Semipolar (11\bar 2\bar 2) ZnO thin films grown on LaAlO3‐buffered LSAT (112) single crystals by pulsed laser deposition

Semipolar (11\bar 2 \bar 2) ZnO was successfully grown on (112) LaAlO₃/(LaAlO₃)_0.29(Sr₂AlTaO₆)_0.35 substrate by pulsed laser deposition. The epitaxial relationship is [11\bar 23]_{\rm ZnO} // [11\bar 1]_{\rm LAO/LSAT} with the polar axis of [000\bar 1]_{\rm ZnO} pointing to the surface. For ZnO films with thickness of 1.6 μm, the threading dislocation density is ～1 × 10⁹ cm^–2, and the density of basal stacking faults is below 1 × 10⁴ cm^–1. The (11\bar 2 \bar 2) ZnO exhibits strong D⁰X emissions with a FWHM of 9 meV and very few green–yellow emissions in the low‐temperature (10 K) and room‐temperature photoluminescence spectra, respectively.

     

Crystalline Morphology and Nonisothermal Crystallization Behaviors of iPP/PcBR Blends

Isotactic polypropylene/poly(cis‐butadiene) rubber (iPP/PcBR) blends were prepared by melt mixing. The influence of PcBR content on crystalline morphology and nonisothermal crystallization behaviors of iPP was investigated by polarized optical microscopy (POM), small angle light scattering (SALS), and differential scanning calorimetry (DSC). The POM showed that an increase of PcBR ranging from 10 vol% to 40 vol% led to less perfection of spherulites, vaguer boundaries between spherulites, and smaller spherulite size, which was quantitatively validated by SALS. The presence of PcBR also remarkably affected the nonisothermal crystallization behaviors of iPP. An addition of PcBR caused higher crystallization peak temperature and a faster crystallization rate, meaning a heterogeneous nucleation effect of PcBR upon crystallization of iPP. For the same sample, the crystallization peak temperature moved to lower temperature and the crystallization rate increased as the cooling rate increased. The Ozawa and combined Avrami and Ozawa equations were used to describe the nonisothermal crystallization process of iPP and blends. The combined Avrami and Ozawa equation was more appropriate for the crystallization of the blends. Crystallization activation energy of iPP and blends was calculated by the Kissinger equation; the result showed that crystallization activation energy decreased as the content of PcBR increased from 30 vol% to 40 vol%.     

Preparation and Flammability of a Flame-Retardant Poly(Butyl Acrylate-Vinyl Acetate) System Based on Gemin-Surfactant Modified Montmorillonite and Ammonium Polyphosphate

Gemin-surfactant modified montmorillonite (G-MMT) was successfully prepared by an ion exchange reaction and characterized via Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The P(BA-VAc)/G-MMT emulsion was prepared via an in-situ polymerization method using potassium persulfate (K₂S₂O₈, KPS) as an initiator. Ammonium polyphosphate (APP) was introduced for obtaining P(BA-VAc)/APP/G-MMT flame-retardant latex with a constant total content of 15 wt% of APP and G-MMT in P(BA-VAc). The flame retardancy and thermal behavior of the latex films were investigated by limiting oxygen index (LOI), vertical burning test (UL-94) and thermal gravimetric analysis (TG/DTA). Compared with the P(BA-VAc)/APP composite, the LOI value of P(BA-VAc)/APP/G-MMT containing 0.5 wt% G-MMT at the same total additive loading increased to 29.1 from 20.0 and its UL-94 increased from no rating to V-0. Thermal gravimetric (TG) data showed that the amount of residues increased significantly with the loading of G-MMT. In addition, the LOI values increased with the increase in char residues. The morphology and microstructure of the residues generated during LOI testing were investigated by scanning electron microscopy (SEM). The outer surfaces of P(BA-VAc)/APP/G-MMT charred layers were more continuous and compact than those of P(BA-VAc)/APP.     

Improved Performance of On-line Atom Trapping in Flame Furnace Atomic Absorption Spectrometry by Chemical Vapor Generation: Determination of Cadmium in High-Salinity Water Samples

ABSTRACT

On-line atom trapping inside a nickel flame furnace using chemical vapor generation for sample introduction was proposed for the determination of trace cadmium by flame atomic absorption spectrometry (AAS). Cadmium volatile species was generated upon reaction with potassium borohydride and then flushed into a flame furnace for on-line trapping by a flow of nitrogen carrier gas. The middle part of the flame furnace, where the carrier gas impacts, is cooled by the gas flow, and this provides a fine strategy for on-line atom trapping for the purpose of preconcentration. A stainless steel plate is put on the top of the flame burner in the middle to form a flame-free zone, which also greatly lowers the temperature of the flame furnace and facilitates the atom-trapping process. Due to the introduction of chemical vapor generation, matrix effect was greatly alleviated compared with direct pneumatic nebulization for on-line atom trapping in flame furnace AAS. With trapping time of 35 s, the current approach achieved an excellent limit of detection of 20 ng L^?1. The proposed method was successfully applied for the quantification of cadmium in high-salinity samples.     

Research on exponential regularization approach for nonnegative Tucker3 decomposition

Methods of nonnegative tensor factorization (NTF), such as NTF1, NTF2, etc., are extension of nonnegative matrix factorization (NMF) for multi-way data analysis. As an existing NTF method, nonnegative Tucker3 decomposition (NTD) is researched for three-way decomposition in this paper. Firstly, an approach utilizing matrix exponentials built on Tikhonov-type regularization to enforce sparseness is proposed to extract image features instead of exclusively using Tucker tensor decomposition. Meanwhile, updating algorithms, derived from updating rules of NMF, are allowed to efficiently implement updating of mode matrices and core tensors alternatively for accuracy. Then, experimental cases of alternating least squares (ALS) and conjugate nonnegative constraints, called nonnegative alternating least squares (NALS), are studied to remedy data overfitting in computing procedures. Lastly, the proposed method exhibits more advantageous results than other algorithms of Tucker3 for feature extraction, thanks to computer simulations performed in the context of data analysis.     

Differentiation of central gland prostate cancer from benign prostatic hyperplasia using monoexponential and biexponential diffusion-weighted imaging

PurposeTo investigate biexponential apparent diffusion parameters of prostate central gland (CG) cancer, stromal hyperplasia (SH), and glandular hyperplasia (GH) and compare with monoexponential apparent diffusion coefficient (ADC) value for discriminating prostate cancer from benign hyperplasia.Materials and MethodsTwenty-one CG cancer foci, 23 SH and 26 GH nodules in the CG were analyzed in 39 patients (19 with CG cancer, 20 with peripheral zone cancer but no CG cancer) who underwent preoperative conventional DWI (b-value 0, 1000 s/mm²) and a 10 b-value (range 0 to 3000 s/mm²) DWI. All of the cancer and hyperplastic foci on MR images were localized on the basis of histopathologic correlation. The ADC value of the monoexponential DWI, and the fast apparent diffusion coefficient (ADCf), slow apparent diffusion coefficient (ADCs) value and the fraction of ADCf (f) of the biexponential DWI were calculated for all of the lesions. Receiver operating characteristic (ROC) analysis was performed for the differentiation of CG cancer from SH and GH.ResultsThe ADC values (× 10^? 3 mm²/s) were 0.87 ± 0.11, 1.06 ± 0.15, and 1.61 ± 0.27 in CG cancer, SH and GH foci, respectively, and differed significantly, yielding areas under the ROC curve (AUCs) of 1.00 and 0.80 for the differentiation of carcinoma from GH and SH, respectively. The ADCf (× 10^? 3 mm²/s), ADCs (× 10^? 3 mm²/s) and f for cancer were 1.92 ± 0.38, 0.53 ± 0.17, and 47.7 ± 6.1%, respectively, which were lower than the same values for GH (3.43 ± 0.65, 1.12 ± 0.21, 61.1 ± 8.7%) (all p < 0.01). The ADCf and ADCs for cancer were also lower than those for SH (3.11 ± 0.30, 0.79 ± 0.21) (all p < 0.01). The ADCf yielded AUCs (1.00, p > 0.01) that were comparable to those from ADC for the differentiation of cancer from GH, while ADCf yielded higher AUCs (0.92) compared with ADC (p < 0.01) for the differentiation of cancer from SH. ADCs and f revealed AUCs of 0.97 and 0.90, respectively, for the differentiation of cancer from GH, and the ADCs offered relatively lower AUCs (0.68) for differentiating cancer from SH.ConclusionBiexponential DWI could potentially improve the differentiation of prostate cancer in CG, and the ADCf of the biexponential model offers better accuracy than ADC.     

A Novel Approach to All-Optical Generation of Ultra-Wideband Signals

Abstract

The generation of ultra-wideband signals in the optical domain is highly desirable for ultra-wideband-over-fiber systems, which has recently become a topic of interest. In this article, a novel and simple approach to achieve all-optical generation of ultra-wideband signals is proposed, which is based on delaying and superimposing optical Gaussian pulses with opposite polarities. The proposed system is capable of generating both ultra-wideband monocycle and doublet pulses, and the polarity of the generated ultra-wideband monocycle pulses can be fast-switched to implement pulse polarity modulation with the required bit pattern. A model to describe the proposed system is developed, and the generation of ultra-wideband signals is demonstrated with simulations and a proof-of-concept experiment.     

Spectroscopic Studies of the Stability of Doped Polythiophenes Under Air

Abstract

The stability of the doped state of conductive polythiophenes under air was investigated by the use of Infrared (IR) and UV-visible (UV) spectroscopies. Poly(3-methyl thiophene) doped with BF₃-ethyl ether (BFEE). shows higher stability due to its stereoregularity-chain structure. While the doped polythiophene (PT) degrades easily under the moisture.     

人力资源的预测方法

人力资源规划是必不可少的管理环节．科学的人力资源规划，必须建立在对人员供、需的准确预测的基础上．本文讨论人力资源预测的问题和转移矩阵等方法的使用．     

人工扰动电离层仿真系统的设计与实现

设计并开发了一种人工扰动电离层仿真系统．建立了数值模型，规划出系统总体构造，在实现过程中引入VC、VF混合编程的概念，以达到两种语言优势互补的目的．文中详细论述了VC、VF混合编程对于数据的处理，生成Fortran的动态链接库，以及在VC中调用生成库的技术．通过仿真模拟，得出了电离层加热过程中电子密度、电子温度等随时间演化的规律，及发射电波频率、功率对加热效果的影响．试用证明，该系统有效地模拟了电离层人工扰动的状态，为在我国实施加热工程提供了可靠的科学依据．