Bubble pulsations between parallel plates

The dynamic response of an acoustically driven spherical bubble between parallel plates is investigated in the linear approximation. For the case of rigid plates, explicit expressions are provided for the resonance frequency and damping, and the importance of including compressibility of the liquid is discussed. For wide channels, approximate results are presented that account for finite acoustic impedance of the plates.     

Electrogenerated chemiluminescence of luminol on a gold-nanorod-modified gold electrode

Electrogenerated chemiluminescence (ECL) of luminol on a gold-nanorod-modified gold electrode was studied, and five ECL peaks were obtained under conventional cyclic voltammetry in both neutral and alkaline solutions. Among them, four ECL peaks (ECL-1-4) were also observed on a gold-nanosphere-modified gold electrode, but the intensities of these ECL peaks were enhanced about 2-10-fold on a gold-nanorod-modified gold electrode in neutral solution. One new strong ECL peak (ECL-5) was obtained at -0.28 V (vs SCE) on a gold-nanorod-modified gold electrode in both neutral and alkaline solutions and enhanced with an increase in pH. In strong alkaline solutions, ECL-1 and ECL-2 on a gold-nanosphere-modified electrode were much stronger than those on a gold-nanorod-modified gold electrode, while ECL-3-5 appeared to only happen on a gold-nanorod-modified gold electrode. The emitter of all the ECL peaks was identified as 3-aminophthalate. The ECL peaks were found to depend on the scan direction, the electrolytes, the pH, and the presence of O(2) and N(2). The reaction pathways for ECL-4 have been further elucidated, and the mechanism of the new ECL peak (ECL-5) has been proposed. The results indicate that a gold-nanorod-modified gold electrode has a catalytic effect on luminol ECL different from that of a gold-nanosphere-modified gold electrode, revealing that the shape of the metal nanoparticles has an important effect on the luminol ECL behavior. The strong ECL of luminol in neutral solution obtained on a gold-nanorod-modified electrode may be used for the sensitive detection of biologically important compounds in physiological conditions.     

Experimental and computational studies of alkali-metal coinage-metal clusters

Coinage and alkali metal mixed clusters, M4Na- (M = Cu, Au) have been investigated experimentally using photoelectron spectroscopy and computationally at correlated ab initio levels. The related Cu4Li-, Ag4Li-, Ag4Na-, and Au4Li- clusters as well as the neutral Cu4Li2 and Cu4Na2 clusters have also been studied computationally. The calculations show that the two lowest isomers of the negatively charged clusters include a pyramidal C4v structure and a planar C2v species. For Cu4Li- and Cu4Na-, the C4v structure is calculated at correlated ab initio level to be 30.9 and 16.9 kJ/mol below the planar C2v isomer, whereas the planar isomers of Au4Li- and Au4Na- are found to be 29.7 and 49.4 kJ/mol below the pyramidal ones. For Ag4Li- and Ag4Na-, the pyramidal isomers are the lowest ones. Comparison of the calculated and measured photoelectron spectra of Cu4Na- and Au4Na- shows that the pyramidal Cu4Na- cluster of C4v symmetry and the planar Au4Na- of C2v symmetry are detected experimentally. Calculations of the magnetically induced current density in Cu4Li- and Cu4Li2 using the Gauge-Including Magnetically Induced Current (GIMIC) method show that strong ring currents are sustained mainly by the highest-occupied molecular orbital primarily derived from the Cu 4s. The GIMIC calculations thus show that the Cu4(2-) ring is -aromatic and that the d orbitals do not play any significant role for the electron delocalization effects. The present study does not support the notion that the square-planar Cu4(2-) is the first example of d-orbital aromatic molecules.     

Baker's yeast-mediated enantioselective reduction of substituted fluorenones

In the presence of DMSO as co-solvent and under vigorous agitation, baker's yeast in water was found to reduce substituted fluorenones to the corresponding fluorenols in good to excellent enantioselectivities.     

Structural evolution of anionic silicon clusters SiN (20 <or= N <or= 45)

Results of a combined photoelectron spectroscopy and first-principles density-functional study of SiN- clusters in the size range 20 or= 20. For 28 相似文献   

Study of asymmetric wavenumber shift of the Fermi doublet ν1 − 2ν2 in the Raman spectrum of liquid carbon disulfide

The Raman spectra of liquid carbon disulfide (CS₂) diluted with benzene (C₆H₆) have been measured. By changing the CS₂, the concentration, we found an asymmetric wavenumber shift phenomenon. With decreasing concentration of CS₂, the position of the ν₁ (655 cm⁻¹) band remains practically unchanged, and the 2ν₂ (796 cm⁻¹) band shifts toward higher wavenumbers. To interpret this asymmetric wavenumber shift phenomenon of the Fermi doublet ν₁ − 2ν₂ in the Raman spectra satisfactorily, we propose a modified Bertran model. The values of the Fermi resonance (FR) parameters of CS₂ at different concentrations were calculated using the Bertran equations. In addition, we found the fundamental ν₂, which should be independent of the FR interaction, shifted to higher wavenumbers as the concentration decreased. This shift was probably driven by the tuning of the FR. Copyright © 2009 John Wiley & Sons, Ltd.     

A miniaturized HTS microwave receiver front-end subsystem for radar and communication applications

This paper presents a miniaturized high performance high temperature superconducting (HTS) microwave receiver front-end subsystem, which uses a mini stirling cryocooler to cool a high selective HTS filter and a low noise amplifier (LNA). The HTS filter was miniaturized by using specially designed compact resonators and fabricating with double-sided YBCO films on LAO substrate which has a relatively high permittivity. The LNA was specially designed to work at cryogenic temperature with noise figure of 0.27 dB at 71 K. The mini cryocooler, which is widely used in infrared detectors, has a smaller size (60 mm × 80 mm × 100 mm) and a lighter weight (340 g) than the stirling cryocoolers commonly used in other HTS filter subsystem. The whole front-end subsystem, including a HTS filter, a LNA, a cryocooler and the vacuum chamber, has a size of only φ120 mm × 175 mm and a weight of only 3.3 kg. The microwave devices inside the subsystem are working at 71.8 K with a consumed cooling power of 0.325 W. The center frequency of this subsystem is 925.2 MHz and the bandwidth is 2.7 MHz (which is a fractional bandwidth of 0.2%), with the gain of 19.75 dB at center frequency and the return loss better than ?18.11 dB in the pass band. The stop band rejection is more than 60 dB and the skirt slope is exceeding 120 dB MHz^?1. The noise figure of this subsystem is less than 0.8 dB. This front-end subsystem can be used in radars and communication systems conveniently due to it’s compact size and light weight.     

Numerical investigations of a multi-walled carbon nanotube-based multi-segmented optical antenna

Motivated by the fabrication potential of multi-walled carbon nanotube structures, we numerically investigated a paired structure consisting of two metallic spheres each grown on one end of a multi-walled nanotube. The paired two-segmented structure is capable to convert free-space radiation into an intense near-field, and, hence, acting as an optical antenna. Vice versa the presence of the two nanotubes enable a current source at the antenna feed to more efficiently energy into the radiation modes, resulting e.g. in correspondingly altered luminescence lifetimes when an excited single molecule is placed in the feed point. Furthermore, the structure represents a mean to localize light on a sub-wavelength scale within different materials, which is interesting in the context of a fabrication technology for integrated nanophotonic components with different material combinations. The optical properties of the nano-antenna are analyzed by means of numerical simulations using the finite element method. Our investigations have revealed that the field enhancement, the resonances, and the radiation patterns can be easily tuned since all these quantities strongly depend on the size of the nanotubes and the metallic spheres, as well as on their material properties The structure we propose here carries a great potential for bio-sensing, for tip-enhanced spectroscopy applications, and for interfacing integrated photonic nano circuits.     

代数迭代法用于傅里叶变换计算层析成像光谱仪数据重建

主要介绍代数迭代法在傅里叶变换计算层析成像光谱仪数据处理中的应用。根据4种不同投影数进行了光谱切片重建,并对光谱相似性进行了比较。针对ART算法可应用少数投影重建的特点,专门在45个投影数时,采用不同迭代系数进行了重建,并进行了比较。最后,对实际场景进行了光谱切片重建。     

大鼠肾脏糖胺聚糖的种类及二糖组成分析

采用两步酶解和离子交换色谱从Wistar大鼠肾脏中提取糖胺聚糖,以醋酸纤维素薄膜电泳分析糖胺聚糖种类,以弱阴离子交换色谱分离各种糖胺聚糖.纯化后的糖胺聚糖分别经特定糖胺聚糖酶裂解,采用强阴离子交换高效液相色谱(SAX-HPLC)紫外检测分析其二糖组成.结果表明,Wistar大鼠肾脏糖胺聚糖主要由硫酸乙酰肝素和少量硫酸皮肤素组成.硫酸乙酰肝素含有8种二糖,其中含有乙酰基二糖总含量高达77.6%,非硫酸化二糖(Ⅳ-A)含量为59.7%;硫酸皮肤素含有6种二糖,其中单硫酸化二糖总含量为54.8%,非硫酸化二糖含量为32.9%.