Kinetics of the Reaction of Abstracting Hydrogen from Ethylene by Hydrogen Atom

Hydrogen abstraction reaction, H C2H4 --H2 C2H2 was studied by using A initio SCF method. Ge-ometries were fully optimized at SCF level and energies were computed at STO-3G basis set for reactants and transition state. Vibrational analysis was performed thereupon. Finally, the rate constant calculations were carried out at different temperatures for all range of reaction temperature according to Eyring's sbwlute reaction rate theory. The calculated activation energy is 12. 68 kcal/mol, lower than observed value (H. S kcal/mol) by 1. 82 kcal/mol only. The agreement of the calculated rate constants with the experiments is satisfactory.     

Simultaneous determination of lead(II) and cadmium(II) at a diacetyldioxime modified carbon paste electrode by differential pulse stripping voltammetry

A simple and effective chemically modified carbon paste electrode (CMCPE) for the simultaneous determination of lead(II) and cadmium(II) was developed in this work. The electrode was prepared by the addition of diacetyldioxime into a carbon paste mixture. Pb²⁺ and Cd²⁺ were preconcentrated on the surface of the modified electrode by complexing with diacetyldioxime and reduced at a negative potential (−1.10 V). Then the reduced products were oxidized by differential pulse stripping. The fact that two stripping peaks appeared on the voltammograms at the potentials of −0.65 V (Cd²⁺) and −0.91 V (Pb²⁺) demonstrates the possibility of simultaneous determination of Pb²⁺ and Cd²⁺. Under the optimized working conditions, calibration graphs were linear in the concentration ranges of 1.0×10⁻⁷-1.5×10⁻⁵ mol l⁻¹ (Pb²⁺) and 2.5×10⁻⁷-2.5×10⁻⁵ mol l⁻¹ (Cd²⁺), respectively. For 5 min preconcentration, detection limits of 1×10⁻⁸ mol l⁻¹ (Pb²⁺) and 4×10⁻⁸ mol l⁻¹ (Cd²⁺) were obtained at the signal noise ratio (SNR) of 3. To evaluate the reproducibility of the newly developed electrode, the measurements of 5×10⁻⁷ mol l⁻¹ Pb²⁺ and Cd²⁺ were parallel carried out for six times at different electrodes and the relative standard deviations were 2.9% (Pb²⁺) and 3.2% (Cd²⁺), respectively. Interferences by some metals were investigated. Only Ni²⁺ and Hg²⁺ apparently affected the peak currents of Pb²⁺ and Cd²⁺. The diacetyldioxime modified carbon paste electrode was applied to the determination of Pb²⁺ and Cd²⁺ in water samples. The results indicate that this electrode is sensitive and effective for the simultaneous determination of Pb²⁺ and Cd²⁺.     

Multilayer poly(vinyl alcohol)-adsorbed coating on poly(dimethylsiloxane) microfluidic chips for biopolymer separation

A poly(dimethylsiloxane) (PDMS) microfluidic chip surface was modified by multilayer-adsorbed and heat-immobilized poly(vinyl alcohol) (PVA) after oxygen plasma treatment. The reflection absorption infrared spectrum (RAIRS) showed that 88% hydrolyzed PVA adsorbed more strongly than 100% hydrolyzed one on the oxygen plasma-pretreated PDMS surface, and they all had little adsorption on original PDMS surface. Repeating the coating procedure three times was found to produce the most robust and effective coating. PVA coating converted the original PDMS surface from a hydrophobic one into a hydrophilic surface, and suppressed electroosmotic flow (EOF) in the range of pH 3-11. More than 1,000,000 plates/m and baseline resolution were obtained for separation of fluorescently labeled basic proteins (lysozyme, ribonuclease B). Fluorescently labeled acidic proteins (bovine serum albumin, beta-lactoglobulin) and fragments of dsDNA phiX174 RF/HaeIII were also separated satisfactorily in the three-layer 88% PVA-coated PDMS microchip. Good separation of basic proteins was obtained for about 70 consecutive runs.     

A Novel 3‐D Heterobimetallic Cyano‐bridged Coordination Polymer Incorporating Ag···Ag Interaction: [Cu(dien)Ag(CN)2]2[Ag2(CN)3][Ag(CN)2]

A three‐dimensional cyano‐bridged copper(II) complex, [Cu(dien)Ag(CN)₂]₂[Ag₂(CN)₃][Ag(CN)₂] ( 1 ) (dien = diethylenetriamine), has been prepared and characterized by X‐ray crystallography. Complex 1 crystallized in the monoclinic space group P2₁/n with a = 6.988(2), b = 17.615(6), c = 12.564(4) Å, β = 90.790(5)°. The crystal consists of cis‐[Cu(dien)]²⁺ units bridged by [Ag(CN)₂]^— to form a zig‐zag chain. The Ag atoms of the free and bridging [Ag(CN)₂]^— link together to form additional infinite zig‐zag chains with short Ag···Ag distances. The presence of Ag···Ag interactions effectively increases the dimensionality from a 1‐D chain to a 3‐D coordination polymer.     

Calculation of ligand-field and Stark sub-levels in laser crystals Nd~(3+):KY(WO_4)_2 and Nd~(3+):KGd(WO_4)_2

The parameters of ligand field of laser crystal Na~(3+):KY(WO_4)_2 and Nd~(3+):KGd(WO_4)_2are obtained by a scheme which involved intermediate coupling and ligand field interaction.Thecalculated Stark-levels are in good agreement with the experimental values.     

Blue myoglobin reconstituted with an iron porphycene shows extremely high oxygen affinity

Myoglobin will be a good scaffold for engineering a function into proteins. To modulate the physiological function of myoglobin, almost all approaches have been demonstrated by site-directed mutagenesis, however, there are few studies which show a significant improvement in the function. In contrast, we focused on the replacement of heme in the protein with an artificial prosthetic group. Recently, we prepared a novel myoglobin reconstituted with an iron porphycene as a structural isomer of mesoheme. The bluish colored reconstituted myoglobin is relatively stable and the deoxymyoglobin reversibly binds ligands. Interestingly, the O2 affinity of the reconstituted myoglobin, 1.1 x 109 M-1, is a significant 1,400-fold higher than that of the native myoglobin. Furthermore, the unfavorable autoxidation kinetics show 7-fold decrease in rate for the reconstituted myoglobin relative to the native myoglobin, indicating the stable oxy-form against autoxidation. The net results come from the slow dissociation of the O2 ligand in the reconstituted myoglobin, koff = 0.11 s-1, because of the formation of strong hydrogen bond between His64 and negatively charged dioxygen. The present study indicates that the replacement of native heme with an artificially created prosthetic group will give us a unique function into a hemoprotein.     

Synthesis, structure, and fluorescence of the novel cadmium(II)-trimesate coordination polymers with different coordination architectures

Three novel complexes, Cd3tma2*13H2O (1), Cd3tma2*dabco*2H2O (2), and Cd3Htma3*8H2O (3) (tma = trimesate), of cadmium(II)-trimesate coordination polymers are obtained from hydrothermal reaction. 1 (C18H32O25Cd3) crystallizes in the monoclinic C2/c space group [a = 18.985(2) A, b = 7.3872(6) A, c = 20.432(2) A, = 97.1660(10), and Z = 4]. 2 (C24H22N2O14Cd3) crystallizes in the monoclinic P2(1)/c space group [a = 10.1323(2) A, b = 19.5669(5) A, c = 13.15880(10) A, = 108.9810(10), and Z = 4]. 3 (C27H28O26Cd3) belongs to the trigonal P31c space group [a = 15.7547(3) A, b = 15.7547(3) A, c = 7.93160(10) A, and Z = 2]. The Cd(II) centers in the three complexes are bridged by tma ligands in the coordination fashion of unidentate, bridging unidentate, bidentate, chelating bis-bidentate, chelating/bridging bis-bidentate, or chelating/bridging bidentate to form the T-shaped molecular bilayer motif for 1, chicken-wire-like motif for 2, and honeycomb-like porous structure for 3, respectively, in which the T-shaped molecular bilayer motif and chicken-wire-like motif are further interlinked in interdigitating or alternating fashion to construct the different coordination architectures. These three complexes exhibit strong fluorescent emission bands at 355 nm (lambda(ex) = 220 nm) for 1, 437 nm (lambda(ex) = 365 nm) for 2, and 353 nm (lambda(ex) = 218 nm) for 3 in the solid state at room temperature.     

Formation of a new crystalline silicate structure by grafting dialkoxysilyl groups on layered octosilicate

Dialkoxydichlorosilanes ((RO)2SiCl2, R = alkyl) react almost completely with interlayer silanol groups in a layered silicate octosilicate to create a new crystalline silicate structure consisting of new five-membered rings arranged regularly on both sides of the silicate layers. The introduction of dialkoxysilyl groups to the interlamellar region of layered silicates with regular reaction sites provides a new methodology for the design and construction of novel crystalline silicate frameworks by a soft chemical route.     

Decarbopalladation of pi-allylpalladium intermediates formed from palladium-catalyzed arylations of 3-allen-1-ols

[reaction: see text] Unusual palladium-catalyzed arylative fragmentations of acyclic 3-allen-1-ols were observed. Oxidative addition of Pd(0) to aryl halides would form the arylpalladium halides, which added to the central carbon of allenes via carbopalladation to form the pi-allylpalladium intermediates. The pi-allylpalladium intermediates would be reductively eliminated via carbon-carbon cleavage to give the arylated dienes and the alpha-hydroxyalkylpalladium intermediates, which were further reductively eliminated to the corresponding aldehydes.     

Simultaneous determination of polycarboxylic acids by capillary electrophoresis with a copper electrode

The simultaneous determination of polycarboxylic acids including oxalic acid, citric acid, malonic acid, malic acid, tartaric acid, aspartic acid and glutamic acid was achieved by capillary electrophoresis with a copper disk electrode (d = 200 microm). In the system. 0.2 mmol/l cetylpridinium bromide (CPB) was used as an electroosmotic flow (EOF) modifier to reverse the direction of EOF. The effects of the solution pH and CPB concentration on separation were evaluated to achieve the optimum separation conditions. At the working potential of +0.14 V (vs. saturated calomel electrode), the calibration curves for all polycarboxylic acids studied were linear with 2 approximately 3-orders of magnitude and all the detection limits (S/N = 3) were below 15 fmol except malonic acid. Furthermore, the oxalic and citric acids in urine were successfully separated and determined with high sensitivity.