Fast chromatographic method for the determination of dyes in beverages by using high performance liquid chromatography—Diode array detection data and second order algorithms

A fast chromatographic methodology is presented for the analysis of three synthetic dyes in non-alcoholic beverages: amaranth (E123), sunset yellow FCF (E110) and tartrazine (E102). Seven soft drinks (purchased from a local supermarket) were homogenized, filtered and injected into the chromatographic system. Second order data were obtained by a rapid LC separation and DAD detection. A comparative study of the performance of two second order algorithms (MCR-ALS and U-PLS/RBL) applied to model the data, is presented. Interestingly, the data present time shift between different chromatograms and cannot be conveniently corrected to determine the above-mentioned dyes in beverage samples. This fact originates the lack of trilinearity that cannot be conveniently pre-processed and can hardly be modelled by using U-PLS/RBL algorithm. On the contrary, MCR-ALS has shown to be an excellent tool for modelling this kind of data allowing to reach acceptable figures of merit. Recovery values ranged between 97% and 105% when analyzing artificial and real samples were indicative of the good performance of the method. In contrast with the complete separation, which consumes 10 mL of methanol and 3 mL of 0.08 mol L⁻¹ ammonium acetate, the proposed fast chromatography method requires only 0.46 mL of methanol and 1.54 mL of 0.08 mol L⁻¹ ammonium acetate. Consequently, analysis time could be reduced up to 14.2% of the necessary time to perform the complete separation allowing saving both solvents and time, which are related to a reduction of both the costs per analysis and environmental impact.     

On-line double isotope dilution laser ablation inductively coupled plasma mass spectrometry for the quantitative analysis of solid materials

We report on the determination of trace elements in solid samples by the combination of on-line double isotope dilution and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The proposed method requires the sequential analysis of the sample and a certified natural abundance standard by on-line IDMS using the same isotopically-enriched spike solution. In this way, the mass fraction of the analyte in the sample can be directly referred to the certified standard so the previous characterization of the spike solution is not required. To validate the procedure, Sr, Rb and Pb were determined in certified reference materials with different matrices, including silicate glasses (SRM 610, 612 and 614) and powdered samples (PACS-2, SRM 2710a, SRM 1944, SRM 2702 and SRM 2780). The analysis of powdered samples was carried out both by the preparation of pressed pellets and by lithium borate fusion. Experimental results for the analysis of powdered samples were in agreement with the certified values for all materials. Relative standard deviations in the range of 6–21% for pressed pellets and 3–21% for fused solids were obtained from n = 3 independent measurements. Minimal sample preparation, data treatment and consumption of the isotopically-enriched isotopes are the main advantages of the method over previously reported approaches.     

Interference of ruthenium red analogues at photosystem II of spinach thylakoids

The effect of ruthenium red analogues on several thylakoid photosynthetic activities has been investigated. RR, RV, RRPh1, RRPh2 and Ph inhibit ATP synthesis and electron flow from water to MV (basal, phosphorylating and uncoupled) as their concentration increases, thus, they act as a Hill reaction inhibitor. They inhibit uncoupled electron transport through PSII from water to DCPIP and partially from DPC to DCPIP. However, these compounds do not affect uncoupled PSI electron transport from DCPIP to MV. Therefore, the target of interaction is at the level of OEC and the span P(680) to Q(A) for RR, RRPh1 and RRPh2. Chlorophyll a fluorescence studies corroborate the already found interference sites and may affect the disconnection between chlorophyll molecules within the LHCII and/or between antennae and RCs, or decreases the exciton to reach the RC and inhibition of PSII occurs. RRPh2 is six times more active than RR. Finally, Ph inhibits electron flow interacting at the level of Q(B).     

Convolutional Neural Network Approach for Multispectral Facial Presentation Attack Detection in Automated Border Control Systems

Automated border control systems are the first critical infrastructure point when crossing a border country. Crossing border lines for unauthorized passengers is a high security risk to any country. This paper presents a multispectral analysis of presentation attack detection for facial biometrics using the learned features from a convolutional neural network. Three sensors are considered to design and develop a new database that is composed of visible (VIS), near-infrared (NIR), and thermal images. Most studies are based on laboratory or ideal conditions-controlled environments. However, in a real scenario, a subject’s situation is completely modified due to diverse physiological conditions, such as stress, temperature changes, sweating, and increased blood pressure. For this reason, the added value of this study is that this database was acquired in situ. The attacks considered were printed, masked, and displayed images. In addition, five classifiers were used to detect the presentation attack. Note that thermal sensors provide better performance than other solutions. The results present better outputs when all sensors are used together, regardless of whether classifier or feature-level fusion is considered. Finally, classifiers such as KNN or SVM show high performance and low computational level.     

Bioactive Compounds from Pale Ale Beer Powder Attenuate Experimental Colitis in BALB/c Mice

Phenolic compounds (PCs) present in foods are associated with a decreased risk of developing inflammatory diseases. The aim of this study was to extract and characterize PCs from craft beer powder and evaluate their potential benefits in an experimental model of inflammatory bowel disease (IBD). PCs were extracted and quantified from pure beer samples. BALB/c mice received either the beer phenolic extract (BPE) or beer powder fortified with phenolic extract (BPFPE) of PCs daily for 20 days by gavage. Colon samples were collected for histopathological and immunohistochemical analyses. Dextran sodium sulfate (DSS)-induced mice lost more weight, had reduced colon length, and developed more inflammatory changes compared with DSS-induced mice treated with either BPE or BPFPE. In addition, in DSS-induced mice, the densities of CD4- and CD11b-positive cells, apoptotic rates, and activation of NF-κB and p-ERK1/2 MAPK intracellular signaling pathways were higher in those treated with BPE and BPFPE than in those not treated. Pretreatment with the phenolic extract and BPFPE remarkably attenuated DSS-induced colitis. The protective effect of PCs supports further investigation and development of therapies for human IBD.     

Quantitative determination of alpha(s2)- and alpha(s1)-casein in goat's milk with different genotypes by capillary electrophoresis

A capillary electrophoresis (CE) method has been applied for the quantitative determination of alpha(s1)- and alpha(s2)-CN in goat's milk. Several analytical parameters were evaluated showing the reliability of this CE method. Coefficients of determination (R2) greater than 99% were obtained and determination limits of 1.23 and 0.98 mg/ml were achieved for alpha(s1)- and alpha(s2)-CN, respectively. The analytical parameters studied in terms of accuracy, precision and recovery were within acceptable limits. Among 18 samples of 4 different genotypes (BB, EE, BF and FF) for alpha(s1)-CN were analysed, different amounts were obtained from the genotypes.     

A Click Approach to Polymetallic Chromium(0) and Tungsten(0) Fischer‐Carbene Complexes and Their Use in the Synthesis of Functionalized Polymetallic Metal?Carbene Complexes

Alkynylamino Cr⁰ and W⁰ Fischer carbenes undergo a CuAAC reaction with a diverse range of di‐, tri‐, and tetra‐azides to produce polymetallic chromium(0) and tungsten(0) (Fischer)‐carbene complexes in good‐to‐excellent yields. This method is simple, versatile, and is suitable for the preparation of a diverse range of structures with a high level of symmetry. Moreover, the resulting polymetallic carbene complexes are suitable partners for the peripheral functionalization of the metal nuclei, whilst retaining the metal fragment. This fact has been demonstrated in a simultaneous Pauson–Khand reaction, which, in some cases, allows for the generation of four bicyclic [5,5] rings on the periphery of a tetrametallic molecule in a process that involves the formation of 12 new C? C bonds, with four simultaneous CO‐insertion processes. The electrochemistry of the polymetallic Fischer carbenes show completely independent behavior for each nucleus, as well as an anomalous observation of the reversible oxidation of the allyl substituents, which has not been reported before in this class of chemistry.     

Porosity development in chars from thermal degradation of poly(p-phenylene benzobisoxazole)

The main objective of this work was to investigate porosity development in carbonaceous materials formed by thermal degradation of the high thermal stability polymer, poly(p-phenylene benzobisoxazole) (PBO). Two varieties of PBO, as-spun (AS) and high-modulus (HM) were studied. Chars obtained at various polymer decomposition temperatures (selected on the basis of thermogravimetric and differential thermal analysis results) were characterized by elemental analysis, infrared spectroscopy, X-ray diffraction and CO₂ adsorption at 273 K. The obtained adsorbents essentially contained narrow micropores, and maximum pore development took place at ca. 1000 K, when the polymer was not yet completely decomposed. At higher temperatures, there is a certain pore widening along with a displacement towards smaller pore sizes, and the pore volume significantly decreases.     

Development of an analytical methodology to quantify melamine in milk using micellar liquid chromatography and validation according to EU Regulation 2002/654/EC

Melamine is a toxic triazine, illegally used as an additive in milk to apparently increase the amount of protein. A chromatographic procedure using a C18 column and a micellar mobile phase of sodium dodecyl sulphate (0.05 M) and propanol (7.5%), buffered at pH 3, and a detection set by absorbance at 210 nm, was reported for the resolution and quantification of melamine in liquid and powdered milk samples. In this work, samples were diluted with a SDS solution and were directly injected, thus avoiding long extraction and experimental procedures. Melamine was eluted in nearly 9.3 min without overlapping the protein band or other endogeneous compounds. The optimal mobile phase composition was taken using a chemometrical approach that considers the retention factor, efficiency and peak shape. Validation was performed following the European Commission's indications (European Decision 2002/657/EC), and the main analytical parameters studied were: linearity (0.02-100 ppm; r² = 0.999), limit of detection (5 ppb), intra- and inter-day precision (R.S.D. <7.6% and <9.7%, respectively) and robustness (R.S.D. <7.4% for retention time and <5.0% for area). Sensitivity was adequate to detect melamine under the safety limits proposed by the US FDA. Finally, recoveries for several milk samples were found in the 85-109% range.     

Candida rugosa lipase Lip1–polyethyleneglycol interaction and the relation with its partition in aqueous two-phase systems

The interaction between a lipase from Candida rugosa (Lip1) and polyethyleneglycols of different molecular masses was studied using fluorescence and circular dichroism approaches in order to be applied to the analysis of the enzyme partition mechanism in aqueous two-phase systems of polyethyleneglycol–potassium phosphate. The decrease of the partition coefficients with the polyethyleneglycol molecular mass showed that the enzyme partition is driven by the excluded volume effect and not by the enzyme–polymer interaction. The polymer did not affect the secondary and tertiary structure of the enzyme nor its biological activity. The lipase from Candida rugosa lyophilizate was partitioned in favour of the polyethyleneglycol rich phase; PEG 2000 being the system which showed the better enzyme recovery (78.26%) with a purification factor of 2.3. This method could be applied as a first step to isolate the enzyme from a culture medium with good recovery and without modifying the enzymatic capacity and the molecular structure.