光纤光栅选频掺Yb3+双包层光纤激光器

利用相位掩模法 ,在D形内包层掺Yb3 双包层光纤一端直接写制出Bragg光栅 ,用作双包层光纤激光器的输出腔镜 .试验得到了线宽为 0 196nm ,波长为 10 5 8 2nm ,最高输出功率为 5 70mW的稳定激光输出 ,解决了激光器中模式竞争造成的输出不稳定现象 .从速率方程出发 ,对激光器的输出功率与抽运功率、光栅反射率的关系以及最佳光纤长度进行了理论分析 ,结果与实验符合很好     

硅光电二极管激光损伤阈值随激光脉宽的变化

 对飞秒激光辐照下硅光电二极管损伤阈值进行了实验测量，对从1s到60fs不同脉宽激光辐照下硅光电二极管损伤阈值进行了讨论。实验数据表明，在1s到10ns脉宽范围内损伤所需能量密度近似而非严格地与脉宽的平方根成正比。信号分析表明硅光电二极管的损伤主要由热效应造成，而60fs激光辐照下的损伤阈值为0.1J/cm2，明显偏离普通温度分布预言的趋势。     

一种改进的自适应模糊阈值图象分割方法

自适应模糊阈值图象分割方法的关键和困难在于隶属函数窗宽的自动调整和阈值搜索范围的确定.依靠图象灰度的统计特性初步确定阈值搜索范围，提出了一种改进方法，进而得到隶属函数的窗宽.实验表明这种方法避免了确定图象灰度直方图峰位置的困难，对较低亮度图象分割效果良好.     

THERMAL AND THERMO-ELASTIC-PLASTIC RESPONSE OF CERAMIC-METAL FUNCTIONALLY GRADED MATERIALS—THERMAL SHOCK PROBLEM

The thermal and thermo-elastic-plastic response of newly developed ceramic-metalfunctionally graded materials under a thermal shock load is studied.The materials are heated at the ce-ramic surface with a sudden high-intensity heat flux input,and cooled at the metal surface with aflowing liquid nitrogen.Emphasis is placed on two aspects:(1)the influence of the graded composi-tion of the materials on the temperature and stress response;and(2)the optimum design of the gradedcomposition from a unified viewpoint of the heat insulation property and stress relaxation property.Moreover,a comparison between the thermoelastic stress and the thermo-elastic-plastic stress is alsomade to indicate the plasticity effect.     

激光相位成像雷达的研究

利用无合作目标漫反射激光相位测距的原理,对关键单元技术进行分析和设计,研制成一种用于自主式车辆视觉导引的激光相位成像雷达的原理样机.     

一种锰铜压阻测量新方法

 简单分析了几种常用的恒流供电锰铜压阻测量方法，并对这些测试方法的特点和不足进行了讨论。最后介绍一种利用数字示波器进行高保真高精度测量的方法，利用此法不仅提高了压力测量的精度，并且把小阻值锰铜压力计的测量范围向低端扩展到0.17 GPa。     

小视角对颜色差别阀的影响

在均匀颜色空间的颜色差别计箅中,亮度和色彩的作用是相关且不同的,尤其是在目标尺度对人眼张角(亦称视角)小于30角度分的条件下观察,由于亮度差和色彩差受视角变化的影响程度不同步,使得人眼颜色差别分辨阈亦不确定。本文通过一定的试验和计算,探讨了在不同的亮度差和色彩差的情况下,颜色差别阈受视角影响的变化规律。     

Isothermal crystallization kinetics of poly(3‐hydroxybutyrate)/layered double hydroxide nanocomposites

Poly(3‐hydroxybutyrate) (PHB)/layered double hydroxides (LDHs) nanocomposites were prepared by mixing PHB and poly(ethylene glycol) phosphonates (PEOPAs)‐modified LDH (PMLDH) in chloroform solution. Both X‐ray diffraction data and TEM micrographs of PHB/PMLDH nanocomposites indicate that the PMLDHs are randomly dispersed and exfoliated into the PHB matrix. In this study, the effect of PMLDH on the isothermal crystallization behavior of PHB was investigated using a differential scanning calorimeter (DSC) and polarized optical microscopy. Isothermal crystallization results of PHB/PMLDH nanocomposites show that the addition of 2 wt % PMLDH into PHB induced more heterogeneous nucleation in the crystallization significantly increasing the crystallization rate and reducing their activation energy. By adding more PMLDH into the PHB probably causes more steric hindrance of the diffusion of PHB, reducing the transportation ability of polymer chains during crystallization, thus increasing the activation energy. The correlation among crystallization kinetics, melting behavior and crystalline structure of PHB/PMLDH nanocomposites can also be discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3337–3347, 2006