基于车载通信标准街道场景的电磁散射信道模型

针对室外无线信道视距(line of sight,LOS)/非视距(non-line of sight,NLOS)传输环境下的车到车(vehicular-to-vehicular,V2V)通信系统,本文提出了一种基于标准街道散射的统计信道模型,其移动发射机(mobile transmitter,MT)与移动接收机(mobile receiver,MR)处于运动状态,街道两旁分布的散射体固定.由几何模型出发又引入了一种随机的参考信道模型,其散射体有无穷多个,均以平行于街道两侧的散射条纹形式均匀分布在三维(three dimensional,3D)空间的一个二维(two dimensional,2D)矩形内部.在室外街道通信环境下,模型推导了散射信道中发射角(angle of departure,AOD)以及到达角(angle of arrival,AOA)的概率密度函数(probability density functions,PDFs)解析式;研究了多普勒功率谱密度(power spectral density,PSD)及其时间自相关函数(autocorrelation function,ACF);分析了模型多普勒参数以及街道散射体等因素对V2V通信系统性能的影响.与城市、农村的测量信道对比分析,表明本模型仿真的统计特性符合理论与实际,拓宽了室外V2V无线通信信道建模的研究.为评估室外V2V通信系统的传输特性、仿真无线通信系统提供了有力的研究工具.     

Fusion Reaction of ^16O＋^14N and Its Implication for the Production of ^26Al in Explosive Oxygen Burning

We suggest that the fusion reaction ^16O＋^14N may be a new way to produce ^26Al in interstellar medium. Adopting different mixing modes, we investigate the impact on the production of ^26Al in explosive oxygen burning and find that the result is extremely sensitive to mixing mechanisms. In some cases, we obtain an encouraging result, for example, the greatest final abundance of ^26Al reaches 7.779×10^-6, which means that the explosive oxygen burning may be a new origin of ^26 Al.     

一种基于图像融合的运动目标快速检测算法

提出了一种新的运动目标检测方法,这种方法可以有效的提取目标轮廓。应用一种图像差分技术得到运动目标的初始轮廓线。使用了动态轮廓线使其收敛到目标轮廓。提出了一种新的目标轮廓特征级融合方法,求解两类模式图像的收敛动态轮廓线控制点向量差的范数平方极小化。这种方法不需要图像配准降低了融合的计算复杂度,有效提高了可见光图像中目标轮廓提取的精度。对比检测实验证实了算法的有效性。设计了一种基于Newmark方法的动态轮廓线快速迭代算法,将该方法和方法作了比较,对比实验表明这种方法的时间复杂度降低了22%。     

多色脉冲激光光源研究

采用钛宝石锁模飞秒激光器作为泵浦光源,利用1.8 μm纤芯的保偏光子晶体光纤的高非线性特性产生超连续谱,通过调节泵浦光源和光子晶体光纤之间的耦合,在可见光区,获得了中心波长分别在431 nm, 497 nm, 520 nm, 575 nm的mW量级的不同颜色的激光输出,并且测量输出的脉冲序列重复频率与泵浦光的一致,具有良好的稳定性.     

Formation and characterization of high-density Fe cluster-assembled films with soft magnetic behaviors

High-density, magnetically soft Fe cluster-assembled films were obtained at room temperature by an energetic cluster deposition. Size-monodispersed Fe clusters with the mean cluster size d = 9, 13 and 16 nm were produced using a plasma-gas-condensation technique. Ionized clusters in cluster beam were accelerated electrically and deposited onto the substrate together with neutral clusters from the same cluster source. The morphology, microstructure and magnetic properties of the cluster-assembled films have been studied by an atomic force microscopy, scanning electron microscopy, transmission electron microscopy, and superconducting quantum interference device magnetometer. By increasing the impact energy of the ionized clusters up to 0.6 eV/atom, the Fe cluster-assembled film has a packing fraction of 0.86±0.03, and reveals a soft magnetic behavior. In addition, it is found that oxidization of the cluster-assembled films is remarkably suppressed with the increase in the density of the films.     

硅单粒子位移损伤多尺度模拟研究

本文结合分子动力学方法和动力学蒙特卡罗方法, 研究了单个粒子入射硅引起的位移损伤缺陷的产生和演化过程; 基于Shockley-Read-Hall理论计算了单个粒子入射引起的位移损伤缺陷导致的泄漏电流增加及其演化过程, 比较了缺陷退火因子与泄漏电流退火因子之间的差异, 并将计算结果与实验值进行了对比. 结果表明, 计算泄漏电流时, 仅考虑一种缺陷的情况下缺陷退火因子与泄漏电流退火因子相同, 考虑两种缺陷类型情况下二者在数值上有所区别, 但缺陷退火因子仍能在一定程度上反映泄漏电流的退火行为. 分子动力学模拟中采用Stillinger-Weber势函数和Tersoff势函数时缺陷退火因子和泄漏电流退火因子与实验结果一致, 基于Stillinger-Weber势函数的计算结果与实验值更为接近.     

具有空间重叠性和时间同步性的双波长TEA CO2激光器研究

提出了一种改进的双波长TEA CO2激光器,不仅具有良好的空间重叠性,而且具有比较理想的时间同步性.该激光器由两个空间上部分重叠的光栅和一个锗镜构成光栅-平面腔,两个光栅前后放置,相互利用,共同建立双频振荡,由锗镜输出双波长激光.通过改变两光栅的有效面积,对两输出脉冲空间重叠性进行调节;通过改变两光栅的角度形成的失谐缩小输出脉冲的时间间隔,达到时间同步性.实验表明,可以在空间重叠性的基础上使两输出脉冲的时间间隔由1 000 ns调整到200 ns.     

Phase Transition and High Piezoactivity of Sb Doped （Na0.53K0.435Li0.035）Nb0.94Ta0.06 O3 Lead-Free Ceramics

Lead-free piezoelectric ceramics with the composition of （Na0.53K0.435Li0.035）Nb0.94Ta0.06 O3 （NKLNST） axe synthesized by a conventional solid-state sintering process. An MPB-like region between orthorhombic and pseudocubic phases is found in this system. The density, piezoelectric and dielectric properties axe enhanced greatly in this region. A composition （Na0.53K0.435Li0.035）（Nb0.94Ta0.06）O3 is found to have excellent electrical properties： d33 = 320pC/N, kp= 49% and kt =43%, as well as relatively low loss, tan δ=4.2%, and high relative density higher than 96%, which indicate that this ceramics is a promising lead-free piezoceramics replacing for lead zirconate titanate.     

Highly stable amorphous indium‐zinc‐oxide thin‐film transistors with back‐channel wet‐etch process

The stabilities of amorphous indium‐zinc‐oxide (IZO) thin film transistors (TFTs) with back‐channel‐etch (BCE) structure are investigated. A molybdenum (Mo) source/drain electrode was deposited on an IZO layer and patterned by hydrogen peroxide (H₂O₂)‐based etchants. Then, after etching the Mo layer, SF₆ plasma with direct plasma mode was employed and optimized to improve the bias stress stability. Scanning electron microscopy and X‐ray photoelectron spectroscopic analysis revealed that the etching residues were removed efficiently by the plasma treatment. The modified BCE‐ TFTs showed only threshold voltage shifts of 0.25 V and –0.20 V under positive/negative bias thermal stress (P/NBTS, V_GS = ±30 V, V_DS = 0 V and T = 60 °C) after 12 hours, respectively. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

大功率高温超导滤波器的设计与功率测试

本文在双面YBCO高温超导薄膜上设计并制备了两节大功率超导滤波器,根据滤波器功率承载能力与最大电流密度之间的关系,减小电流密度和分散电流密度的分布是提高功率承载能力的关键.本文采用增加超导谐振器尺寸、优化几何结构及改进馈线耦合方式的方法,设计了两节2 GHz频段梭型谐振器结构的滤波器.设计及测量结果显示了馈线结构及谐振器几何尺寸优化程度对超导滤波器功率承载能力有不同程度的影响,说明了在大功率超导滤波器设计中应选用无结点间隙耦合式馈线以抑制电流密度的聚集.采用优化后的谐振器结构制备的梭型两节超导滤波器经测试功率承载能力为2 W.超导滤波器的尺寸为25×12 mm LaAlO3基片,中心频率2.022 GHz,相对带宽为2.4%.同时给出了超导滤波器功率测试的结构和方法.