Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

Rh(II) catalysed intramolecular C-H insertion of diazo substrates in water: a simple and efficient approach to catalyst reuse

Water is an efficient solvent for the Rh2(OAc)4 catalysed intramolecular C-H insertion of a range of diazo substrates without competitive water insertion. Due to the high solubility and stability of the catalyst in water, the catalyst can be efficiently reused.     

Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

Heterogeneous oxidation of pyrimidine and alkyl thioethers in ionic liquids over mesoporous Ti or Ti/Ge catalysts

Heterogeneous catalytic oxidation of a series of thioethers (2-thiomethylpyrimidine, 2-thiomethyl-4,6-dimethyl-pyrimidine, 2-thiobenzylpyrimidine, 2-thiobenzyl-4,6-dimethylpyrimidine, thioanisole, and n-heptyl methyl sulfide) was performed in ionic liquids by using MCM-41 and UVM-type mesoporous catalysts containing Ti, or Ti and Ge. A range of triflate, tetrafluoroborate, trifluoroacetate, lactate and bis(trifluoromethanesulfonyl)imide-based ionic liquids were used. The oxidations were carried out by using anhydrous hydrogen peroxide or the urea-hydrogen peroxide adduct and showed that ionic liquids are very effective solvents, achieving greater reactivity and selectivity than reactions performed in dioxane. The effects of halide and acid impurities on the reactions were also investigated. Recycling experiments on catalysts were carried out in order to evaluate Ti leaching and its effect on activity and selectivity.     

New Hg2+ and Cu2+ selective chromo- and fluoroionophore based on a bichromophoric azine

[graph: see text] A new probe, 1,4-bis(1-pyrenyl)-2,3-diaza-1,3-butadiene, selectively senses Hg2+ and Cu2+ through two different channels: the yellow-deep-pink color change and the enhancement of the fluorescence with the red shift of the excimer emission, which can visually be discernible by a green fluorescence in the presence of Hg2+ and an orange fluorescence in the presence of Cu2+.     

Useful dual Diels-Alder behavior of 2-azetidinone-tethered aryl imines as azadienophiles or azadienes: a beta-lactam-based stereocontrolled access to optically pure highly functionalized indolizidine systems

Imines derived from 4-oxoazetidine-2-carbaldehydes have been found to be versatile Diels-Alder reagents in that they exhibit two reactivity patterns. 2-Azetidinone-tethered imines undergo diastereoselective reaction with Danishefsky's diene in the presence of different Lewis acids. The effect of the amount of catalyst on the conversion rate as well as on the product ratio has been studied. Under standard reaction conditions, indium(III) chloride and zinc(II) iodide provided the best yields, and indium(III) triflate the highest diastereoselectivity in the Lewis acid promoted aza-Diels-Alder cycloaddition. Treatment of the aforementioned imines with cyclopentadiene, 2,3-dimethyl-1,3-butadiene or 3,4-dihydro-2 H-pyran led to cycloadducts arising from inverse electron-demand condensation involving the beta-lactam-tethered aryl imine as the heterodiene component. In addition, the first methodology for preparing indolizidines from beta-lactams has been developed. This process involves amide bond cleavage of the beta-lactam ring in the aza-Diels-Alder cycloadducts with concomitant cyclization. Full chirality transfer occurs when the reaction is performed with an enantiomerically pure substrate.     

An effective enantioselective approach to the securinega alkaloids: total synthesis of (-)-norsecurinine

[reaction: see text] A highly versatile approach to the enantioselective synthesis of securinega alkaloids is presented. Crucial steps are a palladium-catalyzed enantioselective imide alkylation, a vinylogous Mannich reaction, and a ring-closing metathesis process. Through this strategy, the synthesis of (-)-norsecurinine has been accomplished in nine steps and 11% overall yield.