Computation of Rotation Matrices Making Lined‐Up to the Local Cartesian Coordinates

Rotation matrices were expressed in terms of Gaunt coefficients and complex spherical harmonics. The rotation matrices were calculated using two different ways. In the first, Gaunt coefficients and normalized complex spherical harmonics were directly calculated using binomial coefficients; in the second, Gaunt coefficients and complex spherical harmonics were recursively calculated. The methods were compared with respect to accuracy and computation time (CPU) for low and very high quantum numbers.     

Thermal decompositions of some divalent transition metal complexes of triethanolamine

The thermal behaviours of the Ti(II), Mn(II), Fe(II), Ni(II), Cu(II) and Zn(II) complexes of triethanolamine were studied by means of thermogravimetry, differential thermogravimetry, differential thermal analysis infrared spectrophotometry and elemental analysis. The sequence of thermal stability of the metal complexes, determined by using the initial decomposition temperature, was found to be Ti(II)?Mn(II)>Fe(II)>Ni(II)>Zn(II)>Cu(II). Some of the kinetic parameters, such as the activation energy and order of reaction for the initial decomposition reaction, were calculated and the relationship between the thermal stability and the chemical structure of the complexes is discussed.     

Preliminary Analyses of Radionuclides in Afşin-Elbistan Lignite Samples

This preliminary study describes the concentration of radionuclides ²³⁸U, ²³²Th, ⁴⁰K, and ²²⁶Ra in Afin-Elbistan lignite samples which are primarily used for power generation in the Afin-Elbistan Coal-Fired Power Plant. The results show that the concentration of ²³⁸U is higher in the Afin-Elbistan lignite compared to various world coals whereas the opposite is observed with ²³²Th and ⁴⁰K.     

Trace and major element compositions of Black Sea aerosol

Instrumental neutron activation analysis (INAA), flame atomic absorption spectrometry (FAAS), flame atomic emission spectrometry (FAES), graphite furnace atomic absorption spectrometry (GF-AAS), ion chromatography (IC) and visible spectrometry (VIS) were used to determine the composition of atmospheric aerosols, collected at a rural site in the Western Black Sea Coast of Turkey. A total of 354 daily aerosol samples were analyzed for 46 trace and major elements and ions. Sample preparation, quality control procedures, instrumental operating conditions for INAA and source apportionment work is presented.     

Diterpenoid Alkaloids of Delphinium buschianum Grossh.

From the aerial parts of Delphinium buschianum Grossh ., collected in Turkey, a new diterpenoid alkaloid 1 , named budelphine, was isolated along with the known diterpenoid alkaloids karakoline ( 2 ), 18‐hydroxy‐14‐O‐methylgadesine ( 3 ), delsoline ( 4 ), lapaconidine ( 5 ), columbianine ( 6 ), 14‐benzoylneoline ( 7 ), and hetisine ( 9 ). The structure of 1 was established on the basis of ¹H‐, ¹³C‐, DEPT, ¹H,¹H‐COSY, NOESY, HSQC, and HMBC NMR studies.     

Hydrophobic cryogels for DNA adsorption: Effect of embedding of monosize microbeads into cryogel network on their adsorptive performances

As alternative hydrophobic adsorbent for DNA adsorption, supermacroporous cryogel disks were synthesized via free radical polymerization. In this study, we have prepared two kinds of cryogel disks: (i) poly(2‐hydroxyethyl methacrylate‐N‐methacryloyl‐l ‐tryptophan) [p(HEMA‐MATrp)] cryogel containing specific hydrophobic ligand MATrp; and (ii) monosize p(HEMA‐MATrp) particles synthesized via suspension polymerization embedded into p(HEMA) cryogel structure to obtain p(HEMA‐MATrp)/p(HEMA) composite cryogel disks. These cryogel disks containing hydrophobic functional group were characterized via swelling studies, Fourier transform infrared spectroscopy, elemental analysis, surface area measurements and scanning electron microscopy. DNA adsorption onto both p(HEMA‐MATrp) cryogel and p(HEMA‐MATrp)/p(HEMA) composite cryogels was investigated. Maximum adsorption of DNA on p(HEMA‐MATrp) cryogel was found to be 15 mg/g polymer. Otherwise, p(HEMA‐MATrp)/p(HEMA) composite cryogels significantly increased the DNA adsorption capacity to 38 mg/g polymer. Composite cryogels could be used repeatedly without significant loss on adsorption capacity after 10 repetitive adsorption–desorption cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

New analytical expressions,symmetry relations and numerical solutions for the rotational overlap integrals

In this article, extremely simple analytical formulas are obtained for rotational overlap integrals which occur in integrals over two reduced rotation matrix elements. The analytical derivations are based on the properties of the Jacobi polynomials and beta functions. Numerical results and special values for rotational overlap integrals are obtained by using symmetry properties and recurrence relationships for reduced rotation matrix elements. The final results are of surprisingly simple structures and very useful for practical applications. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Structural and transport properties of Sn–Mg alloys

In this work, the structural and transport properties of Mg-doped Sn-based alloys have been investigated. The temperature-dependent transport and structural properties of Sn–Mg alloys were investigated for five different samples (Pure Sn, Sn-1.0 wt% Mg, Sn-2.0 wt% Mg, Sn-6.0 wt% Mg and Pure Mg). Scanning electron microscopy (SEM), X-ray diffraction and energy dispersive X-ray analysis measurements were carried out in order to clarify the structural properties of the samples. It was found that the samples had tetragonal crystal symmetry, except for pure Mg which had hexagonal crystal symmetry. We also found that the cell parameters changed slightly with the addition of Mg element. The SEM micrographs of the samples showed that they had smooth surfaces with a clear grain boundary. The electrical and thermal conductivity of the samples were measured by four-point probe and the radial heat flow method, respectively. The electrical resistivity of the samples increased almost linearly with the increasing temperature. The thermal conductivity values ranged between 0.60 and 1.00 W/Km, while they decreased slightly with temperature and increased with Mg composition. The thermal conductivity values of the alloys were in between the values of pure Sn and Mg. The thermal conductivity results of the alloys were compared with other available results, and a good agreement was seen between the results. In addition, the temperature coefficients of electrical resistivity and thermal conductivity were determined; these were independent of the composition of the alloying elements.