Photoresponding ionic complex containing azobenzene chromophore for use in birefringent flm简

A novel photoresponding ionic complex （PANDAZO） was prepared by the ionic self-assembly （1SA） of sodium polyacrylate （PANa） and azobenzene chromophores （NDAZO）. The ionic complex forms an interdigitated lamellar structure with full overlap of the side chains. The optical anisotropy was investigated by using a polarization pulse laser （355 nm）. Furthermore, a high photoinduced birefringence （An = 0.365） was measured by using a continuous 488 nm laser as the pump light.     

Synergistic effect of W and P on ZSM-5 and its catalytic performance in the cracking of heavy oil

In order to develop the conversion of heavy oil with a high yield of propylene in the catalytic cracking process, ZSM-5 zeolite was modified by tungsten and phosphorus, which was proved to be an effective method. Characterization results show that the improvement of catalytic performance could be correlated to the interaction of phosphorus and tungsten species on ZSM-5. P inhibited the aggregation of tungsten species on ZSM-5 and was conductive to convert the tungsten species with octahedral coordination into tetrahedral coordination. And this ultimately led to that more acid sites were reserved after hydrothermal treatment in the tungsten and phosphorus co-modified ZSM-5 catalyst. Phosphorus species played an important role to restrain the dehydrogenation activity of tungsten. In addition, a model reflecting the interaction between tungsten species and ZSM-5 framework was proposed.     

黄油中8种类固醇激素的液相色谱/串联质谱检测

建立了黄油中雌酮、α-雌二醇、β-雌二醇、雌三醇、睾酮、表睾酮、孕酮和丙酸睾酮8种类固醇激素的凝胶渗透色谱(GPC)-液相色谱/串联质谱(LC-MS/MS)检测方法。样品用乙酸乙酯-环己烷(1∶1,V/V)提取,提取液经GPC柱净化除脂,GPC浓缩液采用C18色谱柱(100 mm×2.0 mm i.d.,3.0μm)分离,以乙腈和水为流动相进行梯度洗脱,电喷雾电离多反应监测模式进行定性和定量分析。8种类固醇激素以基质匹配外标法定量,药物在1.0~20.0μg/kg线性范围内相关系数(r)均大于0.999;方法检出限(S/N=3)为0.04~0.30μg/kg,定量限LOQs(S/N=10)为1.0μg/kg;添加水平为1.0,2.0,4.0μg/kg时,回收率范围在64.1%~110%之间;相对标准偏差(RSD)小于11%。结果表明,本方法准确、可靠,满足黄油中8种类固醇激素的检测分析要求。     

NH3选择性还原NOx技术在重型柴油车尾气净化中的应用

基于实验室对柴油车用V₂O₅-WO₃/TiO₂催化剂配方以及涂覆成型技术的大量研究,设计了一条产量为6000只/月的NH₃选择性催化还原NO_x （NH₃-SCR）催化剂中试生产线,并对生产的催化剂产品进行了发动机台架测试. 结果表明,实验室制备的V₂O₅-WO₃/TiO₂粉体催化剂和生产线产品,在空速为50000 h^-1和200-450 ℃条件下NO_x转化率均可达80%以上;采用大尺寸堇青石载体涂覆后制备的V₂O₅-WO₃/TiO₂整体催化剂经实验室小样测试,在空速为10000-30000 h^-1和250-450 ℃条件下NO_x转化率也为80%以上. 发动机台架测试结果表明,该催化剂产品可使重型柴油机NO_x排放达到国IV标准中欧洲稳态循环（ESC）和欧洲瞬态循环（ETC）排放限值的要求. 该生产线经适当调整后也可用于生产非钒基NH₃-SCR整体催化剂,以满足未来钒基NH₃-SCR催化剂更新换代的需求.     

Tumor Microenvironment Stimuli-Responsive Fluorescence Imaging and Synergistic Cancer Therapy by Carbon-Dot–Cu2+ Nanoassemblies

A method is developed to fabricate tumor microenvironment (TME) stimuli-responsive nanoplatform for fluorescence (FL) imaging and synergistic cancer therapy via assembling photosensitizer (chlorine e6, Ce6) modified carbon dots (CDs-Ce6) and Cu²⁺. The as-obtained nanoassemblies (named Cu/CC nanoparticles, NPs) exhibit quenched FL and photosensitization due to the aggregation of CDs-Ce6. Their FL imaging and photodynamic therapy (PDT) functions are recovered efficiently once they entering tumor sites by the stimulation of TME. Introducing of Cu²⁺ not only provides extra chemodynamic therapy (CDT) function through reaction with hydrogen peroxide (H₂O₂), but also depletes GSH in tumors by a redox reaction, thus amplifying the intracellular oxidative stress and enhancing the efficacy of reactive oxygen species (ROS) based therapy. Cu/CC NPs can act as a FL imaging guided trimodal synergistic cancer treatment agent by photothermal therapy (PTT), PDT, and thermally amplified CDT.     

Three-dimensional Octameric Assembly of Icosahedral M13 Units in [Au8Ag57(Dppp)4(C6H11S)32Cl2]Cl and its [Au8Ag55(Dppp)4(C6H11S)34][BPh4]2 Derivative

The high-dimensional (that is, three-dimensional (3D)) assembly of nanomaterials is an effective means of improving their properties; however, achieving this assembly at the atomic level remains challenging. Herein, we obtained a novel nanocluster, [Au₈Ag₅₇(Dppp)₄(C₆H₁₁S)₃₂C_l2]Cl (Dppp=1,3-bis(diphenylphosphino)propane) showing a 3D octameric assembly mode involving the kernel penetration of eight complete icosahedral Au@Ag₁₀Au₂ units for the first time. The atomically precise structure was determined by single-crystal X-ray diffraction, and further confirmed by thermogravimetric analysis, X-ray photoelectron spectroscopy, and electrospray ionization mass spectrometry measurements. Furthermore, ligand-induced transformation prompted the conversion of [Au₈Ag₅₇(Dppp)₄(C₆H₁₁S)₃₂Cl₂]Cl, with complete octameric fusion into [Au₈Ag₅₅(Dppp)₄(C₆H₁₁S)₃₄][BPh₄]₂, with incomplete octameric fusion. These observations will hopefully facilitate further research on the assembly of M₁₃ nanobuilding blocks.     

多功能Fe3O4@SiO2 Janus颗粒

采用溶剂热法和溶胶-凝胶法制备了顺磁性Fe₃O₄@SiO₂颗粒,以Pickering乳液界面保护法实现颗粒表面分区获得Fe₃O₄@SiO₂ Janus颗粒,进一步选区复合生长Pt或Ag纳米颗粒制备Fe₃O₄@SiO₂-Pt和Fe₃O₄@SiO₂-Ag Janus颗粒.Fe₃O₄@SiO₂-Pt Janus颗粒的Pt一侧进行催化过氧化氢的反应,具有自驱动功能.因其顺磁性和两亲性,Fe₃O₄@SiO₂-Ag Janus颗粒能够作为磁响应颗粒乳化剂稳定油水乳液,并将Ag的催化功能引入界面.     

有机电极材料固定化策略

有机电极材料因其理论比容量高、低成本、环境友好以及分子结构可设计性强等特点,有望成为下一代可持续和多功能能量储存设备的有效电极材料。然而,根据“相似相溶”原理,该类材料极易溶解在有机电解液中,导致电池容量衰减快、循环稳定性和倍率性能也较差。目前已有许多研究致力于通过“固定化”过程解决有机电极材料的溶解问题。本综述针对有机电极材料的固定化策略展开评述,介绍了有机电极材料的固定化机理,以及各种固定化策略在不同种类有机电极材料中所起的作用,指出了有机电极材料面临的挑战,并对未来的研究和改进方向进行展望。     

De Novo Construction of Catenanes with Dissymmetric Cages by Space‐Discriminative Post‐Assembly Modification

Considerable efforts have been made to increase the topological complexity of mechanically interlocked molecules over the years. Three‐dimensional catenated structures composed of two or several (usually symmetrical) cages are one representative example. However, owing to the lack of an efficient universal synthetic strategy, interlocked structures made up of dissymmetric cages are relatively rare. Since the space volume of the inner cavity of an interlocked structure is smaller than that outside it, we developed a novel synthetic approach with the voluminous reductant NaBH(OAc)₃ that discriminates this space difference, and therefore selectively reduces the outer surface of a catenated dimer composed of two symmetric cages, thus yielding the corresponding catenane with dissymmetric cages. Insight into the template effect that facilitates the catenation of cages was provided by computational and experimental techniques.     

Three‐dimensional Octameric Assembly of Icosahedral M13 Units in [Au8Ag57(Dppp)4(C6H11S)32Cl2]Cl and its [Au8Ag55(Dppp)4(C6H11S)34][BPh4]2 Derivative

The high‐dimensional (that is, three‐dimensional (3D)) assembly of nanomaterials is an effective means of improving their properties; however, achieving this assembly at the atomic level remains challenging. Herein, we obtained a novel nanocluster, [Au₈Ag₅₇(Dppp)₄(C₆H₁₁S)₃₂C_l2]Cl (Dppp=1,3‐bis(diphenylphosphino)propane) showing a 3D octameric assembly mode involving the kernel penetration of eight complete icosahedral Au@Ag₁₀Au₂ units for the first time. The atomically precise structure was determined by single‐crystal X‐ray diffraction, and further confirmed by thermogravimetric analysis, X‐ray photoelectron spectroscopy, and electrospray ionization mass spectrometry measurements. Furthermore, ligand‐induced transformation prompted the conversion of [Au₈Ag₅₇(Dppp)₄(C₆H₁₁S)₃₂Cl₂]Cl, with complete octameric fusion into [Au₈Ag₅₅(Dppp)₄(C₆H₁₁S)₃₄][BPh₄]₂, with incomplete octameric fusion. These observations will hopefully facilitate further research on the assembly of M₁₃ nanobuilding blocks.