A comparison between the SBR vulcanizates reinforced by magnesium methacrylate added directly or prepared in situ

The styrene-butadiene rubber (SBR) cured by dicumyl peroxide was reinforced by magnesium methacrylate [Mg(MAA)₂], which was added into SBR directly or prepared in situ in SBR through the neutralization of magnesium oxide (MgO) and methacrylic acid (MAA). The experimental results show that the SBR vulcanizates reinforced by Mg(MAA)₂ prepared in situ have better mechanical properties than those reinforced by Mg(MAA)₂ added directly. The SBR vulcanizates with Mg(MAA)₂ prepared in situ are semi-transparent, but those with Mg(MAA)₂ added directly are opaque. The Fourier transform infrared analysis shows that the polymerization conversion of Mg(MAA)₂ in the SBR vulcanizates with Mg(MAA)₂ prepared in situ is much higher than that in the SBR vulcanizates with Mg(MAA)₂ added directly. The scan probe microscopy photographs show that the particles in the SBR vulcanizates with Mg(MAA)₂ prepared in situ are much finer and disperse more evenly than that in the SBR vulcanizates with Mg(MAA)₂ added directly.     

Systematic investigation of the hydrothermal syntheses of Pr(III)-PDA (PDA = pyridine-2,6-dicarboxylate anion) metal-organic frameworks

A series of novel two-dimensional (2D) and three-dimensional (3D) praseodymium coordination polymers, namely, {[Pr3(PDA)4(HPDA)(H2O)8] x 8H2O}n (2), {[Pr2(PDA)3(H2O)3] x H2O}n (3), {[Pr(PDA)(H2O)4] x ClO4}n (4), and { [Pr2(PDA)2(H2O)5SO4] x 2H2O}n (5) (PDA = pyridine-2,6-dicarboxylic anion), was designed and synthesized under hydrothermal conditions. Complexes 1-3 (chainlike polymer, {[Pr(PDA)(HPDA)(H2O)2] x 4H2O}n (1) was also obtained independently by us, although it has been reported recently by Ghosh et al.) were fabricated successfully by simply tuning the Pr/PDA ratio and exhibited various and intriguing topological structures from a 1D chain to a 3D network. While the synthetic strategy of 5 was triggered and further performed only after 1 was structurally characterized. The complexes were characterized by X-ray single-crystal determination, spectroscopic, and variable-temperature magnetic susceptibility analyses. In complex 2 an unusual nanosized square motif as a building block constructed by eight Pr ions was further assembled into a highly ordered 2D grid compound. In complex 3 the decanuclear Pr metal-based structure as a repeat unit interpenetrated to form a novel 3D polymer. Complex 4 was a 3D network polymer fabricated through a hexanuclear Pr ring as a building block, and ClO4- anions as guests were trapped in the cavity. In complex 5 six Pr atoms, two SO4(2-) anions, and carboxylic oxygen bridges constructed an intriguing rectangle structure as a repeat unit in the grid to form a 2D coordination polymer in which the unique bi-bidentate coordination mode of SO4(2-) anion was observed.     

Immobilized cobalt/rhodium heterobimetallic nanoparticle-catalyzed silylcarbocylization and carbonylative silylcarbocyclization of 1,6-enynes

Reaction of 1,6-enynes with a hydrosilane in the presence of immobilized cobalt/rhodium bimetallic nanoparticles gives 2-methyl-1-silylmethylidene-2-cyclopentanes in the absence of carbon monoxide and 2-formylmethyl-1-silylmethylidene-2-cyclopentanes under 1 atm of carbon monoxide, respectively. [reaction: see text]     

Chemical Constituents from Cynoglossum gansuense

Two new alkaloids, i.e., (2,3‐dihydro‐1‐oxo‐1H‐pyrrolo[1,2‐a]pyrrol‐7‐yl)methyl (2S*,3S*)‐3‐[(β‐D ‐glucopyranosyl)oxy]‐2‐hydroxy‐2‐(1‐methylethyl)butanoate ( 1 ) and 1,2‐dihydro‐8‐methoxy‐2‐oxoquinoline‐4‐carboxylic acid ( 2 ), were isolated from the alcoholic extract of the whole plant of Cynoglossum gansuense, together with twelve known compounds Their structures were characterized by means of spectroscopic methods, especially by ¹H‐, ¹³C‐, and 2D‐NMR, as well as by HR‐MS experiments and comparison with literature data.     

Facile generation of platinum(IV) compounds with mixed labile moieties. Hydrogen peroxide oxidation of platinum(II) to platinum(IV) compounds

Hydrogen peroxide oxidation of platinum(II) compounds containing labile groups such as Cl, OH, and alkene moieties has been carried out and the products characterized. The reactions of [Pt^II (X)₂ (N–N)] (X = Cl, OH, X₂ = isopropylidenemalorate (ipm); N–N 2,2-dimethyl-1,3-propanediamine [(dmpda), N-isopropyl-1,3-propanediamine (ippda)] with hydrogen peroxide in an appropriate solvent at room temperature affords [Pt^IV (OH)(Y)(X)₂(N–N)] (Y = OH, OCH₃). The crystal structures of [Pt^IV(OH)(OCH₃)(Cl)₂(dmpda)]·2H₂O (P-1 bar, a = 6.339(2) Å , b = 9.861(1) Å, c = 11.561(1) Å, a = 92.078(9)°, β = 104.78(1)°, γ=100.54(1)°, V = 684.3(2) ų, Z = 2R = 0.0503) and [Pt^IV(OH)₂(ipm)(ippda)]·3H₂O (C 2/c, a = 27.275(6) Å, b=6.954(2) Å, c = 22.331(4) Å, β = 118.30(2)°, V = 3729(2) ų, Z = 8, R = 0.0345) have been solved and refined. The local geometry around the platinum(IV) atom approximates to a typical octahedral arrangement with two added groups (OH and OCH₃; OH and OH) in a transposition. The platinum(IV) compounds with potential labile moieties may be important intermediate species for further reactions.     

Sequential actions of cobalt nanoparticles and palladium(II) catalysts: three-step one-pot synthesis of fenestranes from an enyne and an alkyne diester

A three-step one-pot synthesis of fenestranes from a readily available enyne and an alkyne diester has been carried out with cobalt nanoparticles and palladium(II) as catalysts.     

Fluoride-facilitated deuterium exchange from DMSO-d6 to polyamide-based cryptands

Multiple deuterium exchange between DMSO-d6 and amide hydrogens in two hexaamido cryptand fluoride receptors has been verified by 19F and 2H NMR and FAB mass spectral studies. Structural results for one of the complexes indicate a tricapped trigonal prism hydrogen bond coordination geometry around an encapsulated fluoride, with hydrogen bonds from fluoride to six amide and three phenyl hydrogens.     

Two New Xanthone Glycosides from Polygala tenuifolia

Two new xanthone glycosides,polygalaxanthone IV and V were isolated from the roots of Polygala tenuifolia Willd. Their structures were established as 6-O-[α-L-rhamnopyranosyl-(1→2)-β-D-glucopyranosyl]-1-hydroxy-3,7-dimethoxyxanthone(polygalaxanthone IV), and 6-O-[α-L-rhamnopyranosyl-(1→2)-β-D-glucopyranosyl]-1,3-dihydroxyl-7-methoxyxanthone (polyga-laxanthone V),respectively, on the basis of chemical and spectral evidence.     

Determination of atrazine, desethyl atrazine and desisopropyl atrazine in environmental water samples using hollow fiber-protected liquid-phase microextraction and high performance liquid chromatography

A new method based on hollow fiber-protected liquid-phase microextraction (LPME) was developed for the simultaneous determination of atrazine, desethyl atrazine and desisopropyl atrazine in environmental water samples. In LPME, analytes were extracted into 1-octanol immobilized in the micropores of a poly(vinylidene fluoride) porous hollow fiber membrane, and back extracted into the acceptor (4 M HCl) filled in the lumen of the hollow fiber. After LPME, the analytes trapped in the acceptor were analyzed with high-performance liquid chromatography after neutralization. The effect of extraction factors such as sample pH, acceptor pH, salinity, extraction time, stirring rate, and humic acid were studied. Under the optimized conditions, the limits of detection and relative standard deviations were respectively in the range of 0.5–1.0 μg L⁻¹ and 3.9–4.7% (n = 5). The proposed method was applied to determine atrazine, desethyl atrazine and desisopropyl atrazine in wastewater and groundwater samples. The three analytes were below the limits of detection, but good relative spiked recoveries over 90.1 ± 5.9% at 5 μg L⁻¹ spiked level were obtained.     

Adsorption, desorption and activities of acid phosphatase on various colloidal particles from an Ultisol

Adsorption, desorption and activity of acid phosphatase on various soil colloidal particles and pure clay minerals were studied. Higher adsorption amounts and low percentage of desorption of acid phosphatase were found on fine soil clays (<0.2 μm). Electrostatic force and ligand exchange are the major driving forces that are involved in the adsorption of enzymes on soil clays. More enzyme molecules were adsorbed on soil clays in the presence of organic components. However, enzymes on organic clays were more easily released. One-third of the enzyme on goethite was adsorbed via ligand exchange process. Some other interactions, such as van der Waals force, hydrophobic force and hydrogen bonding may be more important in the adsorption of enzyme on kaolinite and the enzyme in this system cannot be easily removed. Coarse clays (0.2–2 μm) and inorganic soil clays had higher affinities for enzyme molecules than fine clays and organic clays, respectively. The activity of enzyme bound on soil clays was inhibited and the thermal stability was increased in the presence of organic matter. Data obtained in this study are helpful for a better understanding of the interactions of enzymes with inorganic and organic constituents in soil and associated environments.