On a micro‐macro model for polymeric fluids near equilibrium

In this paper, we study a micro‐macro model for polymeric fluid. The system involves coupling between the macroscopic momentum equation and a microscopic evolution equation describing the combined effects of the microscopic potential and thermofluctuation. We employ an energetic variation procedure to explore the relation between the macroscopic transport of the particles and the induced elastic stress due to the microscopic structure. For the initial data not far from the equilibrium, we prove the global existence and uniqueness of classical solutions to the system. © 2006 Wiley Periodicals, Inc.     

EAST װ�ñ�Ե����ģϸ˿��ȵĸ���CCD�ɼ������ϵͳ���

The high speed CCD visible-light camera system has been installed to detect the dynamic characteristics of ELMs filaments on EAST tokamak. In order to convert the CCD video imaging coordinates into real space coordinates, the CCD system has calibrated using Tsai’s two-stage calibration technique. A raised spike in the grayscale profile, drawn by selecting the grayscale value of the image in the vertical direction of the ELMs filament in the CCD image, represents an ELMs filament structure whose positional coordinates are determined by the apex of the spike. The Sobel edge detection operator was used to examine the edge profile of the filament to obtain the width of the filament. By analyzing the characteristics of the filament width of the ELMs, it is found that the width of ELMs filaments continuously decreases outward from the outermost magnetic surface. This indicates that the filaments continue to dissipate energy and particles as they propagate outward. The width of filaments of Type-I ELMs is greater than that of Type-III ELMs.     

A Novel Analytical Approach for Multi-Layer Diaphragm-Based Optical Microelectromechanical-System Pressure Sensors

An optical microelectromechanical-system （MEMS） pressure sensor based on multi-layer circular diaphragm is described and analysed by using the proposed novel analytical approach and the traditional transfer matrix method. The analytical expressions of the deflection of multi-layer diaphragm and absolute optical reflectance are derived respectively. The influence of residual stress on the deflection of diaphragm is also analysed. Simulation results given by the finite element method are consistent with the ones which are analysed by using the analytical approach. The analytical approach will be helpful to design and fabricate the optical MEMS pressure sensors with multi-layer diaphragm based on Fabry-Perot interferometry.     

Mode equation and its solution for dielectric waveguide with parabolic cross-section

The mode equation for the dielectric waveguide with parabolic cross-section is derived using both the effective index method and WKB theory, and the expression of the mode propagation constant or effective index is solved directly from this mode equation, so that the mode-propagation properties of this kind of waveguide can be analysed conveniently with comparative accuracy.     

Microstructure array on Si and SiOx generated by micro-contact printing, wet chemical etching and reactive ion etching

A method, combining micro-contact printing (μCP), wet chemical etching and reactive ion etching (RIE), is reported to fabricate microstructures on Si and SiOx. Positive and negative structures were generated based on different stamps used for μCP. The reproducibility of the obtained microstructures shows the methodology reported herein could be useful in Micro-Electro-Mechanical Systems (MEMS), optical and biological sensing applications.     

激光谐振腔内光学元件的热光效应

本文分析了多模激光束加热内腔元件所引起的温度场分布及热聚焦效应。计算得到的LiNbO₃寻常光和非常光的输入功率-输出功率曲线与Konvisar等人的实验结果符合,修正了他们计算的非常光曲线。在实验上,也观测了LiNbO₃的内腔热光滞后现象,并测量了内腔热光聚焦效应。 关键词：     

Eu3+离子在微晶玻璃研究中的探针作用

制备出单掺Eu3+离子的氟氧化物玻璃陶瓷系列样品,利用Eu3+离子作为荧光探针,通过热处理前后Eu3+离子发射光谱中电偶极子跃迁与磁偶极子跃迁强度比值的变化表征在玻璃材料中微晶是否形成,分析了Eu3+离子荧光发射谱中电偶极子跃迁与晶体场对称性的关系,进一步表征了稀土离子所处微晶晶格场的变化.     

亚甲基蓝褪色光度法测定肝素

用紫外-可见光谱法研究肝素(Hep)对亚甲基蓝(MB)的褪色反应,在pH3.0的BrittonRobinson缓冲溶液中,肝素与亚甲基蓝形成离子缔合物时,染料发生明显的褪色,体系吸光度的降低与肝素钠浓度成正比.建立了一种简单、灵敏、选择性高的肝素测定方法.本法在0-4.0μg/mL范围内呈现良好的线性关系(r=0.9978),回收率范围为98.8%-101.9%.用于肝素钠注射液的分析,结果令人满意.     

测量冷原子温度的理论与近似拟合公式的误差分析

对短程飞行时间法(tim e-of-flight,TOF)中推算冷原子温度的理论拟合公式与近似拟合公式进行了误差分析与比较。研究表明:对于使用短程飞行吸收光谱信号推测冷原子团温度,当探测光光斑半径与冷原子团高斯半径之比k小于0.2时,理论拟合公式和近似拟合公式能很好的相符,随着探测光光斑半径与冷原子团高斯半径比值的逐渐增大,用近似拟合公式所得TOF吸收信号与用理论拟合公式所得TOF吸收信号的误差也将逐渐增大,当比值为0.5时,用近似拟合公式所得TOF吸收信号的误差将增大到20%。     

Viscometric properties of dilute polystyrene/dioctyl phthalate solutions

We report viscometric data collected in a Couette rheometry on dilute, single‐solvent polystyrene (PS)/dioctyl phthalate (DOP) solutions over a variety of polymer molecular weights (5.5 × 10⁵ ≤ M_w ≤ 3.0 × 10⁶ Da) and system temperatures (288 K ≤ T ≤ 318 K). In view of the essential viscometric features, the current data may be classified into three categories: The first concerns all the investigated solutions at low shear rates, where the solution properties are found to agree excellently with the Zimm model predictions. The second includes all sample solutions, except for high‐molecular‐weight PS samples (M_w ≥ 2.0 × 10⁶ Da), where excellent time–temperature superposition is observed for the steady‐state polymer viscosity at constant polymer molecular weights. No similar superposition applies at a constant temperature but varied polymer molecular weights, however. The third appears to be characteristic of dilute high‐molecular‐weight polymer solutions, for which the effects of temperature on the viscosity curve are further complicated at high shear rates. The implications concerning the relative importance of hydrodynamic interactions, segmental interactions, and chain extensibility with increasing polymer molecular weight, system temperature, and shear rate are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 787–794, 2006