment atmosphere mainly affects the capability of the catalyst for methanol synthesis. The catalysts perform best using N2 as the heat treatment atmosphere.     

Quantitative characterization of membrane formation process of alginate–chitosan microcapsules by GPC

The semi-permeable membrane of alginate–chitosan (AC) microcapsules has been proven important to control the microcapsule stability and selective substance diffusion rate. Therefore, a novel and operable methodology based on gel permeation chromatography (GPC) was established for quantitative characterization of the membrane formation process, so as to provide guidance on performance improvement of AC microcapsules in biomedical applications. Not only the molecular weight (M_w) and its distribution of chitosan can be obtained by GPC, but also the area integral of molecular weight peaks can be linearly correlated to chitosan concentration in certain range. The dynamic membrane formation process was then obtained by quantitatively analyzing reaction amount of chitosan with time, which showed that for chitosan molecules with wide M_w distribution, only parts of molecules bind with alginate to form microcapsule membrane. Moreover, the contribution of chitosan molecules participating in the membrane formation process was also different. These new findings, therefore, are helpful for adjusting and controlling the membrane formation process and properties of microcapsule membrane.     

Homoleptic dirhodium tetraoctanoate and its pyridine adduct: synthesis and crystal structures

Dirhodium tetraoctanoate (1), without any exogenous axial ligands, has been obtained in crystalline form by slow evaporation from ethanol. The molecules are linked by axially ligating each other to form infinite chains, which is similar to the only other two structurally characterized rhodium(II) carboxylates, Rh₂(O₂CCF₃)₄ and Rh₂(O₂CC₃H₇)₄, which also lack exogenous axial ligands. The infinite chains of 1 are cleaved by strong donor solvents such as pyridine to produce the corresponding pyridine adduct (2). Both the complexes were characterized by elemental analysis, MS, IR and NMR spectra.