Speciation of Cu(II) with a flow-through permeation liquid membrane: discrimination between free copper, labile and inert Cu(II) complexes, under natural water conditions

Metal toxicity is not related to the total metal ion concentration, but to those of some specific Cu(II) species. The Permeation Liquid Membrane technique is based on the carrier-mediated transport of the test metal across a hydrophobic membrane and enables discrimination between various trace metal species in solution. The present work shows how the labile and inert Cu(II) complexes can be determined selectively, by varying the flow-rate of the test solution, in a flow-through cell. A mathematical model of metal flux through the PLM, based on diffusion-limited transport under steady-state conditions, is described. The model and the performance of the technique were studied in well-defined synthetic solutions containing simple organic hydrophilic ligands forming either inert (nitrilotriacetic acid), or labile complexes with Cu(II) (tartaric acid, malonic acid). The results were compared with theoretical predictions of thermodynamic species distribution in solution. Uncertainties on stability constants for copper speciation calculation were taken into account. The detection limits of the device are discussed. This work demonstrates that the flow-through cell is a reliable tool for copper speciation measurements in natural waters.     

Ultraviolet-B radiation effects on the structure and function of lower trophic levels of the marine planktonic food web

The impact of UV-B radiation (UVBR; 280-320 nm) on lower levels of a natural plankton assemblage (bacteria, phytoplankton and microzooplankton) from the St. Lawrence Estuary was studied during 9 days using several immersed outdoor mesocosms. Two exposure treatments were used in triplicate mesocosms: natural UVBR (N treatment, considered as the control treatment) and lamp-enhanced UVBR (H treatment, simulating 60% depletion of the ozone layer). A phytoplankton bloom developed after day 3, but no significant differences were found between treatments during the entire experiment for phytoplankton biomass (chlorophyll a and cell carbon) nor for phytoplankton cell abundances from flow cytometry and optical microscopy of three phytoplankton size classes (picoplankton, nanoplankton and microplankton). In contrast, bacterial abundances showed significantly higher values in the H treatment, attributed to a decrease in predation pressure due to a dramatic reduction in ciliate biomass (approximately 70-80%) in the H treatment relative to the N treatment. The most abundant ciliate species were Strombidinium sp., Prorodon ovum and Tintinnopsis sp.; all showed significantly lower abundances under the H treatment. P. ovum was the less-affected species (50% reduction in the H treatment compared with that of the N control), contrasting with approximately 90% for the other ones. Total specific phytoplanktonic and bacterial production were not affected by enhanced UVBR. However, both the ratio of primary to bacterial biomass and production decreased markedly under the H treatment. In contrast, the ratio of phytoplankton to bacterial plus ciliate carbon biomass showed an opposite trend than the previous results, with higher values in the H treatment at the end of the experiment. These results are explained by the changes in the ciliate biomass and suggest that UVBR can alter the structure of the lower levels of the planktonic community by selectively affecting key species. On the other hand, linearity between particulate organic carbon (POC) and estimated planktonic carbon was lost during the postbloom period in both treatments. On the basis of previous studies, our results can be attributed to the aggregation of carbon released by cells to the water column in the form of transparent exopolymer particles (TEPs) under nutrient limiting conditions. Unexpectedly, POC during such a period was higher in the H treatment than in controls. We hypothesize a decrease in the ingestion of TEPs by ciliates, in coincidence with increased DOC release by phytoplankton cells under enhanced UVBR. The consequences of such results for the carbon cycle in the ocean are discussed.     

Inorganic reinforcement in PET/silica electrospun nanofibers

PET/silica nanocomposite fibers of high quality were fabricated from electrospinning by choosing appropriate surface modification of inorganic fillers, solution properties, and processing conditions. The existence of an immobilized layer around silane-modified silica particles in PET fibers was verified by Fourier transform infrared spectroscopy, the results of which confirm previous thermal analysis studies. The influence of silica particles on the crystal growth during isothermal crystallization as well as the phase structure of the crystallized nanocomposite fibers were examined using differential scanning calorimetry. The PET crystallization rate increases significantly with increasing silica content, which indicates that the silica nanoparticles act as an efficient nucleating agent to facilitate PET crystallization. Using Avrami analysis, for the first time, preferred 1-D crystal growth was confirmed for geometrically confined nanocomposite fibers. Addition of silica particles makes the crystal growth more likely to occur in a 1-D manner.     

Crystallization and melting of cold-crystallized poly(phenylene sulfide)

In this study, we report the melting behavior of poly(phenylene sulfide), PPS, which has been cold-crystallized from the rubbery amorphous state. We find that the crystallization kinetics are faster for cold-crystallized PPS than for melt-crystallized material, due to formation during quenching of a short-range ordered, but noncrystalline, structure. We observe that the endothermic response of cold-crystallized PPS at a large undercooling consists of a low temperature endotherm, followed by an exothermic region, and by the main higher melting endotherm. The lower melting peak temperature of cold-crystallized PPS increases as the crystallization temperature increases, but the main upper melting peak temperature remains almost the same. The size of the exothermic region is strongly related to the degree of undercooling, and must be taken into account in order properly to determine the degree of crystallinity of the material prior to the scan. When the crystallization time is varied, we see a systematic decrease in the size of the main endotherm, and an increase in size of the lower melting endotherm. This suggests that a portion of the main endothermic response is due to reorganization during the scan. Annealing will not only increase the degree of crystallinity but also improve the crystal perfection; therefore the ability of an annealed sample to reorganize decreases as the annealing time increases. However, an additional third melting peak is seen when a cold-crystallized sample is annealed at high temperature for a sufficiently long residence time. The existence of the third melting peak suggests that more than one kind of distribution of crystal perfection may occur when PPS has been cold-crystallized and subsequently annealed.     

Distance distributions recovered from steady-state fluorescence measurements on thirteen donor-acceptor pairs with different Förster distances

The end-to-end distance distribution of a flexible molecule was recovered from steady-state fluorescence energy transfer measurements using the method suggested by Cantor and Pechukas (Proc. Natl. Acad. Sci. USA 68, 2099–2101, 1971). In this method, the Förster distance (R ₀) is varied by attaching different donor-acceptor (D-A) pairs to the flexible linker of interest. Distance distributions are then recovered from energy transfer efficiency measurements on the set of D-A pairs with differentR ₀ values. Thirteen D-A pair compounds were synthesized withR ₀ values ranging from 6 to 32 Å. Each compound contained a tryptamine donor linked by an alkyl chain (10 carbons) to 1 of 13 acceptors. Using these compounds, we have experimentally confirmed the Cantor and Pechukas method for recovering distance distributions. The measured transfer efficiencies, as a function ofR ₀, were fit to the transfer efficiencies predicted for both Gaussian and skewed Gaussian distance distributions. The data support the existence of a skewed Gaussian distribution, and we believe that this is the first experimental observation of an asymmetric distribution for a flexible molecule using fluorescence resonance energy transfer measurements. Finally, the experimentally recovered distance distribution was found to be in good agreement with the distribution predicted from the rotational isomeric state model of Flory (Statistical Mechanics of Chain Molecules, John Wiley & Sons, New York, 1969, Chaps. 1, 3, and 5) but not with the predicted distribution for a freely rotating or freely jointed chain.     

A Convenient and Reproducible Procedure for the Transfer Hydrogenation of 2-Benzyloxy-Tetronic Acids Based on 〈Preactivation〉 of the Catalyst

Access to 2-hydroxy tetronic acids 3 via selective heterogeneous transfer hydrogenation of benzyl ether 2 based on preactivation of the catalyst.