基于(火积)理论的“+”形高导热构形通道实验研究

基于构形理论和■理论,对"+"形高导热通道的方形构造体开展导热实验研究,并对不同优化目标和不同高导热通道布置形式下的构造体导热性能进行比较.结果表明:对于"+"形高导热通道的方形构造体,实验和数值计算所得到的构造体最高温度点均位于"+"形高导热通道两分支之间,实验和数值计算所得到的构造体平均温差和■耗散率的误差均在可接受范围内,这从定性和定量的角度证明了导热构形优化结果的正确性.与"H"形高导热通道的方形构造体相比,构造体内高导热通道采用一级"+"形布置使得其导热■耗散率得到降低.■耗散率最小的一级"+"形高导热通道构造体最优构形与最大温差最小的构造体最优构形相比,前者的导热■耗散率降低了5.98%,但最大温差提高了3.57%.最大温差最小目标有助于提高构造体的热安全性,■耗散率最小目标有助于提高构造体的整体导热性能.在保证热安全性能的前提下,实际微电子器件设计中可采用■耗散率最小的构造体最优构形以提高其整体导热性能.     

发展在XLPE电缆绝缘内外侧的电树枝

以XLPE高压电力电缆内外侧绝缘中的电树枝特性为研究对象，通过分析电树枝引发与生长的统计实验规律和采用扫描电子显微镜分析发现，由于不同结晶状态的影响，电缆绝缘内外侧的电树枝特性存在很大的差异.引发于绝缘内侧电树枝引发时间短、生长速度快、电树枝形状具有多样性；起始于绝缘外侧的电树枝不仅引发时间长、生长速度极慢，而且电树枝形状(结构)比较单一.并对这两个位置电树枝的引发和生长机理进行了探讨. 关键词： 电树枝 结晶状态 统计规律 内侧和外侧绝缘层     

Catalyst-controlled diastereoselective ring-opening formal [3+2]-cycloadditions of arylvinyl oxirane 2,2-diesters with cyclic N-sulfonyl imines

A diastereoselectivity-controllable formal [3+2]-cycloaddition of arylvinyl oxirane 2,2-diesters with cyclic N-sulfonyl imines is developed, affording the corresponding tricyclic oxazolidine derivatives in moderate to excellent yields with excellent diastereoselectivities in the presence of palladium(0) or scandium(III) triflate. This protocol allows selective synthesis of diastereomers of tricyclic oxazolidine derivatives under switchable and mild conditions. Further transformations of the obtained products were conducted by removing ester groups and arylvinyl moieties.     

有阻尼的二阶脉冲无穷时滞泛函微分方程解的存在性

应用Kuratowski非紧性测度和分段估计方法,研究Banach空间中有阻尼的二阶脉冲无穷时滞泛函微分方程mild解的存在性和正则性.脉冲项的紧性条件,先验估计和非紧性测度估计的限制条件没有被使用,所得结果不同于许多已知的结果.作为应用,举了两个例子说明该文的结果.     

Rogue wave solutions for a generalized nonautonomous nonlinear equation in a nonlinear inhomogeneous fiber

In this paper, we investigate a generalized nonautonomous nonlinear equation which describes the ultrashort optical pulse propagating in a nonlinear inhomogeneous fiber. By virtue of the generalized Darboux transformation, the first- and second-order rogue-wave solutions for the generalized nonautonomous nonlinear equation are obtained, under some variable–coefficient constraints. Properties of the first- and second-order rogue waves are graphically presented and analyzed: When the coefficients are all chosen as the constants, we can observe the some functions, the shapes of wave crests and troughs for the first- and second-order rogue waves change. Oscillating behaviors of the first- and second-order rogue waves are observed when the coefficients are the trigonometric functions.     

Rapid determination of α‐tocopherol in cereal grains using dispersive liquid–liquid microextraction followed by HPLC

The traditional for the determination of α‐tocopherol in cereal grains includes saponification of a sample followed by liquid–liquid extraction, and it is time‐ and solvent consuming. In this study, a dispersive liquid–liquid microextraction (DLLME) method was developed to extract α‐tocopherol in situ from the saponified grain sample solution. The DLLME experimental parameters including the type and volume of extractants, the volume of dispersers, the addition of salt and the extraction/centrifuging time were examined and optimized. The recommended analytical procedure showed excellent precision (relative SDs of the α‐tocopherol amount of 3.1% over intraday and 7.2% over interday), high sensitivity (the detection limit of 1.9 ng/mL), and strong recovery values (88.9–102.5%). In addition, statistical analyses showed no significant difference between the detected amounts of α‐tocopherol found by the standardized method and this new procedure. The method was successfully applied to determining the amounts and distribution of α‐tocopherol in 14 cereal grain samples.     

Coagulation behaviors and in-situ flocs characteristics of composite coagulants in cyanide-containing wastewater: Role of cationic polyelectrolyte

In this paper,composite coagulants(PFS,PFSC05,PFSC1 and PFSC5),prepared by mixing polyferric sulfate(PFS)and cationic polyelectrolyte(CP)coagulants with different weight percent(Wp)of CP(Wp=0%,0.5%,1%and 5%,respectively),were adopted to treat cyanide-containing wastewater.PFSC5 exhibited superior coagulation performances at optimal conditions:the removal of total cyanide(TCN)and chemical oxygen demand(COD)was 95%–97%and 50%–55%,respectively.The effects of CP on the properties and structure of flocs were investigated by laser diffraction instrument and small-angle laser light scattering(SALLS),respectively.The results show that the flocs of PFSC5 have higher growth rate,higher strength factor and lower recovery factor than other flocs.They are also much denser and more uniform owing to the higher fractal dimension(Df)and less microflocs(10–100 m).Furthermore,the dense structure of the PFSC5 flocs can be restored after shear and is more resistant to hydraulic conditions.Particularly,detailed morphology evolution of the flocs was in-situ detected by on-line particle imaging.Due to strong ionic strength in wastewater,the CP in PFSC5 plays a significant role of adsorption,while the main mechanism of CP is electrostatic patch aggregation during the PFSC05 systems.     

Novel Route to Functionalized Indans via Formal [3 + 2] Cycloadditions of 1-Benzylbenzotriazoles with Alkenes

α-Functionalized 1-benzylbenzotriazoles (3, 4 and 12), derived from the lithiation of 1-(2,3-dimethoxybenzyl)benzotriazole 2 followed by reactions with electrophiles, or from the condensation of benzyl alcohol 11 with benzotriazole, undergo formal [3 + 2] cycloadditions with styrenes upon treatment with ZnBr₂ to give functionalized indans (9, 10, 13 and 14).     

Direct Blue 71 staining as a destaining‐free alternative loading control method for Western blotting

In Western blotting, a suitable loading control is indispensable for correcting errors in the total amount of loaded protein. Immunodetection of housekeeping proteins and total protein staining have traditionally been used as loading control methods. Direct Blue 71 (DB71) staining—a novel, sensitive, dye‐binding staining method compatible with immunodetection—may offer advantages over these traditional loading control methods. Three common neuroscientific samples (human plasma, human oligodendrocytes, and rat brain) were employed to assess DB71 staining as a loading control method for Western blotting. DB71, CBB, one traditional housekeeping protein, and one protein of interest were comparatively assessed for reliability and repeatability and linear dynamic range over 2.5–40 μg of protein loaded. DB71's effect on the reliability and repeatability and linear dynamic range of immunoreaction were also assessed. Across all three sample types, DB71 was either equivalent or superior to CBB and housekeeping protein‐based methods in terms of reliability and repeatability and linear dynamic range. Across all three sample types, DB71 staining did not impair the reliability and repeatability or linear dynamic range of immunoreaction. Our results demonstrate that the DB71 staining can be used as a destaining‐free alternative loading control method for Western blotting.