Composite Electrode SnO2／TiO2 for Dye-Sensitized Solar Cells

Composite nanoporous electrode SnO2/TiO2 was fabricated for the dye sensitized solar cell (DSSC) with N3 (Cis-Ru). After introducing of TiO2, the open-circuit photovoltage (Voc) was higher than that of the pure SnO2 electrode, while short-circuit photocurrent (Isc) was varied with the ratio of the TiO2. Appropriate content of the TiO2 can be beneficial to the efficiency of the solar cell, and it gives negative impact on the composite electrode when the content of TiO2 is higher.     

金属离子掺杂对TiO2光催化性能的影响

TiO₂光催化反应过程涉及光生电荷、电荷迁移、电荷在TiO₂表面的反应和溶液体相反应4个顺序相接并相互影响的步骤.在TiO₂中掺杂金属离子对以上4个步骤均有重要影响,合理的掺杂可有效地提高其光催化性能.本文综合了国内外此方面的最新研究成果,从提高TiO₂光催化性能和优化光催化反应的角度出发,在材料吸光能力、电荷扩散、表面反应、粒径和晶型等方面,全面地分析总结了金属离子掺杂的影响效果和规律性认识,并对TiO₂基光催化材料的金属离子掺杂改性研究的未来发展方向提出了建议.文中还简要介绍了相关的掺杂方法和材料表征手段.     

Promoting effect of sol-gel method and pre-treatment on the activity of SnO2/Al2O3 catalyst for NO reduction by propene

SnO₂/Al₂O₃ catalyst prepared by sol-gel method showed higher activity than those prepared by impregnation method, and their activity was significantly improved by pre-treatment in the reaction gas. The increased activity is closely related to the agglomeration of SnO₂ species and the re-exposure of Al₂O₃, which was previously covered by dispersed SnO₂ species. This revised version was published online in June 2006 with corrections to the Cover Date.     

Preparation, characterization, and application of multistimuli-responsive microspheres with fluorescence-labeled magnetic cores and thermoresponsive shells

Novel functional microspheres with multistimuli-responsive properties have been prepared and characterized. The as-prepared microspheres respond to an external magnetic field, environmental temperature, and ultraviolet radiation. The in vitro drug-loading efficiency and drug-release behavior of these microspheres demonstrated that they could be used as drug carriers for drug controlled release. The results of in vivo distribution investigations of these microspheres showed that they exhibit a high magnetic-targeting effect, which holds promise for applications in various fields such as magnetic drug targeting and tissue labeling, among others.     

氧杂环丁烷热解机理的量子化学研究

本文利用半经验分子轨道理论研究了氧杂环丁烷热解为甲醛和乙烯的反应机理计算是采用半经验方法AM1进行的, 各种驻点全部运用Berny梯度方法优化. 同时, 对过渡态的结构进行了振动分析的确证. 计算表明: 1)不存在协同的同面-同面反应途径的过渡态, 其驻点只是一个二级鞍点; 2) 协同的同面-异面反应途径需要经过一个能量很高的过渡态; 3)有利的反应途径是包含了双自由基中间体的分步过程。     

三价铬与丙二酸形成的配合物的热解过程研究

利用热重分析及原位红光谱等方法，定性，定量地研究了三价铬和丙二酸形成的配合物［Ｃｒ（Ｃ３Ｈ２Ｏ４）（Ｈ２Ｏ）４］［Ｃｒ（Ｃ３Ｏ４）２（Ｈ２Ｏ２）］．４Ｈ２Ｏ的热解过程，提出了室温至４００℃下的详细热解途径。基于多种实验结果，分析了螯合物中六员环的化学断裂方式，并由配合物的快原子轰击质谱（ＦＡＢ－ＭＳ）加以佐证。     

2-硝基丙烯热解反应的理论研究

利用MO-AM1方法研究了2-硝基丙烯热解的反应途径。结果表明, 2-硝基丙烯可能首先热解产生一个四元环状中间体。该中间体依照分步过程继续分解时, 存在两种可能的途径, 其中先断N—O键的反应过程比先断C—C键的过程从能量上更为有利。反应过程中电荷无明显转移, 具有双自由基反应特点。     

磷脂酰胆碱与牛血清白蛋白相互作用的FT-IR研究

利用傅立叶变换红外(FT-IR)和拉曼(FT-Raman)光谱研究了高浓度磷脂酰胆碱(PC)与牛血清白蛋白(BSA)的相互作用,及Eu3＋对该作用的影响.FT-IR结果显示,PC/BSA混合体系中二者的相互作用主要发生在PC头部极性基团,且这一作用随BSA含量的增加而增强,作用后蛋白质二级结构中α螺旋的比例有所增加. FT-Raman光谱说明PC与BSA的相互作用影响磷脂CH链的排列有序程度. PC/BSA/Eu3＋体系的红外光谱显示, Eu3＋与PC的磷氧键发生了强相互作用,并使蛋白α螺旋的比例进一步增加.     

乙基乙酰胺热解反应机理的MO研究

对于烷基乙酰胺的初始热解反应机理, 通常认为与酯类的热解反应相类似。Maccoll和Nagra通过对该热解反应的动力学研究, 认为两者存在不同。差异之一, 烷基乙酰胺存在两种可能的热解途径【参见本文(129页)前述反应方程(1),(2)】。而在酯类热解反应中(2)的活化能过高, 且四元环过渡态极不稳定。差异之二, 极性溶剂(比如乙酸)对酰胺热解反应的催化作用不明显, 而对酯类等气相热解反应的催化作用是十分显著的。为此, 我们用MINDO/3分子轨道法对乙基乙酰胺的初始热解反应进行了较全面的研究。用能量梯度法对此反应的反应物、中间体和生成物的平衡几何构型进行了全优化。(如图1所示)用极小能量途径法分别寻找反应(1)和反应(2)的初始过渡态, 继而用Powell法全优化过渡态的几何构型, 计算所得的过渡态TS1、TS2和TS3分别见图2a, 图3a和图4a。为了确证这些过渡态, 进行了振动分析研究, 结果表明这些过渡态的力常数矩阵的诸本征值中均只有一个负值, 且虚振动模式展示了走向各自的反应物和生成物的趋势, (如图2b,图3b和图4b所示)。它们的总能量及反应(1)和反应(2)的活化能列于表1. 对整个热解反应(1)作了内禀反应坐标(IRC)理论分析, 反应历程见图5所示. 与IRC相应的总能偶极矩以及部分关键的键长和原子净电荷变化一并列于表2.本文研究结果表明, 在乙基乙酰胺的初始反应中主反应即反应(1)与酯类反应相类似, ...     

Oxidative coupling of methane over Sr?Ti, Sr?Sn perovskites and corresponding layered perovskites

The layered perovskites Sr₂TiO₄ and Sr₂SnO₄ are more active and selective for the oxidative coupling of methane at 1073 K than the corresponding perovskites SrTiO₃ and SrSnO₃. The role of the surface oxygen species for this reaction is discussed.