Poly(4‐vinylbenzoyl azide): A New Isocyanato Group Generating Polymer

4‐Vinylbenzoyl azide was synthesized from p‐vinylbenzoic acid and polymerized by free radical polymerization. The obtained polymer contained acyl azide groups which were thermally transformed to the corresponding isocyanato groups. Reactions on these polymers with ethanol, hydroxyethyl methacrylate and 1‐pyrenebutanol proceeded quantitatively. Time‐resolved FT‐IR studies of the reactions with ethanol were carried out by varying the concentration and temperature. The effect of the solvent polarity on the Curtius rearrangement was investigated.

     

链珠状氢氧化亚镍的准电容特性及其在复合型超电容器中的应用(英)

本文采用溶胶凝聚方法制备了超细氢氧化亚镍电极材料并通过在其中掺加适量碳纳米管的方法大大提高了电极的比容量并有效改善了电极材料的阻抗特性。掺有20%碳纳米管的氢氧化亚镍复合电极材料的单电极比容量可达到320 F·g^-1。本文分别采用氢氧化亚镍/碳纳米管复合电极作为正极，活性炭作为负极，6 mol·L^-1 KOH作为电解液制备了复合型电化学电容器。采用上述方法制备的复合型电容器工作电压达到1.6 V，电容器质量比容量达到60 F·g^-1。复合型电容器能量密度达到20.11 Wh·kg^-1，最大功率密度达到8.6 kW·kg^-1,兼具高能量特性和优良的大电流放电特性。     

纳米Zn-Co铁氧体的固相合成及电磁损耗特性研究

采用NH₄HCO₃与FeCl₃·6H₂O，Zn(NO₃)₂·6H₂O，Co(NO₃)₂·6H₂O进行室温固相反应制得前驱物，经微波加热处理后，进而热分解分别制得复合氧化物ZnFe₂O₄、CoFe₂O₄和Co_0.5Zn_0.5Fe₂O₄。由激光粒度分析仪、XRD和SEM表征：获得了颗粒分布比较均一、平均粒度为65 nm左右、立方晶系尖晶石结构的纳米铁氧体粉体。经测试样品的相对介电常数和相对磁导率后，研究了它们的电磁损耗特性。结果表明：Co_0.5Zn_0.5Fe₂O₄在100～1 800 MHz内比另外两种铁氧体具有更好的电磁损耗特性。     

PMMA/定向碳纳米管复合材料导电与导热性能的研究

Methyl Methacrylate(MMA) has been filled in the apertures of aligned carbon nanotubes(ACNTs). Then PMMA/ACNTs composites have been synthesized by in-situ polymerization. The SEM results show that carbon nanotubes are well dispersed and directionally arranged in the composites. The electrical conductivities of the parallel direction (parallel with ACNTs) and perpendicular direction (perpendicular with ACNTs) of composites were respectively tested to be 15 S·cm^-1 and 4 S·cm^-1, so the composites were conductivity anisotropic. Compared with PMMA, the thermal stable temperature of composites in air was improved by 100 ℃,and the thermal conductivity of composites was 13.64 times of PMMA.     

锂离子电池正极材料层状LiMn02的掺杂改性

层状LiMnO2具有成本低、无毒和比容量高等优点,是一种非常有发展前景的正极材料.本文介绍了近年来国内外层状LiMnO2的研究进展.主要阐述了层状LiMnO2的结构与性能的关系.结合笔者的工作,着重探讨了离子掺杂改性对层状LiMno2的电化学性能的影响.最后,简要指明了层状LiMnO2将来的可能研究方向.     

DBM-FsaA的合成及在热镀锌合金中微量铈分析的应用

锌合金中微量铈含量的测定,由于大量Zn^2 的存在而产生干扰,给选择合适的测定方法带来困难。虽然在分光光度法方面有关铈的微量分析研究已有报道,应用的显色剂主要有偶氮砷类,偶氮氯磷类等。但对于给定锌合金这一材料体系中微量铈的测定却少有报道。     

活性炭载体的超声波处理对钌/活性炭氨合成催化剂催化性能的影响

 利用超声波处理活性炭,并采用场发射扫描电镜、X射线能谱、N2物理吸附和CO化学吸附等表征手段,考察了超声波处理对活性炭表面形貌、化学组成、表面织构和催化剂钌分散度的影响. 以超声波处理的活性炭为载体,以钡和钾为助剂制备了一系列钌基氨合成催化剂,在10.0 MPa,10000 h-1和400 ℃的条件下进行了氨合成活性评价. 结果表明,超声波处理可有效除去活性炭表面的杂质,提高中孔比表面积占BET比表面积的比例. 超声波处理50 min的活性炭表面的杂质含量较低,中孔比表面积适中,以其为载体制备的钌基催化剂的活性较高,催化氨合成反应速率可达94.8 mmol/(g·h).     

硬质聚氯乙烯氧指数标准物质的研制

研制硬质聚氯乙烯(硬质PVC)氧指数标准物质。对制备技术、均匀性检验、稳定性考察及定值不确定度进行了分析。研制的硬质PVC标准物质具有良好的均匀性和稳定性,定值数据呈正态分布,各实验室数据等精度。硬质PVC标准物质氧指数标准值为43．6％,扩展不确定度为0．7％。     

Determination of chondroitin sulfate content in raw materials and dietary supplements by high-performance liquid chromatography with ultraviolet detection after enzymatic hydrolysis: single-laboratory validation

A method to quantify chondroitin sulfate in raw materials and dietary supplements at a range of about 5 to 100% (w/w) chondroitin sulfate has been developed and validated. The chondroitin sulfate is first selectively hydrolyzed by chondroitinase ACII enzyme to form un-, mono-, di-, and trisulfated unsaturated disaccharides; the resulting disaccharides are then quantified by ion-pairing liquid chromatography with ultraviolet detection. The amounts of the individual disaccharides are summed to yield the total amount of chondroitin sulfate in the material. Single-laboratory validation has been performed to determine the repeatability, accuracy, selectivity, limit of detection, limit of quantification, ruggedness, and linearity of the method. Repeatability precision for total chondroitin sulfate content was between 1.60 and 4.72% relative standard deviation, with HorRat values between 0.79 and 2.25. Chondroitin sulfate recovery from raw material negative control was between 101 and 102%, and recovery from finished product negative control was between 105 and 106%.     

Binary colloidal crystals with a wide range of size ratios via template-assisted electric-field-induced assembly

Here we present a simple but general method for constructing complex binary colloidal crystals with an almost full range of size ratios, which is referred to as "template-assisted electric-field-induced assembly (TAEFIA)". The dependence of the structures of binary colloidal crystals on size ratio (gamma) and volume fraction (varphi) of the colloidal suspension was investigated. Binary colloidal crystals with gamma ranges from 0.10 to 0.91 were fabricated, and an attempt to fabricate a triple colloidal crystal via TAEFIA was presented. We suggest that TAEFIA is a versatile way to grow colloidal crystals with binary or more complex structures.