Factorial analysis of the trihalomethanes formation in water disinfection using chlorine

The factors that affect trihalomethane (THM) (chloroform, bromodichloromethane, chlorodibromomethane and bromoform) formation from the chlorination of aqueous solutions of hydrophobic fulvic acids (FA) were investigated in a prototype laboratorial simulation using factorial analysis. This strategy involved a fractional factorial design (16 plus 5 center experiments) of five factors (fulvic acids concentration, chlorine dose, temperature, pH and bromide concentration) and a Box Behnken design (12 plus 3 center experiments) for the detailed analysis of three factors (FA concentration, chlorine dose and temperature). The concentration of THM was determined by headspace analysis by GC-ECD. The most significant factors that affect the four THM productions were the following: chloroform-FA concentration and temperature; bromodichloromethane-FA concentration and chlorine dose; chlorodibromomethane-chlorine dose; and, bromoform-chlorine dose and bromide concentration. Moreover, linear models were obtained for the four THM concentrations in the disinfection solution as function of the FA concentration, chlorine dose and temperature, and it was observed that the complexity of the models (number of significant factors and interactions) increased with increasing bromine atoms in the THM. Also, this study shows that reducing the FA concentration the relative amount of bromated THM increases.     

Fibre selection based on an overall analytical feature comparison for the solid-phase microextraction of trihalomethanes from drinking water

This paper describes the optimization of solid-phase microextraction (SPME) conditions for three different fibres (Carboxen-polydimethylsiloxane (CAR-PDMS), divinylbenzene-Carboxen-polydimethylsiloxane (DVB-CAR-PDMS) and polydimethylsiloxane-divinylbenzene (PDMS-DVB)) used to determine trihalomethanes (THMs) in water by headspace solid-phase microextraction and gas chromatography (HS-SPME-GC). The influence of temperature and salting-out effect was examined using a central composite design for each fibre. Extraction time was studied separately at the optimum values found for temperature and sodium chloride concentration (40 degrees C and 0.36g mL-1). The HS-SPME-GC-MS method for each fibre was characterised in terms of linearity, detection (LOD) and quantification (LOQ) limits and repeatability. The fibre PDMS-DVB was selected as it provided a broader linear range, better repeatability and lower detection and quantification limits than the others, particularly CAR-PDMS fibre. The accuracy of the proposed method using the PDMS-DVB fibre was checked by a recovery study in both ultrapure and tap water. A blank analysis study showed the absence of memory effects for this fibre. The reproducibility (expressed as a percentage of relative standard deviation) was 6-11% and the detection limits were between 0.078 and 0.52microgL-1 for bromoform and chloroform, respectively. Finally, the method was applied to determine THM concentration in two drinking water samples.     

Chemo‐ and Regioselective Palladium‐Catalyzed Oxycyclization Reactions of Allendiols: Preparation of Five‐, Six‐, and Eight‐Membered Cycles

Positive discrimination : Chemo‐ and regioselective palladium‐catalyzed cycloetherification of allendiols, namely β,γ‐ and γ,δ‐allendiols, may occur by judicious choice of palladium‐catalyzed conditions owing to their potential ability to discriminate between both nucleophilic sites (see scheme).

     

Conformational flexibility of a synthetic glycosylaminoglycan bound to a fibroblast growth factor. FGF-1 recognizes both the (1)C(4) and (2)S(O) conformations of a bioactive heparin-like hexasaccharide

The first direct NMR determination of the conformation of a conformationally flexible heparin-like hexasaccharide bound to a key receptor, FGF-1, is described. The determination has been based on the use of a 13C-labeled protein and a regular 12C sugar. FGF-1 recognizes several conformations of the iduronic moieties of the hexasaccharide. Therefore, this case is different than that described for the controversial recognition of heparin-like saccharides by AT-III, which seems to recognize just one conformation of the iduronic acid residues.     

Study of the capillary electrophoresis profile of intact α-1-acid glycoprotein isoforms as a biomarker of atherothrombosis

α-1-Acid glycoprotein (AGP) is a serum glycoprotein that presents several isoforms. Changes in the isoforms of AGP have been related to different pathological states including cardiovascular diseases (CVDs) such as acute myocardial infarction. However, to our knowledge, the role of variations of AGP isoforms as a potential biomarker of atherothrombosis has not been addressed. In this work, a preliminary study about differences in the capillary zone electrophoresis (CZE) profile of intact (non-hydrolyzed) AGP isoforms between healthy individuals and patients with atherothrombosis, specifically abdominal aortic aneurysm (AAA) and carotid atherosclerosis (CTA), has been performed. Biological samples (plasmas and sera) were analyzed by CZE after immunoaffinity chromatography purification. Up to 13 peaks corresponding to groups of isoforms of intact AGP from plasma samples were detected by CZE-UV. Electrophoretic profiles were aligned, peaks assigned, and linear discriminant analysis (LDA) of percentage of the corrected areas of AGP peaks was employed to discriminate and classify the CZE profiles of AGP samples. LDA enabled to accomplish 92.9% of correct classification of the AGP samples when the three groups of samples were considered. Besides, the LDA model showed high predictive power in the groups healthy vs. sick, healthy vs. AAA, and healthy vs. CTA. The described method was a successful approach to study the potential of AGP isoforms profile as a biomarker of atherothrombosis. To the best of our knowledge this has been the first time that a possible role of the CZE profile of intact AGP isoforms as a biomarker of vascular diseases has been demonstrated.     

Ultrasensitive bioelectronic devices based on conducting polymers for electrophysiology studies

Conducting polymer electrodes based on poly(3,4-ethylenedioxythiophene doped with poly(styrenesulfonate) (PEDOT:PSS) are evaluated as transducers to record extracellular signals in cell populations. The performance of the polymer electrode is compared with a gold electrode. A small-signal impedance analysis shows that in the presence of an electrolyte, the polymer electrode establishes for frequencies below 100 Hz a higher capacitive electrical double layer at the electrode/electrolyte interface. Furthermore, the polymer/electrolyte interfacial resistance is several orders of magnitude lower than the resistance of the gold/electrolyte interface. The polymer low interfacial resistance minimizes the intrinsic thermal noise and increases the system sensitivity. The ultra-sensitivity of the polymer-based transducer system was demonstrated by recording the electrical activity of cancer cells of the nervous system.     

A new phenanthrene-based bis-oxime chemosensor for Fe(III) and Cr(III) discrimination

The synthesis of two new 2,7-disubstituted phenanthrene-based bis oximes is described. The ability of these two compound for complexing heavy metal cations have been studied and complexation constants and complex stoichiometry for Cr³⁺ and Fe³⁺ complex have been determined. The fluorescent properties of ligand 2 make this compound able to act as a sensor able to discriminate between Cr³⁺ and Fe³⁺. Detection limits for these two cations have been evaluated.     

Stereodefined synthesis of O3'-labeled uracil nucleosides. 3'-[(17)O]-2'-Azido-2'-deoxyuridine 5'-diphosphate as a probe for the mechanism of inactivation of ribonucleotide reductases

Thermolysis of a 2'-[(16)O]-O-benzoyl-[(17)O]-5'-O-(tert-butyldimethylsilyl)-O(2),3'-cyclouridine derivative gave the more stable 3'-[(17)O]-O-benzoyl-[(16)O]- 5'-O-(tert-butyldimethylsilyl)-O(2),2'-cyclouridine isomer, which was converted into 3'-[(17)O]-2'-azido-2'-deoxyuridine by deprotection and nucleophilic ring opening at C2' with lithium azide. The 5'-diphosphate was prepared by nucleophilic displacement of the 5'-O-tosyl group with tris(tetrabutylammonium) hydrogen pyrophosphate. Model reactions gave (16)O and (18)O isotopomers, and base-promoted hydrolysis of an O(2),2'-cyclonucleoside gave stereodefined access to 3'-[(18)O]-1-(beta-D-arabinofuranosyl)uracil. Inactivation of ribonucleoside diphosphate reductase with 2'-azido-2'-deoxynucleotides results in appearance of EPR signals for a nitrogen-centered radical derived from azide, and 3'-[(17)O]-2'-azido-2'-deoxyuridine 5'-diphosphate provides an isotopomer to perturb EPR spectra in a predictable manner.