Ultrasensitive bioelectronic devices based on conducting polymers for electrophysiology studies

Conducting polymer electrodes based on poly(3,4-ethylenedioxythiophene doped with poly(styrenesulfonate) (PEDOT:PSS) are evaluated as transducers to record extracellular signals in cell populations. The performance of the polymer electrode is compared with a gold electrode. A small-signal impedance analysis shows that in the presence of an electrolyte, the polymer electrode establishes for frequencies below 100 Hz a higher capacitive electrical double layer at the electrode/electrolyte interface. Furthermore, the polymer/electrolyte interfacial resistance is several orders of magnitude lower than the resistance of the gold/electrolyte interface. The polymer low interfacial resistance minimizes the intrinsic thermal noise and increases the system sensitivity. The ultra-sensitivity of the polymer-based transducer system was demonstrated by recording the electrical activity of cancer cells of the nervous system.     

A new phenanthrene-based bis-oxime chemosensor for Fe(III) and Cr(III) discrimination

The synthesis of two new 2,7-disubstituted phenanthrene-based bis oximes is described. The ability of these two compound for complexing heavy metal cations have been studied and complexation constants and complex stoichiometry for Cr³⁺ and Fe³⁺ complex have been determined. The fluorescent properties of ligand 2 make this compound able to act as a sensor able to discriminate between Cr³⁺ and Fe³⁺. Detection limits for these two cations have been evaluated.     

Stereodefined synthesis of O3'-labeled uracil nucleosides. 3'-[(17)O]-2'-Azido-2'-deoxyuridine 5'-diphosphate as a probe for the mechanism of inactivation of ribonucleotide reductases

Thermolysis of a 2'-[(16)O]-O-benzoyl-[(17)O]-5'-O-(tert-butyldimethylsilyl)-O(2),3'-cyclouridine derivative gave the more stable 3'-[(17)O]-O-benzoyl-[(16)O]- 5'-O-(tert-butyldimethylsilyl)-O(2),2'-cyclouridine isomer, which was converted into 3'-[(17)O]-2'-azido-2'-deoxyuridine by deprotection and nucleophilic ring opening at C2' with lithium azide. The 5'-diphosphate was prepared by nucleophilic displacement of the 5'-O-tosyl group with tris(tetrabutylammonium) hydrogen pyrophosphate. Model reactions gave (16)O and (18)O isotopomers, and base-promoted hydrolysis of an O(2),2'-cyclonucleoside gave stereodefined access to 3'-[(18)O]-1-(beta-D-arabinofuranosyl)uracil. Inactivation of ribonucleoside diphosphate reductase with 2'-azido-2'-deoxynucleotides results in appearance of EPR signals for a nitrogen-centered radical derived from azide, and 3'-[(17)O]-2'-azido-2'-deoxyuridine 5'-diphosphate provides an isotopomer to perturb EPR spectra in a predictable manner.     

Using piecewise polynomials for faster potential function evaluation

In many molecular dynamics simulation software packages and hardware implementations, piecewise polynomials are used to represent and compute pairwise potential functions efficiently. In this paper, we present three modifications applicable to most interpolations to increase their accuracy. The increased accuracy reduces the amount of data that needs to be stored for each interaction potential, making such interpolations more suitable for architectures with limited memory and/or cache or hardware implementations.     

Determination of the mineral composition of fresh bovine milk from the milk-producing areas located in the State of Sergipe in Brazil and evaluation employing exploratory analysis

In this work, the mineral composition of fresh bovine milk obtained from the milk-producing areas of the Brazilian State of Sergipe was examined. A dry-ashed digestion method and the ICP OES technique were used for the quantification of mineral elements (e.g., Ca, Mg, K, Na, P, Sr and Zn) in 27 samples of milk collected from properties located in milk-producing areas around Nossa Senhora da Glória. The following ranges of values (% m/v) were obtained: 0.063 to 0.117 for Ca; 0.060 to 0.114 for P; 0.024 to 0.064 for Na; and 0.087 to 0.164 for K. The ranges of values (mg L^− 1) for the other mineral elements were also found: 0.68 to 1.89 for Sr; 2.46 to 5.73 for Zn; and 54.2 to 109.9 for Mg. Additionally, the exploratory evaluation of the 27 milk samples was performed using principal component analysis (PCA) involving seven variables dealing with the effect of different management systems (conventional and organic) on milk composition. The results show that there are indeed differences between the mineral composition of milk from properties that use organic practices and those that use conventional management practices.     

Fatty Acid Carboxylate‐ and Anionic Surfactant‐Controlled Delivery Systems That Use Mesoporous Silica Supports

We report the preparation of a MCM‐41 mesoporous material that contains the dye [Ru(bipy)₃]Cl₂ (bipy=bipyridine) inside the mesopores and functionalised with suitable binding groups at the entrance of the pores. Solids S1 – S3 were obtained by the reaction of the mesoporous material with N‐methyl‐N′‐propyltrimethoxysilylimidazolium chloride, N‐phenyl‐N′‐[3‐(trimethoxysilyl)propyl]thiourea, or N‐phenyl‐N′‐[3‐(trimethoxysilyl)propyl]urea, respectively. A study of the dye delivery of these systems in buffered water (pH 7.0, 2‐[4‐(2‐hydroxyethyl)piperazin‐1‐yl]ethanesulfonic acid (HEPES), 10^?3 mol dm^?3) in the presence of a family of carboxylate ions was carried out. In the interaction of the anions with the surface of the solids, the response depends on the characteristics of the binding groups (i.e., imidazolium, urea and thiourea) at the pore outlets and their specific interaction with the corresponding anion. The interaction of long‐chain carboxylate ions with the binding sites at the surface of the solids resulted in a remarkable inhibition of the delivery of the dye. This inhibition was observed clearly for the dodecanoate anion, whereas the octanoate, decanoate, cholate, deoxycholate, glycodeoxycholate and taurocholate anions induced a certain pore blockage that varied according to the solid studied. The interaction of smaller anions, such as acetate, butanoate, hexanoate and octanoate, with the solids had no effect on the dye release process. The possible use of the gating system for the chromo‐fluorogenic detection of anionic surfactants through selective dye delivery inhibition was also explored. Molecular dynamic simulations that use force‐field methods have been made to theoretically study the capping carboxylate mechanism. The calculations are in agreement with the experimental results, thus allowing a representation of the dye delivery inhibition in the presence of long‐chain carboxylate ions.     

A Colorimetric Sensor Array for the Detection of the Date‐Rape Drug γ‐Hydroxybutyric Acid (GHB): A Supramolecular Approach

γ‐Hydroxybutyric acid (GHB), a colourless, odourless and tasteless chemical, has become one of the most dangerous illicit drugs of abuse today. At low doses, this drug is a central nervous system depressant that reduces anxiety and produces euphoria and relaxation, sedating the recipient. There is an urgent need for simple, easy‐to‐use sensors for GHB in solution. Here, we present a colorimetric sensor array based on supramolecular host–guest complexes of fluorescent dyes with organic capsules (cucurbiturils) for the detection of GHB.