Cyclic Voltammograms of Ferrocene on Multi‐Walled Carbon Nanotubes (MWCNTs)‐Modified Edge Plane Pyrolytic Graphite (EPPG) Electrode in Room Temperature Ionic Liquids (RTILs) of 1‐Ethyl‐3‐Methylimidazolium Tetrafluoroborate (EMIBF4)

In this work, the electrochemical behavior of ferrocene (Fc) was investigated by cyclic voltammetry (CV) in room temperature ionic liquids (RTILs) of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄) on glass carbon (GC), edge plane pyrolytic graphite (EPPG) and multi‐walled carbon nanotube (MWCNTs)‐modified EPPG electrodes, respectively. The results demonstrated that on GC electrode, pairs of well‐defined reversible peaks were observed, while for the electrode of EPPG, the peak potential separation (ΔE_p) is obviously larger than the theoretical value of 59 mV, hinting that the electrode of EPPG is distinguished from the commonly used electrode, consistent with the previous proposition that EPPG has many “defects”. To obtain an improved electrochemical response, multi‐walled carbon nanotubes (MWCNTs) were modified on the electrode of EPPG; the increased peak current and promoted peak potential separation not only proved the existence of “defects” in MWCNTs, but also supported that “creating active points” on an electrode is the main contribution of MWCNTs. Initiating the electrochemical research of Fc on the MWCNTs‐modified EPPG electrode in RTILs and verifying the presence of “defects” on both EPPG and MWCNTs using cyclic voltammograms (CVs) of Fc obtained in RTILs of EMIBF₄, is the main contribution of this preliminary work.     

Rheological Behavior for Mica-filled Polypropylene Composite Melts

The study on rheological properties of a series of mica-filled polypropylene (PP) composites was carried out. The influence of surface-treatment of mica particles on dynamic rheological behavior of the composites were dealt with. The viscosity (η) and dynamic modulus ( G‘ ) of the composite melts were higher than those of PP matrix, especially those for systems treated with silane, which was attributed to the interfacial adhesion enhancement. However, surface-treatment of mica by titanate resulted in lower η and G‘, as compared with the treatment by silane. The reason for this is believed to be the formation of the mono-molecular layer on the mica surface.     

P(St-co-MAA)乳液体系对CaCO3结晶的调控

大量研究表明, 有机/无机界面上的相互作用[1]是控制无机结晶的晶型、形貌、粒径等特征的决定因素. 本文利用乳液聚合方法合成了在诱导无机矿化后依然保持较为刚性界面的、能与无机离子作用的微球, 并在乳液中进行碳酸钙结晶实验, 用XRD, FTIR和SEM等手段对结晶进行了表征.     

微孔中简单流体粘度的分子动力学模拟及关联模型

用分子动力学模拟计算了微孔介质中流体氩在不同温度、不同密度和不同孔径下的剪切粘度.并根据Chapman-Enskog关于硬球流体传递性质的理论以及Heyes的关于Lennard-Jones流体粘度的表达式,提出了两个描述微孔介质中流体粘度的模型,该模型可以计算微孔中流体氩在不同状态下的粘度值.通过与计算机模拟值的比较,证明这两个微孔流体粘度模型是可用的.     

A small molecule with osteogenesis-inducing activity in multipotent mesenchymal progenitor cells

Purmorphamine, which is a 2,6,9-trisubstituted purine compound, was discovered through cell-based high-throughput screening from a heterocycle combinatorial library. It differentiates multipotent mesenchymal progenitor cells into an osteoblast lineage. It will serve as a unique chemical tool to study the molecular mechanisms of osteogenesis of stem cells and bone development.     

Highly flexible polyelectrolyte nanotubes

A pressure-filter-template approach was employed to prepare polyelectrolyte nanotubes through layer-by-layer deposition in the alumina template. With the thicker wall, the ordered polymer nanotubes possess a high flexibility. The results demonstrate that the electrostatic interactions of polyelectrolytes play a key role in fabricating water-soluble charged polymer nanotubes. The structure of the polyelectrolyte nanotube was confirmed by SEM, TEM, and UV, respectively.     

Four New Nortriterpenoids from Phlomis umbrosa

Four new 28‐noroleanane‐derived spirocyclic triterpenoids, compounds 1 – 4 , were isolated from the rhizomes of Phlomis umbrosa. Their structures were elucidated on the basis of 1D‐ and 2D‐NMR analyses, in combination with high‐resolution MS experiments.     

Reactivity Ratios of Diethyldiallylammonium Chloride with Acrylamide or Acrylic Acid

The compositions of copolymers of diethyldiallylammonium chloride (DEDAAC) with acrylamide (AM), acrylic acid (AA) or sodium acrylic acid (NaAA) at low conversion were determined by elemental analysis, and the reactivity ratios of monomers in copolymerization were obtained by Kelen-Tudos method. The results showed that the reactivity ratios rDE and rAM are 0.31 and 5.27 for DEDAAC with AM, rDE and rAA are 0.28 and 5.15 for DEDAAC with AA, and rDE and rNaAA are 0.40 and 3.97 for DEDAAC with NaAA, respectively. The copolymerizations for DEDAAC with AM, AA or NaAA are non-ideal copolymerization and the products are random copolymers.     

Electron tunneling through molecular media: a density functional study of Au/Dithiol/Au systems.

We report a density functional theory study of the electronic properties of n-alkanedithiols (CnS2, with n=4, 8 and 12) sandwiched between two Au(111) infinite slab electrodes. We investigate the influence of the distance between the two electrodes and of the molecular chain length, tilt angle, and coverage on the local density of states (LDOS) at the Fermi energy (E(f)). We find that the (small) value of the LDOS at Ef near the center of the molecular wires--a quantity that is related to the tunneling current--is mainly determined by the length n of the alkane chains: it originates from the tails of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) which are broadened by the interaction with the electrodes, and decays exponentially with the length of the molecular wire. This opens a nonresonance tunneling channel for charge transport at small bias voltages. While the length of the hydrocarbon chain appears to be the determining factor, the tilt angle of the molecular wires with respect to the electrode surfaces, and therefore the distance between these, has a small influence on the LDOS at the center of the molecule, while the effect of coverage can be ignored. The picture which emerges from these calculations is totally consistent with a through-bond tunneling mechanism.     

Studies on the atom transfer radical polymerization of a maleimide AB* monomer and modification of the halogen end groups

The atom transfer radical polymerization (ATRP) of an AB* monomer, N-(4-α-bromobutyryloxy phenyl)maleimide (BBPMI), was conducted using the complex of CuBr/2,2′-bipyridine as catalyst. The study of kinetics of polymerization and the growth behavior of macromolecules show that the polymerization proceeds rapidly in first 1 h and then slows down. The decrease in the rate of polymerization is ascribed to the poor reactivity of maleimide radicals from A* to initiate the polymerization of maleimide double bonds. The molecular weight of the resulting polymer also increases with the dosage of catalyst. The coincidence of molecular weight determined by hydrogen proton nuclear magnetic resonance spectroscopy (¹H NMR) and gel permeation chromatography (GPC) proves that the resulting polymer is of linear structure, which is further verified by ¹³C NMR measurement and high performance liquid chromatography (HPLC) analysis of the hydrolysate of the resulting polymer. The stabilization modification of the halogen end groups of the resulting polymer by free-radical chain transfer reaction was attempted under ATRP condition. Isopropyl benzene was employed as the chain transfer agent. Indeed, the modified polymer with carbon-bromine bonds conversion of 40.7% shows enhanced thermal stability. The initial weight loss temperature has been increased from 193 to 243 °C. On the other hand, the atom transfer radical copolymerization of BBPMI with styrene resulted in the formation of hyperbranched polymer.